MikroTik LtAP LR8 LTE6 Kit LtAP-2HnD&FG621-EA&LR8 LTE Cat6 Router | LoRaWAN, GPS, 2.4GHz WiFi, 3× MiniSIM, Gigabit PoE

MikroTik LtAP LR8 LTE6 kit is a rugged all-in-one LTE, WiFi, GPS and LoRaWAN gateway designed for outdoor, industrial, automotive and IoT deployments. It combines a faster LTE Cat6 modem, integrated 2.4GHz 802.11b/g/n wireless, GPS support and an R11e-LR8 LoRa concentrator in a heavy-duty IP54 enclosure.

The model code is LtAP-2HnD&FG621-EA&LR8. Compared with the older LtAP LR8 LTE kit, this LTE6 version uses the newer FG621-EA Cat6 modem for higher cellular performance. MikroTik specifies theoretical LTE Cat6 speeds of up to 300 Mbps download and 50 Mbps upload. It also provides three MiniSIM slots, Gigabit Ethernet with passive PoE-In, USB 2.0, RS232 and multiple powering options including automotive power.

MikroTik LtAP LR8 LTE6 Kit Key Features

• LTE Cat6: Up to 300 Mbps theoretical download and 50 Mbps upload.
• Integrated LoRaWAN Gateway: R11e-LR8 concentrator for 863–870 MHz LoRa deployments.
• 2.4GHz WiFi: Dual-chain 802.11b/g/n wireless with up to 300 Mbps theoretical PHY rate.
• GPS: Built-in GNSS module with external SMA antenna connector.
• 3× MiniSIM: Three SIM slots for flexible cellular deployments and roaming configurations.
• Gigabit Ethernet: 1× 10/100/1000 Ethernet port with passive PoE-In.
• Multiple Power Options: DC, passive PoE and automotive power input.
• IP54 Enclosure: Rugged enclosure suitable for outdoor pole mounting and indoor installation.
• USB 2.0: USB Type-A connectivity for compatible peripherals.
• RS232: DB9 serial console interface.
• RouterOS v7: Advanced routing, firewall, VPN, VLAN and network management capabilities.

LTE Cat6 Mobile Connectivity

The major upgrade in the LtAP LR8 LTE6 kit is its FG621-EA LTE Cat6 modem. MikroTik specifies theoretical LTE speeds of up to 300 Mbps download and 50 Mbps upload, providing a faster cellular platform than the LTE Cat4 modem used in the earlier LtAP LR8 LTE kit.

The supported cellular bands include LTE FDD bands 1, 2, 3, 7, 8, 20 and 28, together with LTE TDD bands 38, 40 and 41. Actual cellular throughput depends on the mobile operator, signal strength, spectrum, network congestion and carrier configuration.

Integrated LoRaWAN Gateway

The LtAP LR8 LTE6 kit combines cellular connectivity with a dedicated R11e-LR8 LoRa concentrator. The LoRa module is designed for the 863–870 MHz frequency range and provides the gateway functionality required to connect compatible LoRaWAN sensors and end devices to an IP network.

This combination makes the LtAP LR8 LTE6 suitable for remote IoT installations where LoRa sensors need a cellular backhaul connection. Applications can include agriculture monitoring, environmental sensing, logistics, asset monitoring and smart infrastructure. MikroTik’s documentation identifies the R11e-LR8 module and The Things Network integration as supported components of the platform.

2.4GHz WiFi Access Point

The device includes a built-in dual-chain 2.4GHz 802.11b/g/n wireless access point. The wireless module supports AP, station, bridge and point-to-point modes. Built-in PIF antennas are provided, while MMCX connectors allow compatible external antenna configurations.

The maximum theoretical wireless PHY rate is 300 Mbps. Actual WiFi throughput depends on channel conditions, client capability, distance, interference and configuration.

GPS and GNSS Support

The LtAP LR8 LTE6 kit includes a built-in GPS module and an external SMA connector for a compatible active GPS antenna. MikroTik documentation lists support for GPS, GLONASS, BeiDou and Galileo.

This makes the device particularly useful for mobile and remote deployments where network connectivity and geographical positioning are required together, such as fleet, transportation and remote asset applications.

Three MiniSIM Slots

The LtAP LR8 LTE6 kit provides three MiniSIM slots. The multiple-SIM design can be useful for deployments requiring different mobile operators, roaming configurations or cellular fallback.

The SIM configuration is integrated with the device’s miniPCIe modem architecture. MikroTik documentation explains that SIM slots 2 and 3 can be used with a modem installed in the lower miniPCIe slot, while the LoRa card is associated with SIM slot 1.

Gigabit Ethernet with Passive PoE-In

The device includes one 10/100/1000 Gigabit Ethernet port. The Ethernet interface accepts 12–30V DC passive PoE, allowing the unit to receive both power and network connectivity through a suitable passive PoE arrangement.

The Ethernet port can also be used for conventional wired networking, local management and upstream network connectivity.

Multiple Powering Options

The MikroTik LtAP LR8 LTE6 kit is designed for flexible deployment and supports several powering methods. The supplied power adapter is 24V DC, 1.2A. The device also supports passive PoE and automotive power configurations.

• DC input: 12–30V DC
• Passive PoE-In: 12–30V DC
• Automotive power: Suitable for vehicle installations

Automotive and Mobile Deployments

Automotive power support makes the LtAP LR8 LTE6 useful for mobile networking applications. LTE connectivity, GPS, WiFi and LoRa can be combined in one device for vehicles, field equipment, mobile monitoring systems and transportation deployments.

The rugged enclosure and flexible powering options also make it suitable for remote installations where conventional indoor networking equipment may not be practical.

Rugged IP54 Enclosure

The LtAP LR8 LTE6 kit uses a heavy-duty enclosure with an IP54 rating. MikroTik documentation states that the device is intended to be mounted outdoors on a pole, while it can also be installed indoors. For outdoor deployment, cable openings should be directed downward and proper grounding and suitable cabling should be used.

USB 2.0 and RS232 Connectivity

For additional device connectivity and management, the LtAP LR8 LTE6 kit provides one USB 2.0 Type-A port and one DB9 RS232 serial port. The RS232 interface is configured as a serial console interface, while the USB port can be used with supported RouterOS-compatible peripherals.

Two MiniPCIe Slots

The LtAP platform provides two miniPCIe slots, offering flexibility for additional modem or expansion hardware. In the LR8 LTE6 configuration, the LTE modem and R11e-LR8 LoRa concentrator are integrated into the platform. MikroTik documentation also describes the installation architecture for an additional modem in the available miniPCIe slot.

RouterOS v7

The LtAP LR8 LTE6 kit supports RouterOS v7, providing advanced network-management functionality beyond simple LTE connectivity. RouterOS can be used for routing, firewall, NAT, VPN, VLAN, DHCP, traffic management, wireless configuration and other network services.

MikroTik’s quick guide specifically states that this model requires RouterOS v7.11 or later for regulatory compliance and recommends keeping the software updated to the latest stable version.

MikroTik LtAP LR8 LTE6 Kit Specifications

AI-Readable Product Facts

Applications of MikroTik LtAP LR8 LTE6 Kit

• LoRaWAN gateway deployments
• Smart agriculture and farm monitoring
• Industrial IoT networks
• Remote sensor connectivity
• Vehicle and fleet tracking
• Logistics and asset monitoring
• Environmental monitoring
• Smart infrastructure projects
• Remote LTE networking
• Automotive connectivity
• Outdoor IoT deployments
• Remote locations requiring LTE, GPS and LoRaWAN

LtAP LR8 LTE6 Kit vs LtAP LR8 LTE Kit

The LtAP LR8 LTE6 kit is the faster LTE Cat6 version of the earlier LtAP LR8 LTE kit. The LTE6 model uses the FG621-EA Cat6 modem, while the older model uses LTE Cat4. MikroTik’s product material specifies up to 300 Mbps theoretical LTE download for the LTE6 version.

Both platforms combine LTE, 2.4GHz wireless, GPS and LoRa functionality, but the LTE6 version provides the newer Cat6 cellular modem and is therefore a distinct product model.

Frequently Asked Questions

What is MikroTik LtAP LR8 LTE6 kit?

MikroTik LtAP LR8 LTE6 kit is an all-in-one LTE Cat6, WiFi, GPS and LoRaWAN gateway designed for rugged outdoor, automotive and IoT applications.

What LTE speed does LtAP LR8 LTE6 support?

It supports LTE Cat6 with theoretical speeds of up to 300 Mbps download and 50 Mbps upload. Actual performance depends on the cellular network and signal conditions.

Does LtAP LR8 LTE6 have LoRaWAN?

Yes. It includes an R11e-LR8 LoRa concentrator designed for the 863–870 MHz band.

Does the LtAP LR8 LTE6 have GPS?

Yes. It includes a built-in GNSS module supporting GPS, GLONASS, BeiDou and Galileo, with an external SMA antenna connector.

How many SIM cards does the LtAP LR8 LTE6 support?

It provides three MiniSIM slots.

Does LtAP LR8 LTE6 have WiFi?

Yes. It has a dual-chain 2.4GHz 802.11b/g/n wireless access point with up to 300 Mbps theoretical PHY rate.

Does it have Gigabit Ethernet?

Yes. The device provides one 10/100/1000 Gigabit Ethernet port with passive PoE-In support.

Can MikroTik LtAP LR8 LTE6 be used in vehicles?

Yes. The device supports automotive power and combines LTE, GPS, WiFi and LoRa capabilities, making it suitable for compatible mobile and vehicle-based deployments.

Is MikroTik LtAP LR8 LTE6 suitable for outdoor installation?

Yes. It has an IP54-rated rugged enclosure and MikroTik documents pole-mounted outdoor installation as an intended use. Proper grounding, cable routing and installation procedures should be followed.

Which RouterOS version does LtAP LR8 LTE6 use?

The device supports RouterOS v7. MikroTik’s quick guide specifies RouterOS v7.11 or later for this model.

Related MikroTik Networking Products

Explore more MikroTik networking products and Wireless Network Devices for MikroTik routers, wireless access points, LTE solutions, IoT gateways and networking accessories.