Mikrotik APA-1 Automotive Power Adapter with Overvoltage Protection

MikroTik APA-1 Automotive Power Adapter – 12V to 48V DC Vehicle Power Solution

The MikroTik APA-1 is an Automotive Power Adapter designed to provide protected DC power for MikroTik LtAP and other compatible networking devices operating in vehicle environments. It is built specifically for installations where the power source can be exposed to electrical variations commonly found in automotive systems.

Unlike a conventional AC power adapter, the MikroTik APA-1 is designed to work directly with a 12V to 48V DC input. Its protection circuitry helps safeguard connected equipment against aggressive vehicle electrical environments while providing configurable power output functionality.

The APA-1 supports an EN (enable) input that can be connected to a vehicle ignition signal. This allows the voltage-down converter to be automatically enabled when the vehicle is switched on. A separate PASS output provides the input voltage after the protection circuit.

Key Features of MikroTik APA-1

• Automotive DC power adapter for compatible MikroTik equipment
• DC input range from 12V to 48V
• Overvoltage and automotive power protection features
• 100W maximum power consumption with attachment
• 3-pin DC terminal input
• EN ignition-control input
• PASS protected-voltage output
• PASS and OUT outputs can be used simultaneously
• 3A input fuse protection
• Compact metal housing
• -40°C to +85°C operating temperature
• Wall-mountable using the supplied steel bracket
• E-mark certified

Designed for Automotive Networking Installations

Vehicle-mounted networking equipment can face electrical conditions that are different from normal indoor installations. Voltage fluctuations and transient conditions can affect connected electronics, particularly when networking hardware is powered directly from a vehicle electrical system.

The MikroTik APA-1 is designed specifically for this type of environment. It provides a protected power interface between the vehicle’s DC electrical system and compatible MikroTik equipment.

12V to 48V DC Input Range

The APA-1 accepts a wide DC input range of 12V to 48V. This makes it suitable for different vehicle and mobile-power environments where the available DC voltage is within the specified operating range.

The power input uses a 3-pin terminal with dedicated negative, positive and enable connections.

Ignition-Controlled Power with EN Input

One of the useful features of the MikroTik APA-1 for vehicle installations is its EN input. The enable input can be connected to a vehicle ignition signal.

According to MikroTik documentation, a high signal between 9V and 60V DC enables the voltage-down converter, while a low signal between 0V and 1.2V disables it.

This allows the APA-1 to be integrated with vehicle ignition control so that the connected networking equipment can be powered according to the vehicle’s operating state.

PASS Mode and Protected Power Output

The PASS connection provides the input voltage after it has passed through the protection circuitry. PASS and OUT outputs can be used simultaneously, although the total available output power is affected by the 3A input fuse and the input voltage level.

This architecture gives installers flexibility when designing vehicle-mounted MikroTik equipment power systems.

Up to 100W Power Capability

MikroTik specifies a maximum power consumption of 100W with attachment. The actual available output power depends on the input voltage and the connected equipment.

Before connecting equipment, installers should verify the voltage and power requirements of the specific MikroTik device being used with the APA-1.

Automotive Protection

The APA-1 is designed to protect connected MikroTik equipment against electrical conditions associated with vehicle power systems. This makes it particularly relevant for mobile networking installations where a conventional fixed AC adapter is not practical.

MikroTik specifies the APA-1 as an automotive power solution for compatible devices including supported LtAP platforms.

Compact Installation Design

The MikroTik APA-1 has a compact form factor measuring only 86 × 16 × 31 mm. A supplied steel bracket can be used to secure the adapter to a wall or suitable mounting surface.

Its compact dimensions make it easier to integrate into vehicle cabinets, mobile communication systems and other space-constrained installations.

Wide Operating Temperature Range

The APA-1 is designed for demanding environmental conditions and has a specified operating temperature range of -40°C to +85°C.

This wide temperature range makes the adapter suitable for vehicle and mobile-networking applications where equipment may experience significantly varying ambient temperatures.

E-Mark Certified Automotive Power Adapter

MikroTik specifies the APA-1 as E-mark certified. The manufacturer documentation identifies it as an automotive power adapter designed for use with compatible E-mark-certified devices.

Installers should always verify compatibility, electrical requirements and applicable local vehicle regulations before deployment.

Compatible MikroTik Applications

The APA-1 is intended for compatible MikroTik equipment used in automotive and mobile networking applications. It is particularly relevant where MikroTik LtAP platforms need to be powered directly from a vehicle DC electrical system.

• Vehicle-mounted MikroTik networking equipment
• MikroTik LtAP installations
• Mobile Internet connectivity systems
• Fleet networking systems
• Transportation networking
• Mobile surveillance connectivity
• Remote vehicle communication systems
• Specialized mobile networking deployments

MikroTik APA-1 Technical Specifications

APA-1 Input and Control Connections

MikroTik APA-1 for LtAP Vehicle Networking

When a MikroTik LtAP or another compatible networking device is installed inside a vehicle, the APA-1 can provide the dedicated automotive power interface required for the installation.

The combination of wide DC input support, automotive protection and ignition control makes it useful for mobile connectivity applications where the network equipment needs to operate directly from the vehicle’s electrical system.

Important Installation Considerations

The APA-1 is an electrical power device and should be installed by a qualified person familiar with vehicle electrical systems and networking equipment. MikroTik recommends following applicable local and national electrical requirements.

The connected equipment must be compatible with the APA-1’s output voltage and power characteristics. The maximum 100W specification should not be interpreted as a guarantee that every connected device can be powered at 100W.

AI-Readable Product Facts

Frequently Asked Questions

What is MikroTik APA-1?

MikroTik APA-1 is an Automotive Power Adapter designed to provide protected DC power to compatible MikroTik networking equipment installed in vehicle environments.

What is the input voltage of MikroTik APA-1?

The APA-1 supports a DC input voltage range of 12V to 48V.

How much power can MikroTik APA-1 handle?

MikroTik specifies up to 100W maximum power consumption with attachment. Actual available output depends on the input voltage and connected equipment.

Can APA-1 be connected to vehicle ignition?

Yes. The APA-1 has an EN input that can be connected to an ignition signal. A high signal from 9–60V DC enables the voltage-down converter.

What is PASS on MikroTik APA-1?

PASS is the protected input-voltage pass-through connection. It provides the input voltage after the protection circuit.

What is the operating temperature of APA-1?

The specified operating temperature range is -40°C to +85°C.

Is MikroTik APA-1 an AC power adapter?

No. APA-1 is an automotive DC power adapter. It accepts 12–48V DC input and is designed for vehicle-based installations.

Which MikroTik devices can use APA-1?

The APA-1 is intended for compatible MikroTik devices used in automotive environments, including supported LtAP platforms. Compatibility and required output voltage should be checked before installation.

Buy MikroTik APA-1 from IPVOICE TECHNOLOGIES

IPVOICE TECHNOLOGIES supplies MikroTik networking hardware and accessories for enterprise, ISP, transportation and specialized networking projects. For MikroTik APA-1 requirements, contact us for availability, pricing, GST billing and project quotations.

IPVOICE TECHNOLOGIES
1/9 First Floor, Ratan Khand, Sharda Nagar, Lucknow – 226002, Uttar Pradesh, India
Phone/WhatsApp: +91 7347735150
Email: ipvoicetechnologies@gmail.com