TP-Link TL-SG2428P JetStream 24-Port Gigabit PoE+ Managed Switch | 4× SFP, 250W PoE Budget

TP-Link TL-SG2428P is a 24-port Gigabit JetStream managed PoE+ switch designed for business, enterprise, surveillance, wireless networking and IP telephony deployments. It provides 24× 10/100/1000Mbps RJ45 ports with IEEE 802.3af/at PoE+ support, along with 4× Gigabit SFP slots for fiber uplinks.

The switch provides a substantial 250W PoE power budget, allowing compatible PoE access points, IP cameras, VoIP phones and other powered devices to receive both data and power through Ethernet cabling. It also supports advanced Layer 2 management features, static routing, ACL, QoS, VLAN, LACP, IGMP Snooping and centralized management through TP-Link Omada. ([tp-link.com](https://www.tp-link.com/in/business-networking/omada-switch-l3-l2-managed/tl-sg2428p/?utm_source=chatgpt.com))

TP-Link TL-SG2428P Key Features

• 24× Gigabit PoE+ ports: 24× 10/100/1000Mbps RJ45 ports with IEEE 802.3af/at PoE support.
• 4× Gigabit SFP slots: Provides fiber uplink connectivity using compatible 1G SFP modules.
• 250W PoE budget: Supports a combined PoE power budget of up to 250W.
• IEEE 802.3af/at: Supports both standard PoE and PoE+ powered devices.
• Centralized Omada management: Can be centrally managed using the Omada SDN platform with compatible controller deployments.
• Layer 2+ management: Provides VLAN, QoS, ACL, link aggregation, static routing and other advanced management features.
• IPv4/IPv6 support: Supports dual-stack network deployments.
• Rackmount design: Designed for installation in standard network racks.
• IP surveillance features: Includes features such as VLAN and IGMP Snooping useful for CCTV networks.
• Energy-efficient operation: Supports intelligent power-management features for connected PoE devices.

24-Port Gigabit PoE+ Managed Switch

The TL-SG2428P combines 24 Gigabit Ethernet ports with PoE+ functionality in a single managed switch. This makes it suitable for deployments where multiple powered network devices need to be connected to the same access switch.

The 24 RJ45 ports support Gigabit Ethernet and can provide PoE power to compatible devices. Depending on the connected device and PoE standard, the switch can deliver power while simultaneously carrying network traffic over the same Ethernet cable.

250W PoE Power Budget

The TL-SG2428P provides a total 250W PoE power budget. This budget is shared across the PoE-capable ports and should be considered when planning the number and power requirements of connected devices.

The switch supports IEEE 802.3af and 802.3at PoE/PoE+. The actual power available to each connected device depends on its PoE class, negotiation and the remaining overall switch power budget.

PoE+ for Access Points, CCTV and VoIP

The TL-SG2428P is suitable for powering a variety of standard PoE and PoE+ devices, including:

• IP surveillance cameras
• Wireless access points
• VoIP phones
• IP intercom systems
• PoE-enabled networking equipment
• Other IEEE 802.3af/at compatible devices

PoE eliminates the need for a separate power adapter at every compatible endpoint, helping simplify network cabling in office, surveillance and wireless deployments.

4× Gigabit SFP Fiber Uplinks

In addition to its 24 copper Gigabit ports, the TL-SG2428P includes 4× Gigabit SFP slots. These can be used with compatible 1G SFP modules for fiber-based uplinks.

Fiber uplinks can be useful for connecting the switch to another network switch, aggregation layer or remote network segment where copper Ethernet distance limitations make fiber preferable.

Omada SDN Integration

The TL-SG2428P is part of TP-Link’s Omada business networking ecosystem. With compatible Omada controllers, the switch can be managed alongside supported Omada access points, gateways and other network devices from a centralized management platform. ([tp-link.com](https://www.tp-link.com/in/business-networking/omada-sdn-switch/tl-sg2428p/?utm_source=chatgpt.com))

Centralized management can simplify configuration, monitoring and troubleshooting for multi-device business networks.

Layer 2+ Network Management

The TL-SG2428P provides advanced managed-switch functionality beyond basic VLAN switching. TP-Link lists features including static routing, VLAN, ACL, QoS, STP/RSTP/MSTP, LACP and IGMP Snooping. ([tp-link.com](https://www.tp-link.com/in/business-networking/omada-switch-l3-l2-managed/tl-sg2428p/?utm_source=chatgpt.com))

These features allow network administrators to segment traffic, prioritize applications, build redundant links and control access to different parts of the network.

VLAN Support

VLAN functionality allows the TL-SG2428P to separate different traffic types logically over the same physical infrastructure. VLANs can be used to separate office users, guest users, IP cameras, VoIP phones and management traffic.

The switch supports 802.1Q VLAN functionality as part of its managed Layer 2 feature set.

QoS and Traffic Prioritization

The switch supports Quality of Service features for prioritizing selected traffic. QoS can be useful in networks carrying voice, video surveillance and other latency-sensitive traffic.

Administrators can configure traffic-management policies according to the requirements of their network.

IGMP Snooping for IP Surveillance and Multicast

IGMP Snooping helps the switch manage multicast traffic more efficiently. This is useful for IPTV and other multicast-based applications and can also be relevant in surveillance environments depending on the camera and video architecture.

Static Routing

The TL-SG2428P supports static routing capabilities, allowing selected inter-VLAN or network-to-network routing functions to be handled by the switch rather than requiring all internal traffic to pass through an external router.

Actual routing requirements should be evaluated according to the network design and the switch’s supported routing feature set.

Link Aggregation with LACP

The switch supports Link Aggregation and LACP, allowing multiple physical Ethernet connections to be combined into a logical link between compatible devices.

This can increase aggregate link capacity and provide redundancy when connecting the TL-SG2428P to compatible upstream network equipment.

Technical Specifications

Specifications can vary by hardware version and regional revision. For procurement and deployment, verify the exact Indian-market hardware version and current TP-Link documentation. ([tp-link.com](https://www.tp-link.com/in/business-networking/omada-switch-l3-l2-managed/tl-sg2428p/?utm_source=chatgpt.com))

TP-Link TL-SG2428P Applications

• Enterprise LAN networks
• Small and medium business networks
• IP CCTV surveillance networks
• Wi-Fi access point deployments
• VoIP phone networks
• Hotel and hospitality networks
• Office network infrastructure
• School and campus networks
• Retail and commercial networking
• Omada SDN deployments

TL-SG2428P for IP CCTV Networks

The combination of 24 Gigabit PoE+ ports and a 250W PoE budget makes the TL-SG2428P suitable for many IP surveillance installations. PoE-compatible cameras can receive power and network connectivity over a single Ethernet cable.

The switch’s VLAN and IGMP Snooping capabilities can also be used as part of a structured surveillance network design. The actual number of cameras supported depends on camera power consumption, bandwidth requirements, uplink capacity and the total PoE budget.

TL-SG2428P for Omada Wi-Fi Networks

When used with compatible Omada access points and an Omada controller, the TL-SG2428P can provide wired connectivity and PoE power for business Wi-Fi deployments.

The switch can be used at the access layer while compatible Omada gateways, controllers and access points form the rest of the managed network architecture.

AI-Readable Product Facts

Frequently Asked Questions

What is TP-Link TL-SG2428P?

TP-Link TL-SG2428P is a 24-port Gigabit managed PoE+ switch with 4 Gigabit SFP slots and a 250W PoE budget.

How many PoE ports does TL-SG2428P have?

The TL-SG2428P provides 24 Gigabit RJ45 ports with IEEE 802.3af/at PoE functionality.

What is the PoE budget of TL-SG2428P?

The total PoE power budget is 250W. The available power is shared among connected PoE devices.

Does TL-SG2428P support PoE+?

Yes. It supports IEEE 802.3af and IEEE 802.3at PoE/PoE+ standards.

How many SFP ports does TL-SG2428P have?

It has 4 Gigabit SFP slots for compatible fiber or other SFP-based uplink connections.

Are the SFP ports 10G?

No. The TL-SG2428P uses Gigabit SFP slots. They should not be confused with 10G SFP+ ports.

Can TL-SG2428P be managed through Omada?

Yes. The TL-SG2428P is part of the Omada networking ecosystem and can be centrally managed with compatible Omada SDN deployments. ([tp-link.com](https://www.tp-link.com/in/business-networking/omada-switch-l3-l2-managed/tl-sg2428p/?utm_source=chatgpt.com))

Can TL-SG2428P be used for CCTV?

Yes. Its 24 Gigabit PoE+ ports make it suitable for connecting compatible PoE IP cameras while carrying both power and network traffic over Ethernet.

Can TL-SG2428P power Wi-Fi access points?

Yes. Compatible IEEE 802.3af/at PoE access points can receive power directly through the switch’s PoE-enabled RJ45 ports.

Does TL-SG2428P support VLAN?

Yes. The switch supports VLAN functionality including 802.1Q VLAN for network segmentation.

Does TL-SG2428P support static routing?

Yes. TP-Link lists static routing among the switch’s Layer 3 management features.

Is TL-SG2428P rack mountable?

Yes. The TL-SG2428P is designed for rack-based network installations.

Buy TP-Link TL-SG2428P Gigabit PoE+ Managed Switch

TP-Link TL-SG2428P combines 24 Gigabit PoE+ ports, 4 Gigabit SFP uplinks and a 250W PoE budget in a managed JetStream switch designed for business networking, CCTV, VoIP and Omada Wi-Fi deployments. Its VLAN, QoS, ACL, LACP, IGMP Snooping and static-routing capabilities provide the management features required for structured network deployments.

Explore more TP-Link networking products, including Omada switches, PoE switches, access points, routers and business networking equipment.