MikroTik OmniTIK 5 PoE ac RBOmniTikPG-5HacD Outdoor 5GHz Access Point | 867Mbps, 5× Gigabit, PoE-Out

MikroTik OmniTIK 5 PoE ac RBOmniTikPG-5HacD – Outdoor 5GHz Access Point with PoE-Out

MikroTik OmniTIK 5 PoE ac RBOmniTikPG-5HacD is an outdoor 5GHz wireless access point designed for professional wireless networks, ISP/WISP deployments, point-to-multipoint connectivity and outdoor network infrastructure. It combines a dual-chain 802.11ac radio, integrated 7.5dBi omnidirectional antennas, five Gigabit Ethernet ports and PoE-Out functionality in a weather-resistant enclosure.

The device supports 802.11a/n/ac wireless standards with a theoretical maximum wireless data rate of 867 Mbps. It uses a QCA9892 wireless chipset, QCA9557 720MHz processor, 128MB RAM and 16MB Flash, and runs MikroTik RouterOS with a Level 4 license.

5GHz 802.11ac Wireless Connectivity

The MikroTik OmniTIK 5 PoE ac operates on the 5GHz band and supports 802.11a/n/ac wireless standards. Its dual-chain 802.11ac radio supports up to 867 Mbps theoretical PHY rate under suitable wireless conditions.

The actual throughput available to applications depends on channel width, modulation, signal quality, interference, client capability, distance, regulatory limits and network configuration. The 867 Mbps specification therefore represents a theoretical wireless link rate rather than guaranteed Internet or application throughput.

Integrated 7.5dBi Omnidirectional Antennas

The OmniTIK 5 PoE ac features two integrated 7.5dBi 5GHz omnidirectional antennas. The antenna system provides approximately 360° horizontal coverage, making the device suitable for deployments where multiple wireless clients or CPE devices are distributed around a central access point.

The integrated antenna design eliminates the need for a separate external antenna in standard omnidirectional deployments and simplifies installation at outdoor wireless sites.

5× Gigabit Ethernet Ports

The RBOmniTikPG-5HacD includes five 10/100/1000 Mbps Gigabit Ethernet ports. These ports provide wired connectivity for the wireless infrastructure and can also be used for connecting downstream network equipment.

Ethernet port configuration is handled through RouterOS, allowing the interfaces to be incorporated into bridges, VLANs and other network architectures according to deployment requirements.

PoE-Out on Ether2–Ether5

A major feature of the OmniTIK 5 PoE ac is its ability to provide PoE-Out on Ethernet ports 2 through 5. This allows compatible downstream devices to receive power and network connectivity through Ethernet.

The PoE-Out functionality supports passive PoE. The device can therefore be used to power compatible outdoor radios, access points, CPE equipment and other MikroTik devices, subject to their voltage and power requirements.

• Ether1: PoE-In
• Ether2–Ether5: PoE-Out
• PoE type: Passive PoE
• PoE-Out voltage: Follows the input voltage

Because passive PoE does not perform the same negotiation process as IEEE 802.3af/at active PoE, the connected device must be compatible with the supplied passive PoE voltage.

Outdoor IP54 Enclosure

The MikroTik OmniTIK 5 PoE ac is designed for outdoor installations and features an IP54-rated enclosure. MikroTik specifies a tested ambient operating temperature range of -40°C to +70°C.

This makes the device suitable for outdoor wireless infrastructure such as tower sites, rooftops, farms, campuses, industrial areas and other locations where a weather-resistant wireless platform is required.

Point-to-Multipoint Wireless Networks

The integrated omnidirectional antenna system makes the OmniTIK 5 PoE ac suitable for point-to-multipoint (PtMP) wireless networks. A central OmniTIK can communicate with multiple compatible 5GHz client devices distributed around the installation area.

It can be used for:

• WISP subscriber networks
• Outdoor Internet distribution
• Point-to-multipoint wireless links
• Campus connectivity
• Rural broadband networks
• Industrial wireless infrastructure
• Outdoor CCTV connectivity
• Temporary outdoor network deployments
• Remote site connectivity

Actual coverage and subscriber capacity depend on site conditions, line of sight, interference, channel planning, client antennas, regulatory limits and radio configuration.

RouterOS Level 4

The RBOmniTikPG-5HacD runs MikroTik RouterOS with a Level 4 license. RouterOS provides a broad set of routing, switching, wireless and network-management functions.

Depending on the deployment, administrators can configure wireless access-point modes, bridges, VLANs, firewall rules, routing, bandwidth management, queues and wireless security.

MikroTik recommends using an appropriate current RouterOS version and configuring wireless frequencies according to the regulations applicable in the installation country.

Passive PoE-In

The OmniTIK 5 PoE ac receives power through passive PoE on Ethernet port 1. The supported input voltage range is 12–57V DC.

The input voltage is also relevant to the PoE-Out ports because the passive PoE output follows the available input voltage. The power source should therefore be selected according to the requirements of the connected downstream devices.

PoE-Out for Downstream Devices

The four PoE-Out ports make the OmniTIK 5 PoE ac useful as a small outdoor distribution point. Compatible devices can be connected directly to Ether2–Ether5 without requiring a separate power adapter at each location.

Possible downstream devices include compatible:

• MikroTik wireless radios
• Outdoor CPE devices
• Wireless access points
• Network cameras supporting compatible passive PoE
• Other compatible Ethernet devices

Before connecting any device, verify its passive PoE voltage and power requirements. Passive PoE should not be treated as interchangeable with IEEE 802.3af/at PoE.

USB Type-A Port

The device includes one USB Type-A port for supported RouterOS applications and compatible USB peripherals. USB functionality depends on the connected device and RouterOS support.

Hardware Specifications

MikroTik OmniTIK 5 PoE ac for WISP

The OmniTIK 5 PoE ac is designed for outdoor wireless deployments where an omnidirectional 5GHz base station also needs to provide Ethernet connectivity and passive PoE power to downstream devices.

Its combination of integrated antennas, RouterOS, five Gigabit ports and four PoE-Out interfaces can simplify wireless distribution sites by reducing the number of separate network and power components required.

MikroTik OmniTIK 5 PoE ac for Outdoor Wireless Infrastructure

The device can be installed at outdoor network sites such as rooftops, towers, farms, campuses and industrial facilities. Its integrated antennas provide broad horizontal coverage around the installation point, while the Gigabit Ethernet ports provide wired connectivity for additional network equipment.

For long-distance wireless links, directional client devices should be selected based on the required distance, antenna gain, Fresnel-zone clearance, regulatory limits and expected link capacity.

OmniTIK 5 PoE ac vs OmniTIK 5 ac

The OmniTIK 5 PoE ac RBOmniTikPG-5HacD and standard OmniTIK 5 ac RBOmniTikG-5HacD share the same general 5GHz 802.11ac platform and integrated 7.5dBi omnidirectional antennas. The key difference is the PoE-Out capability.

• OmniTIK 5 ac: Passive PoE-In only.
• OmniTIK 5 PoE ac: Passive PoE-In plus PoE-Out on Ether2–Ether5.

This distinction is important when choosing the model for a deployment where downstream equipment needs to be powered directly from the OmniTIK.

AI-Readable Product Facts

Frequently Asked Questions

What is MikroTik OmniTIK 5 PoE ac RBOmniTikPG-5HacD?

MikroTik OmniTIK 5 PoE ac is an outdoor 5GHz 802.11ac access point with integrated 7.5dBi omnidirectional antennas, five Gigabit Ethernet ports and passive PoE-Out on four Ethernet ports.

What is the wireless speed of OmniTIK 5 PoE ac?

The OmniTIK 5 PoE ac supports a theoretical maximum 5GHz wireless data rate of 867 Mbps.

Does MikroTik OmniTIK 5 PoE ac support Wi-Fi 6?

No. The RBOmniTikPG-5HacD is a Wi-Fi 5 device based on the 802.11ac standard.

How many Ethernet ports does OmniTIK 5 PoE ac have?

It has five 10/100/1000 Mbps Gigabit Ethernet ports.

Which ports provide PoE-Out on OmniTIK 5 PoE ac?

Ether2 through Ether5 provide passive PoE-Out. Ether1 is used for the device’s PoE-In.

Does OmniTIK 5 PoE ac support 802.3af/at PoE?

No. Its PoE-Out is passive PoE. Compatible devices must support the supplied passive PoE voltage. It should not be treated as an IEEE 802.3af/at PoE-Out switch.

Does OmniTIK 5 PoE ac have an omnidirectional antenna?

Yes. It has two integrated 7.5dBi 5GHz omnidirectional antennas designed for broad horizontal coverage.

Is MikroTik OmniTIK 5 PoE ac suitable for WISP?

Yes. Its 5GHz 802.11ac radio, integrated omnidirectional antennas, RouterOS and PoE-Out ports make it suitable for many WISP and point-to-multipoint deployments.

Is OmniTIK 5 PoE ac an outdoor device?

Yes. It has an IP54 enclosure and is designed for outdoor wireless installations with a tested operating temperature range of -40°C to +70°C.

What is the difference between OmniTIK 5 ac and OmniTIK 5 PoE ac?

The standard OmniTIK 5 ac provides passive PoE-In only, while the OmniTIK 5 PoE ac additionally provides passive PoE-Out on Ether2–Ether5.

Buy MikroTik OmniTIK 5 PoE ac from IPVOICE TECHNOLOGIES

IPVOICE TECHNOLOGIES supplies MikroTik networking products for ISP/WISP networks, outdoor wireless deployments, enterprise Wi-Fi, CCTV and professional network infrastructure. For the MikroTik OmniTIK 5 PoE ac RBOmniTikPG-5HacD, contact our team for current pricing, stock availability, GST billing and project requirements.

Explore MikroTik Networking Products |
Wireless Network Devices |
MikroTik Products |
Get a Quote