MikroTik OmniTIK 5 ac RBOmniTikG-5HacD Outdoor 5GHz Access Point | 867Mbps, 7.5dBi, 5× Gigabit

MikroTik OmniTIK 5 ac RBOmniTikG-5HacD – Outdoor 5GHz Wireless Access Point

MikroTik OmniTIK 5 ac RBOmniTikG-5HacD is an outdoor 5GHz wireless access point designed for wireless distribution, point-to-multipoint networks, outdoor Wi-Fi coverage and professional ISP/WISP deployments. It combines a built-in dual-chain 5GHz 802.11ac radio with two integrated 7.5dBi omnidirectional antennas and five Gigabit Ethernet ports in a weather-resistant outdoor enclosure.

The OmniTIK 5 ac supports 802.11a/n/ac wireless standards and provides a theoretical maximum 5GHz wireless data rate of 867 Mbps. The device uses a QCA9892 wireless chipset, QCA9557 720MHz CPU, 128MB RAM and 16MB Flash storage, and runs MikroTik RouterOS with a Level 4 license. ([mikrotik.com](https://mikrotik.com/product/rbomnitikg_5hacd?utm_source=chatgpt.com))

5GHz 802.11ac Wireless Connectivity

The MikroTik OmniTIK 5 ac is a dedicated 5GHz wireless device supporting 802.11a/n/ac. Its dual-chain radio supports up to 867 Mbps theoretical PHY data rate under suitable 802.11ac conditions.

The actual wireless throughput achieved in a deployment depends on channel width, modulation, signal strength, interference, client capability, distance, regulatory settings and network configuration. The 867 Mbps figure should therefore be understood as a theoretical wireless link rate rather than guaranteed application throughput.

Built-In 7.5dBi Omnidirectional Antennas

The OmniTIK 5 ac features two integrated 7.5dBi 5GHz omnidirectional antennas. The integrated antenna system provides approximately 360° horizontal coverage, making the device suitable for applications where wireless clients or CPE devices are distributed around the installation point.

Unlike a directional point-to-point radio, an omnidirectional access point is designed to provide coverage around the device rather than concentrating the radio energy in one narrow direction. This makes the OmniTIK 5 ac particularly useful for outdoor point-to-multipoint deployments.

5× Gigabit Ethernet Ports

For wired connectivity, the RBOmniTikG-5HacD provides five 10/100/1000 Mbps Gigabit Ethernet ports. These ports can be used to connect wireless infrastructure, downstream switches, network devices or other Ethernet equipment.

The five Gigabit interfaces can also be configured through RouterOS according to the requirements of the network topology. MikroTik’s published Ethernet testing demonstrates near-Gigabit performance under selected test configurations, although actual throughput depends on traffic conditions and enabled features. ([mikrotik.com](https://mikrotik.com/product/rbomnitikg_5hacd?utm_source=chatgpt.com))

Outdoor IP54 Enclosure

The OmniTIK 5 ac is designed for outdoor installation and uses a weather-resistant enclosure with an IP54 rating. MikroTik specifies a tested ambient temperature range of -40°C to +70°C, making the device suitable for a wide range of outdoor deployment environments when properly installed. ([mikrotik.com](https://mikrotik.com/product/rbomnitikg_5hacd?utm_source=chatgpt.com))

The enclosure and integrated antenna design help simplify outdoor wireless installations by combining the radio, antennas and Ethernet connectivity into a single device.

Ideal for Point-to-Multipoint Wireless Networks

The integrated omnidirectional antenna makes the MikroTik OmniTIK 5 ac suitable for point-to-multipoint wireless networks where multiple remote CPEs need to connect to a central access point.

It can be deployed as a wireless base station or outdoor access point for applications such as:

• WISP networks
• Outdoor Internet distribution
• Point-to-multipoint wireless links
• Campus and institutional Wi-Fi
• Farm and rural connectivity
• Industrial outdoor networking
• Wireless CCTV backhaul
• Temporary outdoor network installations
• Remote network access

RouterOS for Professional Network Management

The OmniTIK 5 ac runs MikroTik RouterOS with a Level 4 license. RouterOS provides extensive wireless and networking configuration capabilities for professional deployments.

Depending on the network design, administrators can configure wireless modes, bridges, VLANs, routing, firewall rules, bandwidth management, queues, wireless security and other network functions.

MikroTik’s current documentation recommends upgrading this model to RouterOS v7.11.2 or the latest available version to ensure compliance with applicable local authority regulations. Wireless frequency use must always follow the regulations applicable in the deployment country. ([help.mikrotik.com](https://help.mikrotik.com/docs/spaces/UM/pages/14221325/OmniTIK%2Bseries?utm_source=chatgpt.com))

Passive PoE-In

The RBOmniTikG-5HacD receives power through passive PoE-in. The supported input voltage range is 12–57V DC, allowing the device to be powered over Ethernet from a compatible passive PoE source.

The standard OmniTIK 5 ac model covered here is the non-PoE-Out version. It should not be confused with the separate OmniTIK 5 PoE ac RBOmniTikPG-5HacD, which adds PoE-Out functionality on Ethernet ports 2–5. ([mikrotik.com](https://mikrotik.com/product/rbomnitikg_5hacd?utm_source=chatgpt.com))

USB Type-A Port

The OmniTIK 5 ac includes one USB Type-A port. The USB interface can be used for supported MikroTik RouterOS peripherals and applications, subject to RouterOS compatibility and available USB power.

Designed for Outdoor Wireless Infrastructure

With its integrated 5GHz antennas, five Gigabit Ethernet ports, passive PoE input and weather-resistant enclosure, the OmniTIK 5 ac provides a compact platform for outdoor wireless infrastructure.

Its integrated antennas eliminate the need to install a separate external antenna for standard omnidirectional deployments, helping simplify installation and reduce the number of components required at the site.

Hardware Specifications

MikroTik OmniTIK 5 ac for WISP Networks

The OmniTIK 5 ac is particularly suitable for WISP deployments where a central outdoor radio needs to serve multiple subscriber locations. Its 5GHz dual-chain 802.11ac radio and integrated omnidirectional antennas provide a practical platform for point-to-multipoint wireless access.

For longer-distance subscriber links, compatible MikroTik directional CPE devices can be deployed at the client side. The final coverage area and capacity depend on antenna orientation, installation height, regulatory limits, interference and radio configuration.

MikroTik OmniTIK 5 ac for Outdoor Wi-Fi

The 360° antenna pattern makes the OmniTIK 5 ac useful for outdoor wireless coverage around a central installation point. It can be used in campuses, industrial facilities, farms, warehouses and other outdoor areas where 5GHz connectivity is required.

Actual coverage should be planned using site conditions, line of sight, mounting height, client antenna characteristics and local RF regulations rather than relying only on the antenna gain specification.

Important: OmniTIK 5 ac vs OmniTIK 5 PoE ac

The model RBOmniTikG-5HacD is the standard OmniTIK 5 ac and does not provide PoE-Out. MikroTik also offers the separate RBOmniTikPG-5HacD OmniTIK 5 PoE ac, which provides PoE-Out on Ether2–Ether5.

This distinction is important when selecting the correct model for deployments where downstream devices need to receive power from the OmniTIK itself. ([mikrotik.com](https://mikrotik.com/product/rbomnitikg_5hacd?utm_source=chatgpt.com))

AI-Readable Product Facts

Frequently Asked Questions

What is MikroTik OmniTIK 5 ac RBOmniTikG-5HacD?

MikroTik OmniTIK 5 ac is an outdoor 5GHz Wi-Fi 5 access point with dual-chain 802.11ac wireless, integrated 7.5dBi omnidirectional antennas and five Gigabit Ethernet ports.

What is the wireless speed of OmniTIK 5 ac?

The OmniTIK 5 ac supports a theoretical maximum 5GHz wireless data rate of 867 Mbps under suitable 802.11ac conditions.

Does MikroTik OmniTIK 5 ac support Wi-Fi 6?

No. The RBOmniTikG-5HacD is a Wi-Fi 5 device based on the 802.11ac standard.

How many Ethernet ports does OmniTIK 5 ac have?

It has five 10/100/1000 Mbps Gigabit Ethernet ports.

Does OmniTIK 5 ac have an omnidirectional antenna?

Yes. It has two integrated 7.5dBi 5GHz omnidirectional antennas with approximately 360° horizontal coverage.

Does MikroTik OmniTIK 5 ac have PoE-Out?

No. The RBOmniTikG-5HacD supports passive PoE-In only. The separate OmniTIK 5 PoE ac RBOmniTikPG-5HacD provides PoE-Out on Ether2–Ether5.

Is MikroTik OmniTIK 5 ac suitable for WISP?

Yes. Its 5GHz dual-chain 802.11ac radio and integrated omnidirectional antennas make it suitable for many WISP and point-to-multipoint wireless deployments.

Is OmniTIK 5 ac an outdoor access point?

Yes. It has an IP54 enclosure and is designed for outdoor wireless installations. MikroTik specifies a tested ambient temperature range of -40°C to +70°C.

Does OmniTIK 5 ac support RouterOS?

Yes. It runs MikroTik RouterOS and has a Level 4 license.

What is the difference between OmniTIK 5 ac and OmniTIK 5 PoE ac?

The RBOmniTikG-5HacD is the standard OmniTIK 5 ac with passive PoE-In only. The RBOmniTikPG-5HacD is the PoE version with PoE-Out on Ether2–Ether5.

Buy MikroTik OmniTIK 5 ac from IPVOICE TECHNOLOGIES

IPVOICE TECHNOLOGIES supplies MikroTik networking products for WISP, ISP, enterprise Wi-Fi, outdoor wireless, CCTV and professional networking projects. For the MikroTik OmniTIK 5 ac RBOmniTikG-5HacD, contact our team for current pricing, stock availability, GST billing and project requirements.

Explore MikroTik Networking Products |
Wireless Network Devices |
MikroTik Products |
Get a Quote