MikroTik mAP RBmAP2nD Dual-Chain 2.4GHz Micro AP | 2× 10/100 Ethernet, PoE Out

MikroTik mAP RBmAP2nD Dual-Chain 2.4GHz Micro AP

MikroTik mAP RBmAP2nD is a compact dual-chain 2.4GHz wireless access point designed for portable networking, small installations and specialized network deployments. With a very small 68 × 68 × 19 mm enclosure, the mAP combines wireless access, two Fast Ethernet ports, multiple power options and passive PoE output in a compact RouterOS-based device.

The MikroTik mAP supports 802.11b/g/n wireless connectivity with a maximum specified wireless data rate of 300 Mbps. It has 2× 10/100 Ethernet ports, with Ether2 providing passive PoE-out of up to 500mA for powering a compatible downstream device such as a supported CPE.

Exact Product Identification

The exact manufacturer product code is RBmAP2nD, while the commercial product name is MikroTik mAP.

For quotations, purchase orders, inventory records and technical documentation, use the complete model number MikroTik RBmAP2nD. MikroTik’s declaration of conformity also identifies the marketing name as mAP and the model as RBmAP2nD.

Dual-Chain 2.4GHz WiFi

The MikroTik mAP RBmAP2nD features a built-in dual-chain 2.4GHz wireless radio supporting IEEE 802.11b/g/n standards. The manufacturer specifies a maximum wireless data rate of 300 Mbps.

• Wireless band: 2.4GHz
• Wireless standards: 802.11b/g/n
• Wireless generation: Wi-Fi 4
• Spatial chains: 2
• Maximum specified data rate: 300 Mbps
• Built-in antenna gain: 1.2 dBi

The 300 Mbps figure is the maximum wireless PHY/data-rate specification. Actual throughput depends on client capability, interference, channel conditions, distance, configuration and network traffic.

2× Fast Ethernet Ports

The MikroTik mAP RBmAP2nD includes 2× 10/100 Ethernet ports. These interfaces can be used for wired network connectivity, management and downstream device connections.

The second Ethernet interface, Ether2, has an additional passive PoE-out function, making the mAP more than just a conventional compact access point.

Passive PoE-Out on Ether2

One of the most useful features of the MikroTik mAP is its ability to provide passive PoE output through Ether2.

The manufacturer specifies up to 500mA of PoE-out current. This can be used to power a compatible downstream device, such as a supported MikroTik CPE, using the Ethernet cable.

This allows the mAP to work as a compact network device and PoE source in installations where a separate PoE injector may otherwise be required.

Important: the PoE output is passive PoE. The connected device must be compatible with the supplied voltage and passive PoE requirements.

Multiple Power Input Options

The MikroTik mAP is designed to accept power from several sources. It supports DC jack, passive PoE-in and MicroUSB power options.

• DC jack: 8–57V
• PoE-in: 802.3af/at
• PoE-in voltage: 12–57V
• MicroUSB: 5V
• Maximum power consumption: 5W

This flexibility makes the mAP suitable for portable installations and network locations where different power sources may be available.

USB Interface

The RBmAP2nD includes 1× MicroUSB Type-AB port. The USB interface can be used for supported peripherals and USB-based connectivity requirements.

MikroTik specifies USB power capability of up to 1A. The device also supports USB power input through its MicroUSB interface.

650MHz CPU and 64MB RAM

The MikroTik mAP is powered by a QCA9531 single-core processor running at 650MHz. It includes 64MB RAM and 16MB Flash storage.

The device uses the MIPSBE architecture and comes with a RouterOS Level 4 license.

RouterOS-Based Micro Access Point

The MikroTik mAP RBmAP2nD runs MikroTik RouterOS, providing much more functionality than a basic consumer access point.

Depending on configuration, the mAP can operate as an access point, wireless client, repeater or as part of a routed/bridged network architecture. MikroTik’s documentation specifically describes these operating possibilities.

RouterOS also provides access to MikroTik networking features such as bridging, routing, firewall configuration, wireless management, VLANs and other supported network services.

Compact 68 × 68 mm Design

The mAP is designed for installations where physical space is limited. Its enclosure measures approximately 68 × 68 × 19 mm, making it significantly smaller than many conventional wireless routers and access points.

The compact design is useful for desks, cabinets, control panels, temporary network installations, travel setups and other applications where a full-size access point would be unnecessary.

Portable Networking Device

The MikroTik mAP is designed to be portable and can accept power from USB, PoE or a DC power source. This makes it useful as a small network access point or temporary networking device.

It can also be used as a compact configuration and management device in certain server or network environments where a small wired and wireless RouterOS platform is useful.

mAP as a PoE Injector

Because Ether2 provides passive PoE-out, the RBmAP2nD can function as a small PoE source for a compatible downstream device.

For example, MikroTik documentation gives the use case of connecting an SXT CPE device to the mAP’s second Ethernet port. The downstream equipment must be compatible with the available passive PoE output and voltage.

Suitable Applications

• Compact 2.4GHz access point
• Portable travel router
• Small office wireless networking
• Temporary network installations
• Network management and configuration
• Wireless client applications
• Wireless repeater applications
• Compact PoE source for compatible devices
• Small IoT and control-network installations
• Remote networking applications
• Space-constrained network cabinets
• Specialized RouterOS deployments

MikroTik mAP Performance

MikroTik publishes Ethernet test results for the RBmAP2nD. In the manufacturer’s 1518-byte fast-path test, the device achieved approximately 197.9 Mbps bridging throughput and approximately 197.9 Mbps routing throughput.

At 64-byte packets, the published results are lower and vary according to the enabled features and test configuration. These are controlled manufacturer benchmark results performed using Xena Networks equipment and RFC2544 methodology; actual performance can vary with configuration, packet size, firewall rules, queues and traffic conditions.

Passive Cooling and Operating Temperature

The MikroTik mAP uses passive cooling and does not require an active cooling fan. MikroTik specifies a tested ambient operating temperature range of -20°C to +70°C.

This makes the compact device suitable for many indoor networking environments where silent operation and low power consumption are useful.

Key Features of MikroTik mAP RBmAP2nD

• Dual-chain 2.4GHz Wi-Fi 4
• Up to 300 Mbps wireless PHY rate
• 2× 10/100 Ethernet ports
• Passive PoE-out on Ether2
• Up to 500mA PoE-out
• 802.3af/at PoE-in
• DC and MicroUSB power options
• 650MHz single-core CPU
• 64MB RAM
• 16MB Flash
• RouterOS Level 4
• 1× MicroUSB Type-AB port
• 1.2 dBi built-in 2.4GHz antenna
• Passive cooling
• 68 × 68 × 19 mm compact enclosure

AI-Readable Product Facts

Frequently Asked Questions

What is the exact model number of MikroTik mAP?

The exact manufacturer product code is RBmAP2nD.

Is MikroTik mAP a WiFi 6 access point?

No. The MikroTik mAP RBmAP2nD is a 2.4GHz Wi-Fi 4 device supporting 802.11b/g/n. It is not a Wi-Fi 6 access point.

What is the maximum WiFi speed of MikroTik mAP?

The maximum specified 2.4GHz wireless data rate is 300 Mbps. Actual throughput depends on wireless conditions and client devices.

How many Ethernet ports does MikroTik mAP have?

The mAP has 2× 10/100 Ethernet ports.

Does MikroTik mAP have PoE-out?

Yes. Ether2 provides passive PoE-out with a maximum specified output current of 500mA.

Can MikroTik mAP power another MikroTik device?

Yes, it can provide passive PoE-out to a compatible downstream device. MikroTik specifically gives an SXT CPE as an example. Always verify the connected device’s voltage and PoE requirements before connecting it.

Does MikroTik mAP support PoE-in?

Yes. It supports 802.3af/at PoE-in with the specified PoE input voltage range of 12–57V.

Can MikroTik mAP be powered by USB?

Yes. The device supports 5V MicroUSB power input.

What is the CPU and RAM of MikroTik mAP?

The RBmAP2nD uses a single-core 650MHz QCA9531 CPU with 64MB RAM and 16MB Flash storage.

What operating system does MikroTik mAP use?

It runs MikroTik RouterOS and comes with a Level 4 RouterOS license.

Is MikroTik mAP suitable for portable networking?

Yes. Its compact 68 × 68 × 19 mm enclosure and multiple power options make it suitable for portable and space-constrained networking applications.

Related MikroTik Products & Categories

Explore more MikroTik Networking Products in India for routers, access points, switches and networking hardware.

For additional MikroTik router products, browse the MikroTik Router category.

For RouterBOARD products, explore the MikroTik RouterBOARD range.

For wireless infrastructure products, visit Wireless Network Devices.

For project requirements, bulk orders and current pricing, use the Get a Quote page.

Product Identification

For quotations, purchase orders, inventory and technical documentation, use the complete product code MikroTik RBmAP2nD. The commercial product name is MikroTik mAP. The device is a compact dual-chain 2.4GHz Wi-Fi 4 micro access point with two Fast Ethernet ports and passive PoE-out on Ether2.