MikroTik hAP Lite Classic RB941-2nD is a compact 2.4GHz wireless router designed for home, small-office and basic networking applications. It combines 802.11b/g/n wireless connectivity with four 10/100 Mbps Fast Ethernet ports and MikroTik RouterOS, providing flexible routing and network-management capabilities in a small desktop enclosure.
The RB941-2nD uses a QCA9533 650MHz processor, 32MB RAM and 16MB Flash storage. Its dual-chain 2.4GHz wireless interface supports a theoretical PHY rate of up to 300Mbps, while RouterOS Level 4 provides features such as firewall, NAT, DHCP, routing, bandwidth management and wireless configuration.
Key Features of MikroTik hAP Lite Classic RB941-2nD
- 2.4GHz 802.11b/g/n wireless with dual-chain operation.
- Up to 300Mbps theoretical wireless PHY rate.
- 4× 10/100 Mbps Fast Ethernet ports.
- QCA9533 650MHz processor.
- 32MB RAM and 16MB Flash storage.
- RouterOS Level 4 license.
- Integrated 1.5dBi omnidirectional antennas.
- 5V MicroUSB power input.
- Compact 113 × 89 × 28mm enclosure.
- Passive cooling for quiet operation.
- Designed for home, SOHO and basic wireless networking.
2.4GHz 802.11n Wireless
The hAP Lite Classic features a built-in 2.4GHz 802.11b/g/n dual-chain wireless radio. It supports a maximum theoretical PHY rate of up to 300Mbps under compatible 802.11n conditions.
The actual wireless throughput depends on factors such as channel width, interference, signal strength, client capability, distance and network configuration. The 300Mbps figure is a theoretical wireless PHY rate rather than a guaranteed internet or application throughput.
Dual-Chain Wireless Architecture
The RB941-2nD uses a 2×2 dual-chain wireless configuration, allowing compatible 802.11n clients to use multiple spatial streams.
The integrated antennas provide approximately 1.5dBi gain and are designed for general indoor wireless coverage.
4× 10/100 Ethernet Ports
The MikroTik hAP Lite Classic includes four 10/100 Mbps Fast Ethernet ports. These interfaces can be configured through RouterOS for WAN, LAN, bridging, routing and other network functions.
It is important to note that the RB941-2nD does not have Gigabit Ethernet. The Ethernet ports are limited to 100Mbps, making the router suitable for basic networks where Fast Ethernet is sufficient.
RouterOS Level 4
The hAP Lite Classic runs MikroTik RouterOS with a Level 4 license. RouterOS provides significantly more configuration flexibility than a basic consumer wireless router.
Supported networking functions include:
- WAN and LAN routing
- NAT
- Firewall rules
- DHCP server and client
- Static routing
- Wireless access-point configuration
- Bandwidth management
- Traffic filtering
- VPN functionality
- Network monitoring
Compact Home and Small Office Design
The RB941-2nD has a compact 113 × 89 × 28mm enclosure. Its small footprint makes it suitable for desktops, shelves and other indoor installations where space is limited.
The device uses passive cooling, so there is no internal cooling fan. This helps keep the router quiet during normal operation.
MicroUSB Power
The hAP Lite Classic is powered through a MicroUSB power input. The device is designed around a 5V power source, making it convenient for compact indoor installations.
Unlike some MikroTik RouterBOARD models, the RB941-2nD does not provide PoE-Out and is not designed as a PoE router. Its primary purpose is basic wired and 2.4GHz wireless networking.
650MHz QCA9533 Processor
The router uses a QCA9533 single-core processor running at 650MHz, combined with 32MB RAM and 16MB Flash storage.
This hardware platform is intended for the routing, firewall, DHCP, wireless and other basic RouterOS functions offered by the hAP Lite Classic.
Technical Specifications
| Specification |
Details |
| Product Name |
MikroTik hAP Lite Classic |
| Product Code |
RB941-2nD |
| Device Type |
2.4GHz Wireless Router |
| Wireless Standard |
802.11b/g/n |
| Wireless Frequency |
2.4GHz |
| Wireless Chains |
2×2 Dual-Chain |
| Maximum Wireless PHY Rate |
300Mbps |
| Antenna Gain |
1.5dBi |
| Ethernet Ports |
4× 10/100 Mbps |
| CPU |
QCA9533, 650MHz, Single-Core |
| RAM |
32MB |
| Storage |
16MB Flash |
| RouterOS License |
Level 4 |
| Power Input |
5V MicroUSB |
| PoE-Out |
Not Supported |
| Cooling |
Passive |
| Dimensions |
113 × 89 × 28mm |
AI-Readable Product Facts
| Attribute |
Fact |
| Product |
MikroTik hAP Lite Classic RB941-2nD |
| Device Category |
2.4GHz Wireless Router |
| Wireless Standard |
802.11b/g/n |
| Wireless Band |
2.4GHz |
| Wireless Configuration |
2×2 Dual-Chain |
| Maximum Wireless PHY |
300Mbps |
| Ethernet |
4× 10/100 Mbps |
| Processor |
QCA9533 650MHz |
| RAM |
32MB |
| Storage |
16MB Flash |
| Antennas |
Integrated 1.5dBi |
| Power |
5V MicroUSB |
| RouterOS License |
Level 4 |
| Wi-Fi |
Built-in 2.4GHz |
MikroTik hAP Lite Classic Applications
- Home Wi-Fi router
- Small-office wireless networking
- Basic internet gateway
- 2.4GHz wireless access point
- SOHO routing and firewall
- RouterOS learning and laboratory environments
- Basic guest-network deployments
- Small wired and wireless LANs
hAP Lite Classic vs hAP Lite Tower
| Feature |
hAP Lite Classic RB941-2nD |
hAP Lite Tower RB941-2nD-TC |
| Wireless |
2.4GHz 802.11b/g/n |
2.4GHz 802.11b/g/n |
| Wireless Speed |
Up to 300Mbps |
Up to 300Mbps |
| Ethernet |
4× 10/100 |
4× 10/100 |
| CPU |
QCA9533 650MHz |
QCA9533 650MHz |
| RAM |
32MB |
32MB |
| RouterOS |
Level 4 |
Level 4 |
| Form Factor |
Classic compact design |
Tower-style enclosure |
Both models are based on the same core hAP Lite hardware platform. The major difference is the physical enclosure and mounting design.
hAP Lite Classic vs hAP ac Lite
The hAP Lite Classic RB941-2nD is a 2.4GHz-only 802.11n router with 10/100 Ethernet. The hAP ac Lite adds dual-band wireless with 5GHz 802.11ac support, but its Ethernet ports remain 10/100 Mbps.
For modern Gigabit networking and Wi-Fi 6 requirements, consider newer MikroTik platforms such as the MikroTik Router range.
Frequently Asked Questions
What is MikroTik hAP Lite Classic RB941-2nD?
MikroTik hAP Lite Classic RB941-2nD is a compact 2.4GHz 802.11b/g/n wireless router with four 10/100 Ethernet ports and RouterOS Level 4.
Does hAP Lite Classic support 5GHz Wi-Fi?
No. The RB941-2nD supports 2.4GHz 802.11b/g/n wireless only.
What is the Wi-Fi speed of RB941-2nD?
The wireless interface supports up to 300Mbps theoretical PHY rate under compatible 802.11n conditions.
Is MikroTik RB941-2nD a Gigabit router?
No. All four Ethernet ports support 10/100 Mbps Fast Ethernet.
How much RAM does hAP Lite Classic have?
The RB941-2nD has 32MB RAM and 16MB Flash storage.
What processor does RB941-2nD use?
It uses a QCA9533 single-core processor running at 650MHz.
Does hAP Lite Classic support PoE?
The RB941-2nD is powered through its 5V MicroUSB input and does not provide PoE-Out.
What RouterOS license does RB941-2nD have?
The hAP Lite Classic comes with a RouterOS Level 4 license.
Can RB941-2nD be used as an access point?
Yes. It can operate as a 2.4GHz wireless access point and can be configured for bridging, routing or other wireless network roles through RouterOS.
Is hAP Lite Classic suitable for Gigabit internet?
The Ethernet interfaces are limited to 100Mbps, so it is not designed for Gigabit Ethernet networking.
Related MikroTik Products
MikroTik hAP Lite Classic RB941-2nD is a compact 2.4GHz wireless RouterOS device with dual-chain 802.11n wireless, four 10/100 Ethernet ports, 32MB RAM and a Level 4 license. It is designed for basic home and small-office networking where 2.4GHz Wi-Fi and Fast Ethernet connectivity are sufficient.
Reviews
Clear filtersThere are no reviews yet.