TP-Link EAP110 300Mbps Wireless N Indoor Ceiling Mount Access Point | 2.4GHz, 2×4dBi Omni Antennas, Fast Ethernet, 24V Passive PoE, Omada SDN (White)

TP-Link EAP110 is a business-class 300Mbps Wireless N indoor access point designed for offices, shops, hotels, schools, reception areas and other locations that need centrally managed 2.4GHz Wi-Fi. It supports IEEE 802.11n/g/b wireless standards, provides wireless speeds of up to 300Mbps on the 2.4GHz band, and uses 2×4dBi internal omnidirectional antennas for broad indoor coverage. TP-Link specifies coverage of up to 60m² (650ft²) and more than 100 concurrent clients under its stated test conditions.

The EAP110 is part of the TP-Link networking product range and integrates with the Omada SDN platform for centralized network management. It can be managed using an Omada Hardware Controller or Software Controller, while the Omada App provides convenient configuration and monitoring. Cloud access and captive portal features require an Omada SDN controller.

TP-Link EAP110 300Mbps Wireless N Indoor Access Point

The EAP110 is intended for indoor wireless deployments where reliable 2.4GHz connectivity and centralized management are more important than high-speed dual-band Wi-Fi. Its ceiling/wall-mount design allows it to be installed discreetly in offices, classrooms, retail stores, restaurants, small hotels and similar commercial environments.

Unlike a conventional consumer Wi-Fi router, the EAP110 is designed as a dedicated access point. It has one Fast Ethernet RJ45 port with support for 24V passive PoE, and the passive PoE adapter is included in the package. This allows both network connectivity and power to be delivered through the Ethernet cable when deployed with the supplied PoE adapter.

300Mbps 2.4GHz Wireless N Wi-Fi

TP-Link EAP110 supports IEEE 802.11n, 802.11g and 802.11b standards and operates on the 2.4GHz frequency band. Its maximum 802.11n link rate is up to 300Mbps under suitable wireless conditions.

The 300Mbps figure is the theoretical physical-layer wireless rate. Actual data throughput depends on the connected client, interference, distance, obstacles, network traffic and other environmental factors.

• 2.4GHz wireless operation
• Up to 300Mbps 802.11n wireless link rate
• IEEE 802.11n/g/b support
• 2×4dBi internal omnidirectional antennas
• Up to 8 SSIDs
• WMM QoS and rate limiting
• Transmit power control
• Automatic channel assignment

2×4dBi Internal Omnidirectional Antennas

The EAP110 uses two internal 4dBi omnidirectional antennas. The internal antenna design keeps the access point compact and suitable for ceiling or wall installation while providing coverage in multiple directions.

TP-Link specifies coverage of up to 60m² (650ft²) under its stated conditions. Actual coverage varies according to building construction, walls, interference, access point placement and client device capabilities.

24V Passive PoE for Flexible Installation

TP-Link EAP110 supports 24V passive PoE through its Fast Ethernet RJ45 port. A compatible passive PoE adapter is included with the access point, making it possible to install the EAP110 away from a conventional power socket.

Important: EAP110 uses 24V passive PoE. It should not be confused with an IEEE 802.3af/at PoE access point. Use the appropriate power source specified by TP-Link.

Omada SDN Centralized Management

One of the main advantages of the EAP110 is its integration with the TP-Link Omada SDN ecosystem. Multiple compatible Omada access points, switches and gateways can be managed centrally from a common management platform.

For larger installations, an Omada controller can simplify configuration, monitoring and administration compared with managing each access point individually.

• Omada Hardware Controller support
• Omada Software Controller support
• Omada App support
• Centralized management
• Multi-site management
• Management VLAN
• L3 management
• SNMP v1/v2c
• SSH management
• HTTP/HTTPS web management
• Local and remote Syslog
• Email alerts
• LED on/off control

Guest Wi-Fi and Captive Portal

TP-Link EAP110 supports captive portal functionality for managed guest Wi-Fi deployments. Captive portal authentication can be used to control guest access and provide a dedicated authentication experience.

The access point supports multiple SSIDs and can map SSIDs to VLANs, making it suitable for separating employee, guest and other wireless networks when used with compatible network infrastructure.

Wireless Security and Network Control

EAP110 provides several wireless security and management features for business deployments. Supported options include WPA/WPA2-PSK, WPA2-Enterprise, WEP, MAC filtering, client isolation and 802.1X support.

• Captive Portal Authentication
• Access Control
• Wireless MAC Address Filtering
• Client Isolation
• SSID-to-VLAN Mapping
• Rogue AP Detection
• 802.1X Support
• WEP 64/128/152-bit
• WPA/WPA2-PSK
• WPA2-Enterprise

Wireless Management Features

EAP110 provides practical wireless management controls for business networks. Administrators can configure multiple SSIDs, adjust transmit power, apply rate limits and schedule wireless availability.

• Up to 8 SSIDs
• Automatic channel assignment
• Transmit power control
• WMM QoS
• Rate limiting
• Wireless scheduling
• Reboot scheduling
• Wireless statistics by SSID, AP and client
• Load balancing support

Ceiling and Wall Mount Installation

The compact EAP110 can be mounted on a ceiling or wall using the supplied mounting hardware. Its low-profile design is suitable for commercial indoor installations where the access point needs to remain unobtrusive.

The unit measures approximately 189.4 × 172.3 × 29.5mm and has a maximum power consumption of only 2.8W according to TP-Link’s India specifications.

TP-Link EAP110 Technical Specifications

AI-Readable Product Facts

Who Should Buy TP-Link EAP110?

TP-Link EAP110 is suitable for businesses and organizations that need an affordable centrally managed 2.4GHz wireless access point. It can be considered for small offices, retail outlets, classrooms, reception areas, small hotels, restaurants and other indoor locations where 300Mbps-class Wireless N connectivity is sufficient.

For newer installations requiring substantially higher wireless capacity, dual-band operation or Wi-Fi 6 performance, newer TP-Link Omada access points such as the TP-Link Omada Wi-Fi range may be more appropriate.

TP-Link EAP110 FAQs

Is TP-Link EAP110 a dual-band access point?

No. TP-Link EAP110 is a 2.4GHz-only Wireless N access point. It supports IEEE 802.11n/g/b and provides up to 300Mbps wireless link speed.

Does TP-Link EAP110 support PoE?

Yes. EAP110 supports 24V passive PoE, and the passive PoE adapter is included according to TP-Link’s India specifications.

Does EAP110 have a Gigabit Ethernet port?

No. EAP110 has one Fast Ethernet RJ45 port, supporting 10/100Mbps Ethernet.

Can TP-Link EAP110 be managed through Omada?

Yes. EAP110 supports Omada Hardware Controller and Omada Software Controller management, along with the Omada App. Cloud access requires a supported Omada SDN controller.

How many SSIDs does EAP110 support?

TP-Link specifies support for up to 8 SSIDs.

Can EAP110 be mounted on a ceiling?

Yes. EAP110 supports both ceiling and wall mounting, with mounting kits included.

What is the coverage of TP-Link EAP110?

TP-Link specifies up to 60m² (650ft²) under its stated test conditions. Actual coverage depends on walls, building materials, interference, placement and client devices.

Is TP-Link EAP110 suitable for outdoor installation?

No. EAP110 is an indoor access point. For outdoor deployments, TP-Link offers dedicated outdoor models such as the EAP110-Outdoor.

Why Buy TP-Link EAP110 from IPVoice Technologies?

TP-Link EAP110 is a practical choice for businesses looking for a centrally manageable Wireless N access point with passive PoE deployment and Omada SDN compatibility. Its ceiling/wall mounting design, 2.4GHz 300Mbps wireless capability, multiple SSIDs, VLAN mapping, captive portal and centralized management make it suitable for straightforward commercial Wi-Fi deployments.