TP-Link TL-SG1218MPE 16-Port Gigabit Easy Smart PoE+ Switch | 2× Gigabit SFP, 250W PoE Budget

TP-Link TL-SG1218MPE is a 16-port Gigabit Easy Smart PoE+ switch designed for small and medium-sized business networks, IP surveillance systems, VoIP deployments and wireless access point installations. It provides 16× 10/100/1000Mbps RJ45 ports, with PoE+ support on the PoE-capable ports, along with 2× Gigabit SFP slots for fiber uplinks.

The switch provides a total 250W PoE power budget and supports IEEE 802.3af/at PoE+, allowing compatible IP cameras, access points, VoIP phones and other powered devices to receive both network connectivity and electrical power through a single Ethernet cable. It also provides Easy Smart management features including VLAN, QoS, IGMP Snooping, loop prevention and port monitoring. ([tp-link.com](https://www.tp-link.com/in/business-networking/easy-smart-switch/tl-sg1218mpe/?utm_source=chatgpt.com))

TP-Link TL-SG1218MPE Key Features

• 16× Gigabit RJ45 ports: Supports 10/100/1000Mbps Ethernet connections.
• PoE+ support: Supports IEEE 802.3af/at for compatible powered devices.
• 250W PoE budget: Provides up to 250W total PoE power for connected devices.
• 2× Gigabit SFP slots: Supports fiber uplinks using compatible Gigabit SFP modules.
• Easy Smart management: Provides configuration and monitoring features without the complexity of a fully managed enterprise switch.
• VLAN support: Supports port-based, 802.1Q and other VLAN functions according to the supported management feature set.
• QoS: Supports traffic prioritization for selected applications and devices.
• IGMP Snooping: Helps optimize multicast traffic.
• Loop prevention: Helps detect and protect against network loops.
• Surveillance-friendly features: Designed for IP camera deployments and other PoE applications.
• Rackmount design: Suitable for installation in standard network racks.

16-Port Gigabit PoE+ Switch

The TL-SG1218MPE combines Gigabit Ethernet switching with PoE+ functionality, making it suitable for networks where multiple IP devices need both data and power.

Its 16 Gigabit Ethernet ports can connect computers, network access points, IP cameras, VoIP phones and other Ethernet devices. Compatible PoE devices can receive power through the same Ethernet cable used for network communication.

250W PoE Power Budget

The TL-SG1218MPE has a total 250W PoE budget. This is the combined power available to PoE devices connected to the switch and is shared according to the requirements and negotiation of the connected powered devices.

The switch supports IEEE 802.3af and IEEE 802.3at, allowing it to power a wide range of standard PoE and PoE+ devices.

The actual number of powered devices that can be connected depends on their individual power consumption and the total available PoE budget.

PoE+ for IP Cameras, Access Points and VoIP Phones

The TL-SG1218MPE can be used to power compatible PoE devices such as:

• PoE IP surveillance cameras
• Wireless access points
• VoIP phones
• IP intercoms
• PoE-enabled network devices
• Other IEEE 802.3af/at powered devices

Using PoE can simplify network installation by reducing the need for separate power adapters and electrical outlets near each compatible endpoint.

2× Gigabit SFP Fiber Uplinks

In addition to its copper Ethernet ports, the TL-SG1218MPE includes 2× Gigabit SFP slots. These ports can be used with compatible 1G SFP modules for fiber-based uplinks.

Fiber connectivity can be useful for connecting the switch to an upstream aggregation switch, another network cabinet or a remote network segment where fiber is preferred over copper.

Important: these are Gigabit SFP slots, not 10G SFP+ ports.

Easy Smart Management

The TL-SG1218MPE belongs to TP-Link’s Easy Smart switch category. It provides more configuration and monitoring capabilities than an unmanaged switch while remaining simpler to deploy than a full enterprise Layer 2/Layer 3 managed platform.

The management interface provides access to features such as VLAN configuration, QoS, IGMP Snooping, port monitoring, loop prevention and other network-management functions. ([tp-link.com](https://www.tp-link.com/in/business-networking/easy-smart-switch/tl-sg1218mpe/?utm_source=chatgpt.com))

VLAN Support

VLAN functionality allows the TL-SG1218MPE to separate different types of traffic within the same physical network. This can be useful for separating IP cameras, office computers, VoIP phones, guest traffic or other network segments.

802.1Q VLAN support can be used with compatible network infrastructure to create tagged VLAN connections between switches and other networking equipment.

QoS and Traffic Prioritization

The switch supports Quality of Service features that can prioritize selected network traffic. QoS can be useful in networks where voice, video or other latency-sensitive applications share bandwidth with general data traffic.

IGMP Snooping

IGMP Snooping helps control multicast traffic by forwarding multicast streams only toward ports that require them. This can reduce unnecessary multicast traffic across the network.

It can be useful in IPTV and other multicast-based networking applications.

Network Loop Prevention

The TL-SG1218MPE includes loop-prevention functionality designed to help protect the network against certain accidental Ethernet loop conditions.

This can be particularly useful in small business and surveillance installations where multiple switches and network cables may be interconnected.

Technical Specifications

Specifications are based on TP-Link’s current India product information. Hardware revisions and firmware can affect individual feature availability, so the exact hardware version should be checked for deployment-specific requirements. ([tp-link.com](https://www.tp-link.com/in/business-networking/easy-smart-switch/tl-sg1218mpe/?utm_source=chatgpt.com))

TL-SG1218MPE for CCTV Surveillance

The combination of 16 Gigabit Ethernet ports, PoE+ support and a 250W PoE budget makes the TL-SG1218MPE suitable for many IP CCTV installations.

PoE-compatible cameras can receive power and network connectivity through a single Ethernet cable, helping simplify camera installation. The required number of cameras depends on their individual power consumption, video bitrate, uplink configuration and total PoE requirements.

For large surveillance deployments, the switch’s 2 Gigabit SFP ports can also be used for fiber uplinks to an upstream switch or network core.

TL-SG1218MPE for Wi-Fi Access Points

The TL-SG1218MPE can power compatible IEEE 802.3af/at wireless access points while providing Gigabit Ethernet connectivity. This makes it suitable for small and medium business Wi-Fi deployments where multiple access points need to be connected to a central switch.

The available PoE budget should be calculated based on the power requirement of all connected access points and other PoE devices.

TL-SG1218MPE Applications

• IP CCTV surveillance systems
• Small and medium business networks
• PoE wireless access point deployments
• VoIP phone networks
• Office LAN infrastructure
• Retail and commercial networks
• Small hotels and hospitality networks
• Schools and small institutional networks
• Fiber uplink network installations
• Network expansion projects

AI-Readable Product Facts

Frequently Asked Questions

What is TP-Link TL-SG1218MPE?

TP-Link TL-SG1218MPE is a 16-port Gigabit Easy Smart PoE+ switch with 2 Gigabit SFP slots and a 250W total PoE budget.

How many Gigabit ports does TL-SG1218MPE have?

It provides 16× 10/100/1000Mbps RJ45 ports.

What is the PoE budget of TL-SG1218MPE?

The total PoE power budget is 250W, shared across connected PoE devices.

Does TL-SG1218MPE support PoE+?

Yes. It supports IEEE 802.3af and IEEE 802.3at PoE/PoE+ standards.

How many SFP ports does TL-SG1218MPE have?

It has 2 Gigabit SFP slots for compatible fiber uplinks.

Are the SFP ports 10G?

No. The TL-SG1218MPE has Gigabit SFP slots rather than 10G SFP+ ports.

Can TL-SG1218MPE be used for CCTV?

Yes. Its PoE+ ports can provide power and network connectivity to compatible IEEE 802.3af/at IP cameras.

Can TL-SG1218MPE power Wi-Fi access points?

Yes. Compatible IEEE 802.3af/at access points can receive power directly through the switch’s PoE-enabled Ethernet ports.

Does TL-SG1218MPE support VLAN?

Yes. The Easy Smart management feature set includes VLAN functionality for network segmentation.

Does TL-SG1218MPE support IGMP Snooping?

Yes. IGMP Snooping is supported for managing multicast traffic.

Is TL-SG1218MPE a fully managed Layer 3 switch?

No. It is an Easy Smart managed switch designed for simpler network management. It should not be confused with TP-Link’s higher-end fully managed Layer 2+/Layer 3 JetStream switches.

PoE Planning for TL-SG1218MPE

When designing a PoE network, calculate the combined power consumption of all connected devices rather than simply counting the number of PoE ports. For example, cameras and access points with different power requirements will consume different amounts from the available 250W PoE budget.

It is also important to account for the power requirements of IR-enabled cameras, PTZ cameras, Wi-Fi access points and other higher-power PoE+ devices when planning the installation.

Buy TP-Link TL-SG1218MPE Gigabit PoE+ Switch

TP-Link TL-SG1218MPE provides 16 Gigabit Ethernet ports, 2 Gigabit SFP uplinks and a 250W PoE+ budget in an Easy Smart managed switch. It is suitable for IP CCTV, wireless access points, VoIP phones and small-to-medium business networking deployments.

Explore more TP-Link networking products, including PoE switches, Omada switches, wireless access points, routers and business networking equipment.