MikroTik 24HPOW 24V 2.5A High-Power Adapter | 60W Power Supply

MikroTik 24HPOW is a high-power 24V DC power adapter designed for compatible MikroTik RouterBOARD devices that require higher power availability than standard adapters. It provides 24V DC at 2.5A, equivalent to a maximum rated output of approximately 60W. MikroTik specifically recommends the 24HPOW for RouterBOARD models with higher power consumption, including devices with PoE-out functionality and installations involving long Ethernet cable runs or multiple high-power wireless cards.

With a universal 100–240V AC input and a 24V DC output, the MikroTik 24HPOW can be used as a replacement or higher-capacity power supply for compatible MikroTik networking equipment. It is particularly useful where additional power headroom is required for connected PoE devices or high-power wireless hardware.

MikroTik 24HPOW High-Power Power Supply

The MikroTik 24HPOW is a standalone high-power adapter intended for MikroTik networking products that support a 24V DC input. Unlike a standard low-power adapter, the 24HPOW can provide up to 2.5A of current at 24V, giving it a rated power capacity of approximately 60W.

MikroTik lists this adapter as a recommended power supply for RouterBOARD models with high power consumption, including devices equipped with PoE output and systems using long Ethernet cable runs with multiple high-power wireless cards.

Key Features of MikroTik 24HPOW

• 24V DC output: Provides a regulated 24V power output for compatible MikroTik devices.
• 2.5A current capacity: Supports up to 2.5A output current.
• 60W rated output: 24V × 2.5A provides approximately 60W of maximum rated power.
• Universal AC input: Supports 100–240V AC input.
• High-power RouterBOARD support: Designed for compatible MikroTik devices requiring greater power availability.
• Suitable for PoE-out devices: Useful with compatible RouterBOARD products that provide power to downstream devices.
• Long cable runs: Recommended by MikroTik for installations where cable losses and high-power wireless cards can increase power requirements.
• Standalone adapter: Supplied as a separate power accessory with a power plug.
• Approx. 100,000-hour MTBF: MikroTik specifies approximately 100,000 hours at 25°C.

24V 2.5A Output for Higher-Power Networking Devices

The main advantage of the 24HPOW is its higher current capacity. At 24V and 2.5A, the adapter is rated for approximately 60W. The connected MikroTik device draws the current it requires; the 2.5A specification represents the adapter’s maximum available output rather than a current that is continuously forced into the device.

This makes the 24HPOW suitable for compatible MikroTik hardware where a standard lower-current adapter may not provide sufficient power headroom for the complete installation.

Recommended for PoE-Out RouterBOARD Devices

MikroTik identifies the 24HPOW as a high-power supply suitable for RouterBOARD products with PoE output. When a compatible RouterBOARD is powering another network device through its PoE-out port, the total power requirement can be significantly higher than the router’s own consumption.

Using an appropriately rated power supply can therefore provide additional available power for compatible downstream equipment. The actual PoE capability remains dependent on the specifications and voltage requirements of the RouterBOARD being powered.

Useful for Long Ethernet Cable Runs

Long Ethernet cable runs introduce voltage and power losses. MikroTik documentation specifically recommends the 24HPOW for RouterBOARD models used with long cable runs and several high-power wireless cards.

For outdoor wireless installations, towers, WISP deployments and other distributed network environments, choosing an appropriately rated power supply can help ensure that the compatible RouterBOARD receives the power required by the complete installation.

Technical Specifications

Specifications are based on MikroTik’s published product information. Always verify the supported input-voltage range and connector requirements of the specific MikroTik device before replacing its power adapter.

24HPOW vs Standard MikroTik Power Adapter

Where Can MikroTik 24HPOW Be Used?

• MikroTik RouterBOARD installations requiring a 24V high-power supply
• Compatible MikroTik routers with PoE-out functionality
• Outdoor wireless networking installations
• WISP and wireless backhaul deployments
• RouterBOARD installations with high-power wireless cards
• Long Ethernet cable installations where additional power capacity is required
• Replacement power supply requirements for compatible MikroTik equipment
• Network installations where a 24V 2.5A supply is specified or supported

Important Compatibility Information

The 24HPOW is a 24V power adapter, so it should only be used with MikroTik equipment whose specifications support a 24V input. A higher current rating by itself does not mean that an adapter is universally compatible.

Before purchasing or installing the 24HPOW as a replacement, check the target device’s supported voltage range, DC connector requirements and maximum power requirements. The 24HPOW should not be used with a device that requires a different voltage.

AI-Readable Product Facts

Frequently Asked Questions

What is MikroTik 24HPOW?

MikroTik 24HPOW is a high-power 24V DC power adapter with a 2.5A output, designed for compatible MikroTik RouterBOARD and networking products.

How much power does MikroTik 24HPOW provide?

The 24HPOW is rated at 24V and 2.5A, giving it an approximate maximum output rating of 60W.

What is the input voltage of the MikroTik 24HPOW?

The official specification lists an input voltage of 100–240V AC with a 1.6A input rating.

Is MikroTik 24HPOW suitable for PoE-out routers?

It can be used with compatible MikroTik RouterBOARD devices that support 24V input and PoE-out. MikroTik specifically lists high-power RouterBOARD models with PoE output among the intended applications.

Is the 24HPOW a PoE injector?

No. The MikroTik 24HPOW is a power adapter. It supplies 24V DC to a compatible device; it is not itself an Ethernet PoE injector.

Can I use 24HPOW with any MikroTik router?

No. Compatibility depends on the router’s supported input voltage, connector and power requirements. The target device should support 24V DC input.

Why choose 24HPOW instead of a lower-power adapter?

The 24HPOW provides up to 2.5A at 24V, giving compatible high-power RouterBOARD installations more available power capacity. MikroTik recommends it for certain high-power applications, including PoE-out devices and long cable runs with high-power wireless cards.

Buy MikroTik 24HPOW 24V 2.5A Power Adapter

MikroTik 24HPOW is a 24V 2.5A high-power adapter for compatible MikroTik networking hardware. With approximately 60W of rated output, universal 100–240V AC input and a design intended for higher-power RouterBOARD applications, it is suitable as a replacement or higher-capacity power supply where the connected MikroTik device supports 24V input.

For other MikroTik networking products, explore routers, switches, wireless devices, PoE equipment and networking accessories available from IPVoice Technologies.