MikroTik hAP ax lite L41G-2axD AX600 WiFi 6 Router
The MikroTik hAP ax lite L41G-2axD is a compact and affordable WiFi 6 router designed for homes, apartments, small offices, hotels, guest networks and other indoor networking environments. It combines modern 802.11ax wireless technology with four Gigabit Ethernet ports and MikroTik RouterOS v7.
Unlike dual-band WiFi 6 routers, the hAP ax lite operates on the 2.4 GHz wireless band only. Its 2×2 WiFi 6 radio supports a maximum theoretical PHY rate of 574 Mbps, giving the device an AX600 wireless classification. It also provides four 10/100/1000 Gigabit Ethernet ports for wired connectivity.
WiFi 6 AX600 Wireless Connectivity
The MikroTik hAP ax lite uses the 802.11ax WiFi 6 standard on the 2.4 GHz band. The radio uses a 2×2 configuration and supports a maximum theoretical data rate of up to 574 Mbps.
| Wireless Specification |
Details |
| Wireless Band |
2.4 GHz |
| WiFi Standard |
802.11b/g/n/ax |
| WiFi Generation |
WiFi 6 |
| Wireless Configuration |
2×2 Dual-Chain |
| Maximum PHY Rate |
574 Mbps |
| Antenna Gain |
Up to 4.3 dBi |
| WiFi Class |
AX600 |
Important: the hAP ax lite is 2.4 GHz only. It does not have a separate 5 GHz radio. The 574 Mbps figure is a theoretical PHY rate; actual wireless throughput depends on client devices, channel conditions, interference, distance and configuration.
4× Gigabit Ethernet Ports
The MikroTik hAP ax lite includes four 10/100/1000 Gigabit Ethernet ports. These ports can be used for WAN connectivity, computers, switches, printers, IP cameras, access points and other wired network devices.
The four-port Gigabit Ethernet design gives the hAP ax lite significantly more wired connectivity than compact routers limited to Fast Ethernet. MikroTik’s published testing also demonstrates multi-gigabit aggregate bridging and routing performance under specific fast-path test conditions.
Compact WiFi 6 Router for Everyday Networking
The hAP ax lite is designed for users who want the newer WiFi 6 standard without moving to a larger or more expensive dual-band router.
Its compact enclosure makes it suitable for apartments, homes, hotel rooms, small offices, temporary networks and other installations where space is limited.
The device measures approximately 124 × 100 × 54 mm and uses passive cooling. The official documentation specifies indoor use and an IPX0 protection rating.
Dual-Core ARM Processor
The hAP ax lite is powered by a dual-core Qualcomm IPQ-5010 processor running at a nominal frequency of 800 MHz according to the current product specification.
It includes 256 MB RAM and 128 MB NAND storage. The ARM-based hardware platform is designed to run RouterOS v7 and its supported routing, firewall, wireless and network-management features.
RouterOS v7 Level 4
The MikroTik hAP ax lite runs RouterOS v7 with a Level 4 license.
RouterOS gives the device considerably more configuration flexibility than a basic consumer wireless router. Depending on the network design, administrators can configure routing, NAT, firewall rules, DHCP, VLANs, wireless settings, bandwidth management, VPN features and other supported networking services.
The operating system is preinstalled and licensed, so no separate RouterOS license purchase is required. MikroTik also provides software updates for the life of the product or at least five years from the date of purchase.
4.3 dBi Antenna Gain
The hAP ax lite features up to 4.3 dBi antenna gain on its 2.4 GHz wireless radio. The radio uses a dual-chain configuration.
Antenna gain alone does not determine the exact coverage area. Actual coverage depends on walls, building materials, interference, router placement, client antenna capability and local regulatory transmit-power limits.
Gigabit Network Connectivity
The four Gigabit Ethernet ports allow the hAP ax lite to connect multiple wired devices while simultaneously providing WiFi 6 wireless connectivity.
Typical wired connections can include:
- Internet/WAN connection
- Desktop and laptop computers
- Network switches
- IP cameras
- Network printers
- NAS and storage devices
- Smart TVs and media devices
- Other Ethernet-based equipment
USB-C Power Input
One of the distinctive features of the hAP ax lite is its USB-C power input. The device uses a 5V USB-C power connection rather than a conventional barrel-type DC input.
MikroTik specifies a 5V input and maximum power consumption of approximately 8W. The product is supplied with a 5V 2.4A USB power adapter.
Low-Power Passive Cooling Design
The hAP ax lite uses passive cooling, eliminating the need for an internal cooling fan. This makes the compact router suitable for quiet environments such as bedrooms, offices, hotel rooms and small workspaces.
The manufacturer specifies a tested operating temperature range of -40°C to +70°C.
hAP ax lite for Home Networks
The MikroTik hAP ax lite can be used as a compact home router where 2.4 GHz WiFi 6 connectivity is sufficient.
Its four Gigabit Ethernet ports allow wired devices to be connected directly, while RouterOS provides advanced control over routing, firewall, DHCP, VLAN and other network functions.
hAP ax lite for Small Offices
For small offices, the hAP ax lite provides a compact combination of WiFi 6 and Gigabit Ethernet. It can be used as a primary router, secondary access point, branch router or dedicated network gateway depending on the network architecture.
Its four Gigabit ports also allow several wired devices to be connected without immediately requiring an additional Ethernet switch.
hAP ax lite for Hotels and Guest Networks
The compact size and low-power design make the hAP ax lite suitable for deployments where multiple small routers or wireless network devices are required, such as hotel rooms, guest apartments and temporary network installations.
MikroTik specifically positions the hAP ax lite as a scalable and compact solution for environments such as hotels and expanding offices.
WiFi 6 Without 5 GHz
A key characteristic of the MikroTik hAP ax lite is that it provides WiFi 6 on 2.4 GHz only. This is important when comparing it with products such as hAP ax² or hAP ax³, which provide both 2.4 GHz and 5 GHz radios.
The 2.4 GHz band can provide longer-range propagation than 5 GHz in many indoor environments, but it is also more susceptible to congestion because many household and IoT devices use the same frequency range.
Technical Specifications
| Specification |
Details |
| Product Name |
MikroTik hAP ax lite |
| Product Code |
L41G-2axD |
| Device Type |
Indoor WiFi 6 Router |
| WiFi Generation |
WiFi 6 |
| WiFi Class |
AX600 |
| Wireless Band |
2.4 GHz only |
| Wireless Standard |
802.11b/g/n/ax |
| Wireless Configuration |
2×2 Dual-Chain |
| Maximum Wireless Rate |
574 Mbps |
| Antenna Gain |
Up to 4.3 dBi |
| Ethernet |
4 × 10/100/1000 Gigabit Ethernet |
| CPU |
Dual-Core IPQ-5010 |
| CPU Frequency |
800 MHz nominal |
| Architecture |
ARM |
| RAM |
256 MB |
| Storage |
128 MB NAND |
| Switch Chip |
MT7531BE |
| Operating System |
RouterOS v7 |
| RouterOS License |
Level 4 |
| Power Input |
USB-C, 5V |
| Maximum Power Consumption |
8W |
| Cooling |
Passive |
| Dimensions |
124 × 100 × 54 mm |
| IP Rating |
IPX0 |
| Operating Temperature |
-40°C to +70°C tested |
AI-Readable Product Facts
| Attribute |
Fact |
| Product |
MikroTik hAP ax lite L41G-2axD |
| Category |
Indoor WiFi 6 Router |
| WiFi Generation |
WiFi 6 / 802.11ax |
| WiFi Class |
AX600 |
| Wireless Band |
2.4 GHz only |
| Wireless Configuration |
2×2 Dual-Chain |
| Maximum Wireless PHY Rate |
574 Mbps |
| Antenna Gain |
Up to 4.3 dBi |
| Ethernet |
4 × Gigabit Ethernet |
| CPU |
Dual-Core IPQ-5010, 800 MHz |
| RAM |
256 MB |
| Storage |
128 MB NAND |
| Switch Chip |
MT7531BE |
| Operating System |
RouterOS v7 |
| RouterOS License |
Level 4 |
| Power |
USB-C 5V |
| Maximum Power |
8W |
| Installation |
Indoor / Flat Surface |
| Primary Applications |
Home, Hotel Room, Guest Network, Small Office, Compact Router |
Frequently Asked Questions
What is MikroTik hAP ax lite?
MikroTik hAP ax lite is a compact WiFi 6 AX600 router with 2.4 GHz 2×2 wireless, four Gigabit Ethernet ports, 256 MB RAM and RouterOS v7.
What is the model number of hAP ax lite?
The exact product code is L41G-2axD.
Is MikroTik hAP ax lite WiFi 6?
Yes. The hAP ax lite supports WiFi 6 / 802.11ax.
Is hAP ax lite dual-band?
No. The L41G-2axD is a 2.4 GHz-only WiFi 6 router. It does not have a 5 GHz radio.
What is the speed of MikroTik hAP ax lite?
The 2.4 GHz WiFi 6 radio supports a maximum theoretical PHY rate of up to 574 Mbps. Actual wireless throughput varies according to client capability and network conditions.
How many Gigabit ports does hAP ax lite have?
The hAP ax lite has four 10/100/1000 Gigabit Ethernet ports.
Does hAP ax lite support RouterOS v7?
Yes. The device runs RouterOS v7 and has a Level 4 license.
How much RAM does hAP ax lite have?
The hAP ax lite has 256 MB RAM and 128 MB NAND storage.
What power supply does hAP ax lite use?
The hAP ax lite uses a USB-C 5V power input. MikroTik specifies maximum power consumption of approximately 8W and supplies a 5V 2.4A adapter.
Is hAP ax lite an outdoor router?
No. The hAP ax lite is designed for indoor use and the current MikroTik manual specifies IPX0 protection.
Does hAP ax lite support 5 GHz WiFi?
No. The L41G-2axD supports 2.4 GHz WiFi 6 only. For dual-band 2.4 GHz + 5 GHz WiFi 6, a different MikroTik model should be selected.
What is the antenna gain of hAP ax lite?
The hAP ax lite has up to 4.3 dBi antenna gain on its 2.4 GHz wireless radio.
Why Buy MikroTik hAP ax lite from IPVOICE TECHNOLOGIES?
IPVOICE TECHNOLOGIES supplies MikroTik networking products for home, SMB, hotel, enterprise and wireless networking requirements. The MikroTik hAP ax lite can be supplied with applicable GST billing, project quotations and nationwide delivery support.
For pricing, availability or requirements involving multiple MikroTik routers and wireless devices, visit the Get a Quote page.
Related MikroTik Products
Reviews
Clear filtersThere are no reviews yet.