The TP-Link MC200CM is a Gigabit Multi-Mode Media Converter supporting up to 550M fiber transmission, ideal for copper-to-fiber conversion with gigabit speeds.
Original price was: ₹4,999.000.₹2,599.000Current price is: ₹2,599.000.
In stock
In stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
TP-Link MC200CM is a Gigabit multi-mode fiber media converter designed to convert 1000BASE-SX fiber connectivity to 1000BASE-T copper Ethernet, or vice versa. It provides a 1000Mbps SC/UPC fiber interface and a 10/100/1000Mbps RJ45 Ethernet interface, making it suitable for extending Gigabit Ethernet networks over multi-mode fiber.
The MC200CM operates at 850nm and supports multi-mode fiber transmission up to 550 meters using 50/125µm fiber or up to 220 meters using 62.5/125µm fiber. TP-Link India currently lists the MC200CM V4/V4.20 family.
MC200CM is designed for network installations where Gigabit Ethernet needs to be transported over existing multi-mode fiber infrastructure.
It converts electrical Gigabit Ethernet signals from the RJ45 interface into optical 1000BASE-SX signals and converts incoming optical signals back into Gigabit Ethernet.
MC200CM supports 1000BASE-SX on the optical side and 1000BASE-T on the copper side. This allows Gigabit Ethernet switches, routers, servers and other network equipment with RJ45 interfaces to communicate over multi-mode optical fiber.
| Interface | Specification |
|---|---|
| Fiber | 1000BASE-SX |
| Copper | 1000BASE-T |
| Fiber Type | Multi-Mode Fiber |
| Optical Wavelength | 850nm |
| Maximum Fiber Speed | 1000Mbps |
TP-Link specifies MC200CM for full wire-speed Gigabit fiber conversion under the supported standards.
The optical interface uses an SC/UPC connector. SC is a common push-pull fiber connector used in structured fiber installations and network infrastructure.
MC200CM is designed for multi-mode fiber, not single-mode fiber. The fiber type should therefore be confirmed before connecting the converter.
MC200CM uses an 850nm shortwave optical wavelength for 1000BASE-SX transmission and reception.
The 850nm optical design is intended for Gigabit Ethernet over multi-mode fiber at the distances specified by TP-Link.
The maximum fiber distance depends on the core/cladding specification of the multi-mode fiber being used.
| Multi-Mode Fiber | Maximum Distance |
|---|---|
| 50/125µm | Up to 550m |
| 62.5/125µm | Up to 220m |
TP-Link’s current India specification states up to 0.55km using 50/125µm fiber and up to 0.22km using 62.5/125µm fiber.
Actual achievable distance can depend on fiber quality, connector losses, splices, optical budget and installation conditions.
MC200CM provides a 10/100/1000Mbps RJ45 Ethernet port with Auto MDI/MDIX support.
| Ethernet Feature | Specification |
|---|---|
| Port | 1× RJ45 |
| Speed | 10/100/1000Mbps |
| Auto-Negotiation | Yes |
| Auto MDI/MDIX | Yes |
| Copper Cable | Cat5/Cat5e or better |
| Maximum Copper Segment | 100m |
This allows MC200CM to connect directly to Gigabit Ethernet equipment such as switches, routers, servers and network appliances.
The RJ45 interface supports Auto MDI/MDIX, automatically detecting the appropriate transmit and receive configuration. This simplifies installation because a crossover Ethernet cable is generally not required.
MC200CM supports automatic negotiation of half-duplex and full-duplex transfer modes. This allows the converter to establish the appropriate operating mode with compatible Ethernet equipment.
TP-Link also specifies compliance with IEEE 802.3ab and IEEE 802.3z for Gigabit Ethernet and Gigabit fiber networking.
MC200CM is useful for extending Gigabit Ethernet between buildings where multi-mode fiber is already available.
A typical deployment can use one MC200CM at each end of the fiber link:
This creates a Gigabit Ethernet connection across the optical fiber link.
MC200CM can be used to extend Gigabit network connectivity across offices, campuses, warehouses and other buildings where multi-mode fiber has already been installed.
MC200CM can also be used in Gigabit CCTV infrastructure where a multi-mode fiber link is required between a remote network switch and the main surveillance network.
For example, a Gigabit switch connected to IP cameras can connect to a remote NVR or core switch through a pair of MC200CM converters and multi-mode fiber.
The actual camera capacity depends on camera bitrate, resolution, frame rate, recording settings and the total traffic carried across the network.
MC200CM can operate as a standalone media converter, so a dedicated chassis is not required for a basic installation.
This makes it suitable for smaller deployments where only one or two media converters are required.
For larger installations, MC200CM can be installed in a compatible TP-Link TL-MC1400 media converter chassis. This provides a centralized approach for installations using multiple TP-Link media converters.
A chassis-based deployment can simplify power distribution, physical organization and maintenance when multiple converters are installed together.
MC200CM is designed to convert the fiber and copper media while maintaining Gigabit Ethernet connectivity. It supports 1000BASE-SX and 1000BASE-T networking according to the applicable IEEE standards.
The actual application throughput will still depend on the connected switches, network traffic, Ethernet cabling and other components in the network.
Front-panel LED indicators make it easier to monitor the operating status of the converter.
| LED | Purpose |
|---|---|
| PWR | Power status |
| Link/Act | Link and network activity status |
These indicators help installers quickly identify power and connectivity conditions during deployment and troubleshooting.
MC200CM uses an external power adapter and does not require PoE for power.
The current TP-Link India specification lists maximum power consumption of 1.66W. The package includes the media converter, power adapter and installation guide.
The compact enclosure is approximately 94.5 × 73 × 27mm, allowing the MC200CM to be installed conveniently near network switches, routers or fiber termination points.
| Physical Feature | Specification |
|---|---|
| Dimensions | 94.5 × 73 × 27mm |
| Installation | Standalone / Compatible Chassis |
| Power | External Power Adapter |
| Maximum Power Consumption | 1.66W |
| Network Standard | Media | Maximum Segment |
|---|---|---|
| 1000BASE-SX | 50/125µm Multi-Mode Fiber | Up to 550m |
| 1000BASE-SX | 62.5/125µm Multi-Mode Fiber | Up to 220m |
| 1000BASE-T | UTP Cat5/Cat5e | Up to 100m |
| 1000BASE-T | 100Ω STP | Up to 100m |
These are TP-Link’s specified maximum segment distances for the supported media.
| Specification | Details |
|---|---|
| Model | TP-Link MC200CM |
| Product Type | Gigabit Multi-Mode Fiber Media Converter |
| Fiber Standard | 1000BASE-SX |
| Copper Standard | 1000BASE-T |
| Fiber Type | Multi-Mode Fiber |
| Fiber Port | 1× 1000Mbps SC/UPC |
| RJ45 Port | 1× 10/100/1000Mbps |
| Optical Wavelength | 850nm |
| 50/125µm Fiber Distance | Up to 550m |
| 62.5/125µm Fiber Distance | Up to 220m |
| RJ45 Cable Distance | Up to 100m |
| Auto MDI/MDIX | Yes |
| Duplex Mode | Auto-Negotiation of Half/Full Duplex |
| LED Indicators | PWR, Link/Act |
| Power Supply | External Power Adapter |
| Maximum Power Consumption | 1.66W |
| Dimensions | 94.5 × 73 × 27mm |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10%–90% non-condensing |
| Chassis Support | Compatible TP-Link TL-MC1400 |
| Certifications | FCC, CE, RoHS |
| Fact | TP-Link MC200CM |
|---|---|
| Product Category | Gigabit Fiber Media Converter |
| Fiber Type | Multi-Mode |
| Fiber Standard | 1000BASE-SX |
| Copper Standard | 1000BASE-T |
| Fiber Connector | SC/UPC |
| Fiber Speed | 1000Mbps |
| RJ45 Speed | 10/100/1000Mbps |
| Optical Wavelength | 850nm |
| 50/125µm Distance | Up to 550m |
| 62.5/125µm Distance | Up to 220m |
| RJ45 Cable Distance | Up to 100m |
| Auto MDI/MDIX | Yes |
| Duplex | Half/Full Duplex Auto-Negotiation |
| PoE | No |
| Standalone Operation | Yes |
| Chassis Support | Yes, TL-MC1400 |
| Feature | MC200CM | MC210CS |
|---|---|---|
| Fiber Type | Multi-Mode | Single-Mode |
| Fiber Standard | 1000BASE-SX | 1000BASE-LX |
| Fiber Connector | SC/UPC | SC/UPC |
| Optical Wavelength | 850nm | 1310nm |
| RJ45 Speed | 10/100/1000Mbps | 10/100/1000Mbps |
| Fiber Distance | Up to 550m with 50/125µm | Up to 20km on current India V6 listing |
Choose MC200CM when your fiber infrastructure is multi-mode and the required Gigabit fiber distance is within the supported 220m/550m range.
Choose MC210CS when you need Gigabit connectivity over longer-distance single-mode fiber.
The MC200CM has a fixed SC/UPC multi-mode fiber interface, while the MC220L uses an SFP slot, allowing the fiber type, wavelength and distance to be selected according to the SFP module installed.
This makes MC220L more flexible for mixed fiber environments, while MC200CM provides a simple fixed 1000BASE-SX multi-mode solution.
TP-Link MC200CM is a Gigabit multi-mode fiber media converter that converts 1000BASE-SX optical fiber to 1000BASE-T copper Ethernet and vice versa.
Yes. MC200CM supports 1000Mbps Gigabit Ethernet on both the optical and copper interfaces.
MC200CM is designed for multi-mode fiber using the 1000BASE-SX standard.
MC200CM uses an SC/UPC fiber connector.
MC200CM operates at 850nm.
It supports up to 550m using 50/125µm multi-mode fiber and up to 220m using 62.5/125µm multi-mode fiber.
No. MC200CM is a fixed 1000BASE-SX multi-mode fiber converter. For single-mode Gigabit fiber, a model such as MC210CS is more appropriate.
Yes. It has one 10/100/1000Mbps RJ45 port with Auto MDI/MDIX.
Yes. It can connect a Gigabit Ethernet switch or other RJ45 Gigabit device to compatible 1000BASE-SX multi-mode fiber.
Yes. It can be used for Gigabit CCTV network backbone or uplink connections where compatible multi-mode fiber infrastructure is available.
No. MC200CM is powered using an external power adapter and does not provide PoE.
Yes. MC200CM can operate as a standalone media converter.
Yes. It is compatible with TP-Link’s TL-MC1400 media converter chassis.
Yes. The RJ45 interface supports Auto MDI/MDIX.
MC200CM is a Gigabit multi-mode converter supporting 1000BASE-SX, while MC110CS is a 100Mbps single-mode converter supporting 100BASE-FX.
TP-Link has released multiple MC200CM hardware revisions over time. The current TP-Link India page lists V4 and V4.20, while TP-Link’s documentation also references later regional revisions. Product availability and exact specifications can vary by region and hardware version.
For firmware and version-specific documentation, always match the hardware version printed on the actual unit with the corresponding TP-Link regional support page.
TP-Link MC200CM is a straightforward Gigabit fiber media converter for converting 1000BASE-SX multi-mode fiber to 10/100/1000Mbps copper Ethernet. With an 850nm optical interface, SC/UPC connector, up to 550m transmission over 50/125µm fiber, Auto MDI/MDIX and standalone or chassis deployment, it is well suited to building-to-building links, campus networks, office infrastructure, switch uplinks and Gigabit CCTV networks.
For long-distance single-mode Gigabit fiber, choose an appropriate single-mode converter instead. Explore the complete TP-Link networking products range at IPVoice Technologies.
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account In stock
Reviews
Clear filtersThere are no reviews yet.