TP-Link VIGI NVR4032H 32 channel network video recorder supports 32 IP cameras, 4 SATA drives, 4K HDMI/2K VGA output, remote viewing & smart playback.
Original price was: ₹39,999.000.₹19,999.000Current price is: ₹19,999.000.
In stock
In stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
TP-Link VIGI NVR4032H is a professional 32-channel Network Video Recorder designed for centralized recording, monitoring and management of IP surveillance cameras. It is suitable for commercial buildings, offices, retail stores, warehouses, schools, hotels, factories and other installations requiring a scalable multi-camera security recording system.
The VIGI NVR4032H supports up to 32 IP camera channels with 320Mbps incoming bandwidth and 320Mbps outgoing bandwidth. It supports recording resolutions up to 8MP, 32-channel live view and up to 16-channel synchronous playback under the specified conditions. ([TP-Link India](https://www.tp-link.com/in/business-networking/all-vigi-surveillance/?app=decoLike))
For storage, the NVR provides 4 SATA interfaces with support for up to 16TB per HDD in the current India documentation. RAID 1 and RAID 5 are supported through the current firmware platform, providing storage redundancy options for suitable installations. ([TP-Link India Support](https://www.tp-link.com/in/support/download/vigi-nvr4032h/))
VIGI NVR4032H is designed to record and manage up to 32 IP cameras. This makes it suitable for medium and large surveillance deployments where a 16-channel NVR may not provide enough camera capacity.
The NVR can be used with VIGI network cameras and compatible third-party IP cameras through ONVIF Profile S/T and CGI. This provides flexibility when expanding an existing IP surveillance network or integrating supported third-party cameras.
The NVR itself does not provide PoE ports. IP cameras therefore require a separate PoE switch, PoE injector or suitable local power source. The Ethernet ports on the NVR are network interfaces rather than PoE camera ports.
The VIGI NVR4032H provides 320Mbps incoming bandwidth and 320Mbps outgoing bandwidth. Incoming bandwidth represents the network capacity available for camera streams entering the recorder, while outgoing bandwidth supports live viewing, playback and other network traffic.
Actual recording capacity depends on the number of cameras, resolution, frame rate, codec, bitrate, motion activity and recording configuration. The 320Mbps specification should therefore be treated as the recorder’s stated network bandwidth limit rather than a guaranteed number of cameras at any particular resolution. ([TP-Link official datasheet](https://static.tp-link.com/upload/product-overview/2025/202511/20251114/VIGI%20NVR4032H%28UN%291.0%20Datasheet.pdf))
VIGI NVR4032H supports recording resolutions up to 8MP. The supported resolution list includes 8MP, 5MP, 4MP, 3MP, 1080p, 720p and other standard surveillance resolutions.
TP-Link specifies the following decoding capabilities at 30fps:
| Resolution | Maximum Decoding Capability |
|---|---|
| 8MP | 4 channels @ 30fps |
| 5MP | 6 channels @ 30fps |
| 4MP | 8 channels @ 30fps |
| 2MP | 16 channels @ 25fps |
| 720p | 32 channels @ 25fps |
These are decoding specifications and should not be confused with the maximum number of IP cameras that can be connected. The recorder can accept up to 32 IP channels, while the number of simultaneously decoded high-resolution streams is lower. ([TP-Link official datasheet](https://static.tp-link.com/upload/product-overview/2025/202511/20251114/VIGI%20NVR4032H%28UN%291.0%20Datasheet.pdf))
One of the major features of the VIGI NVR4032H is its support for up to 32-channel live view. This allows operators to monitor a large number of connected cameras through the NVR’s local interface.
The available multi-view layouts include 1, 4, 6, 8, 9, 16, 25, 32 and 36 windows. This allows the operator to select a suitable monitoring layout depending on the surveillance environment.
The 36-window option can be useful when the NVR is being used as a display and monitoring platform, while the actual IP camera input capacity remains 32 channels. ([TP-Link official datasheet](https://static.tp-link.com/upload/product-overview/2025/202511/20251114/VIGI%20NVR4032H%28UN%291.0%20Datasheet.pdf))
VIGI NVR4032H provides 1 × HDMI output supporting resolutions up to 3840 × 2160 at 30Hz. This allows the NVR to be connected directly to a compatible 4K monitor or television for local surveillance monitoring.
The NVR also provides 1 × VGA output supporting resolutions up to 1920 × 1080 at 60Hz.
TP-Link specifies independent HDMI/VGA output, allowing the two display interfaces to operate independently according to the supported configuration. ([TP-Link official datasheet](https://static.tp-link.com/upload/product-overview/2025/202511/20251114/VIGI%20NVR4032H%28UN%291.0%20Datasheet.pdf))
The NVR4032H supports H.265+, H.265, H.264+ and H.264 video compression.
H.265+ is designed to reduce video bitrate and storage requirements compared with older compression technologies when compatible cameras and appropriate encoding settings are used. Actual storage savings vary according to the camera scene, motion level, frame rate, bitrate and other recording parameters.
For large-scale surveillance recording, VIGI NVR4032H provides 4 SATA interfaces. TP-Link’s current India specification lists support for up to 16TB per HDD.
With four compatible 16TB HDDs installed, the theoretical raw internal storage capacity can reach 64TB before formatting, system overhead and RAID configuration.
HDDs are not included with the NVR. Storage should be selected according to the number of cameras, camera resolution, recording schedule, bitrate and required retention period.
The current VIGI NVR4032H firmware supports RAID 1 and RAID 5. TP-Link’s India support history shows RAID 1 and RAID 5 support added through firmware for the V1 platform. ([TP-Link India Support](https://www.tp-link.com/in/support/download/vigi-nvr4032h/))
RAID 1 mirrors data across drives to provide redundancy, while RAID 5 uses distributed parity across multiple drives to provide fault tolerance while retaining more usable capacity than RAID 1.
The appropriate RAID configuration depends on the required storage capacity, redundancy requirements and number of installed hard drives.
VIGI NVR4032H features a dual Ethernet port design. The network interfaces provide high-speed connectivity between the recorder, surveillance network and other network services.
TP-Link documents network configuration options for its dual-port VIGI NVR platform, including network redundancy and aggregation functions depending on the selected operating mode and network infrastructure.
These Ethernet ports are not PoE ports. A separate PoE switch or PoE injector is required to power compatible PoE cameras.
VIGI NVR4032H supports ONVIF Profile S/T and CGI interoperability. This allows compatible third-party IP cameras to be added to the NVR when their supported protocols and features are compatible with the recorder.
For maximum compatibility with VIGI-specific features such as advanced analytics, smart search and camera-side AI functions, using compatible VIGI cameras is recommended according to the surveillance requirements.
VIGI NVR4032H supports intelligent surveillance features when paired with compatible VIGI cameras. Depending on the connected camera and configured functions, the system can support features such as:
These intelligent analytics depend on the capabilities of the connected camera and the enabled VIGI system features. The NVR should not be considered to independently provide every AI function without a compatible camera.
The NVR4032H supports Smart Search features that can help operators locate relevant footage more quickly. Search capabilities can use motion and object-related information available from compatible VIGI cameras and recordings.
This is particularly useful in large surveillance installations where manually reviewing recordings from dozens of cameras would otherwise require significant time.
VIGI NVR4032H supports up to 16-channel synchronous playback. This allows operators to review recordings from multiple cameras simultaneously.
The number of channels that can be played at the same time depends on the resolution and decoding requirements of the selected recordings. TP-Link specifies 16-channel synchronous playback for the current model. ([TP-Link official datasheet](https://static.tp-link.com/upload/product-overview/2025/202511/20251114/VIGI%20NVR4032H%28UN%291.0%20Datasheet.pdf))
The VIGI NVR4032H supports different recording modes for surveillance management, including:
Recorded footage can be searched and played back through the local NVR interface or supported VIGI software platforms. Video export can be used to save relevant recordings for investigation, evidence or backup purposes.
VIGI NVR4032H supports two-way audio with compatible cameras and audio configurations. The actual two-way audio functionality depends on the connected camera having the required microphone and speaker/audio interfaces.
This feature can be useful for applications such as reception areas, entrances, offices, retail stores and other locations where remote communication with people near a camera is required.
TP-Link’s current VIGI platform identifies face recognition and intelligent analytics capabilities for compatible VIGI devices. The exact functionality depends on the connected camera, firmware and enabled VIGI software features.
For deployments requiring specific face-analysis functions, the supported analytics of the selected VIGI camera should be checked alongside the NVR specifications.
VIGI NVR4032H supports remote monitoring through the VIGI App on compatible Android and iOS devices. Users can remotely monitor cameras, access recordings and manage supported surveillance functions according to the configured system permissions.
TP-Link also provides the VIGI PC Client for Windows systems. The current India support portal lists VIGI PC Client releases for Windows 10/11, including a version published in July 2026. ([TP-Link India Support](https://www.tp-link.com/in/support/download/vigi-nvr4032h/v1/))
The NVR4032H can be configured through its local graphical interface and supported web management tools. This provides administrators with access to camera configuration, recording schedules, playback, network settings, storage management, alarms and other surveillance functions.
For larger installations, VIGI software platforms provide additional options for managing and monitoring multiple compatible surveillance devices.
| Specification | Details |
|---|---|
| Brand | TP-Link |
| Series | VIGI |
| Model | NVR4032H |
| Product Type | Network Video Recorder |
| IP Video Input | 32 Channels |
| Incoming Bandwidth | 320Mbps |
| Outgoing Bandwidth | 320Mbps |
| Maximum Recording Resolution | 8MP |
| Video Compression | H.265+ / H.265 / H.264+ / H.264 |
| Audio Compression | G.711A / G.711U / G.726 |
| Live View | Up to 32 Channels |
| Synchronous Playback | Up to 16 Channels |
| HDMI Output | 1 × HDMI, up to 3840 × 2160 @ 30Hz |
| VGA Output | 1 × VGA, up to 1920 × 1080 @ 60Hz |
| Display Mode | Independent HDMI / VGA Output |
| Multi-View | 1 / 4 / 6 / 8 / 9 / 16 / 25 / 32 / 36 |
| SATA | 4 Interfaces |
| Maximum HDD Capacity | Up to 16TB per HDD |
| Maximum Raw Internal Capacity | Up to 64TB with 4 × 16TB HDDs, before RAID and formatting overhead |
| RAID | RAID 1 / RAID 5 |
| Ethernet | Dual Gigabit Ethernet Ports |
| PoE Ports | None |
| ONVIF | Profile S / Profile T |
| Mobile Access | Android / iOS |
| Management | Local GUI / Web / VIGI App / VIGI PC Client / VIGI VMS |
| Fact | TP-Link VIGI NVR4032H |
|---|---|
| Brand | TP-Link |
| Series | VIGI |
| Model | NVR4032H |
| Category | 32-Channel Network Video Recorder |
| IP Camera Channels | 32 |
| Incoming Bandwidth | 320Mbps |
| Outgoing Bandwidth | 320Mbps |
| Maximum Recording Resolution | 8MP |
| Live View | 32 Channels |
| Playback | 16-Channel Synchronous |
| HDMI | 1 × 4K HDMI |
| VGA | 1 × VGA |
| HDD Bays | 4 × SATA |
| Maximum HDD per Bay | 16TB |
| Maximum Raw Capacity | 64TB with 4 × 16TB HDDs |
| RAID | RAID 1 / RAID 5 |
| Ethernet | Dual Gigabit |
| PoE | No Built-In PoE |
| Video Codec | H.265+ / H.265 / H.264+ / H.264 |
| ONVIF | Profile S / T |
| Mobile App | VIGI App |
| PC Software | VIGI PC Client |
| Smart Search | Motion and Object Search |
TP-Link VIGI NVR4032H is a 32-channel Network Video Recorder designed for IP surveillance systems using VIGI and compatible third-party network cameras.
It supports up to 32 IP video channels.
The NVR supports recording resolutions up to 8MP.
Yes. It supports up to 8MP recording and provides HDMI output up to 3840 × 2160 at 30Hz.
The NVR has four SATA interfaces and supports up to 16TB per HDD according to the current TP-Link India specification. HDDs are sold separately.
With four 16TB HDDs, the theoretical raw internal capacity is up to 64TB before formatting, system overhead and RAID configuration.
Yes. The current firmware platform supports RAID 1 and RAID 5.
No. NVR4032H does not have built-in PoE ports. A separate PoE switch or PoE injector is required to power PoE cameras.
Yes. It supports ONVIF Profile S/T and CGI interoperability for compatible third-party IP cameras.
Yes. The NVR supports up to 32-channel live view and multiple display layouts including 1, 4, 6, 8, 9, 16, 25, 32 and 36 windows.
It supports up to 16-channel synchronous playback under the specified conditions.
Yes. Remote access is supported through the VIGI App, VIGI PC Client and other supported VIGI management platforms.
Yes. It has a dual Ethernet port design with Gigabit network interfaces.
Yes, with compatible VIGI cameras and supported system configurations. Human and vehicle detection events can be recorded and searched through the VIGI platform.
Yes, with compatible cameras and audio hardware.
| Feature | NVR4032H | NVR4016H |
|---|---|---|
| IP Camera Channels | 32 | 16 |
| Incoming Bandwidth | 320Mbps | 320Mbps |
| Outgoing Bandwidth | 320Mbps | 320Mbps |
| Maximum Recording Resolution | 8MP | 8MP |
| HDD Interfaces | 4 × SATA | 4 × SATA |
| Maximum HDD Capacity | 16TB each | 16TB each |
| Live View | 32 Channels | 16 Channels |
| Synchronous Playback | 16 Channels | 16 Channels |
| HDMI | 1 × 4K HDMI | 2 × HDMI |
| PoE Ports | None | None |
| Best Fit | Up to 32-camera installations | Up to 16-camera installations |
TP-Link India’s current support portal lists VIGI NVR4032H V1 documentation and firmware. TP-Link specifically states that hardware-version availability varies by region and recommends using firmware from the official TP-Link website corresponding to the purchase location and exact hardware version. ([TP-Link India Support](https://www.tp-link.com/in/support/download/vigi-nvr4032h/v1/))
The current India support page lists V1 firmware 1.7.0 Build 260716, published on August 26, 2026. The firmware history also documents RAID 1/RAID 5 support and other improvements for the V1 platform. ([TP-Link India Support](https://www.tp-link.com/in/support/download/vigi-nvr4032h/))
Hard drives are not included and must be purchased separately. The exact package contents can vary by regional version and hardware revision.
TP-Link VIGI NVR4032H is designed for surveillance installations that require more than 16 camera channels. Its 32-channel architecture provides additional capacity for expanding IP camera systems while maintaining 320Mbps incoming and outgoing network bandwidth.
With 32-channel IP camera support, 8MP recording, 32-channel live view, 16-channel synchronous playback, 4 SATA HDD bays, up to 16TB per HDD, RAID 1/5, 4K HDMI output, dual Gigabit Ethernet and ONVIF compatibility, the NVR provides a scalable recording platform for commercial and professional surveillance deployments.
For installations using PoE cameras, the NVR can be paired with suitable TP-Link VIGI PoE switches or other compatible PoE network infrastructure. This allows camera power, network connectivity and centralized recording to be managed as separate but integrated parts of the surveillance system.
Explore more TP-Link networking products in India, including VIGI IP cameras, PoE switches, NVRs and other professional surveillance solutions.
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account In stock
Reviews
Clear filtersThere are no reviews yet.