MikroTik SXT SA5 ac RBSXTG-5HPacD-SA 5GHz Outdoor Sector AP | 14dBi, 90° Beamwidth, Gigabit Ethernet

MikroTik SXT SA5 ac 5GHz Outdoor Sector Access Point

MikroTik SXT SA5 ac RBSXTG-5HPacD-SA is a 5GHz outdoor wireless sector access point designed for point-to-multipoint networks, outdoor wireless distribution, CPE connectivity and professional MikroTik wireless deployments. It combines a built-in 14 dBi directional sector antenna with approximately 90° beamwidth, dual-chain 802.11ac wireless, Gigabit Ethernet and MikroTik RouterOS.

The SXT SA5 ac uses a QCA9557 720 MHz single-core processor, 128MB RAM and 128MB NAND storage. It provides one 10/100/1000 Mbps Gigabit Ethernet port and supports PoE input. The device is designed for outdoor installation and has an IP54 enclosure rating.

90° Wide-Beam 5GHz Sector Antenna

The defining feature of the MikroTik SXT SA5 ac is its integrated 90° sector antenna. Unlike a narrow-beam point-to-point radio, the SA model is designed to provide wider angular coverage for point-to-multipoint wireless deployments.

The integrated antenna provides approximately 14 dBi gain at 5GHz and a wide 90° horizontal beam pattern. This makes the SXT SA5 ac suitable for creating a 5GHz wireless sector that can serve multiple compatible client devices positioned within the antenna’s coverage area.

Actual coverage depends on antenna orientation, mounting height, client antenna gain, Fresnel-zone clearance, interference, channel selection, transmit-power restrictions and environmental conditions.

5GHz 802.11ac WiFi 5 Wireless

The MikroTik SXT SA5 ac operates in the 5GHz band and supports 802.11a/n/ac. It uses a dual-chain wireless configuration and supports channel widths of up to 80MHz. MikroTik specifies a maximum wireless data rate of up to 867 Mbps.

The 867 Mbps figure represents the maximum wireless PHY data rate under supported conditions. Real-world throughput will vary according to channel width, modulation, signal level, interference, client capability, distance, configuration and regulatory restrictions.

The SXT SA5 ac is a WiFi 5 / 802.11ac device and should not be described as a WiFi 6 or 802.11ax product.

Point-to-Multipoint Wireless Access Point

The wide 90° sector pattern makes the SXT SA5 ac particularly useful for point-to-multipoint wireless networks. A central SXT SA5 ac can operate as a wireless access point while compatible MikroTik CPE devices connect as clients.

Potential applications include:

• 5GHz point-to-multipoint wireless networks
• Outdoor wireless Internet distribution
• WISP access networks
• Rural broadband deployments
• Campus wireless links
• Building-to-building wireless distribution
• Outdoor network extension
• Wireless CPE networks
• Remote-site connectivity
• MikroTik NV2 wireless deployments

Gigabit Ethernet Connectivity

The SXT SA5 ac includes one 10/100/1000 Mbps Gigabit Ethernet port. This provides the wired network connection between the wireless radio and the upstream switch, router or network infrastructure.

The Gigabit Ethernet interface is particularly useful when deploying the device as a wireless sector AP because it provides a high-speed wired uplink compared with older Fast Ethernet wireless equipment.

Passive PoE and 802.3af/at PoE Input

The MikroTik SXT SA5 ac supports PoE input for simplified outdoor installation. MikroTik specifies support for 802.3af/at PoE, with the device supporting an input range within its documented power specifications. The package includes a Gigabit PoE injector and 24V power adapter.

The maximum specified power consumption is approximately 12W. Always verify the PoE standard, voltage and power requirements before connecting the device to third-party power equipment.

RouterOS Level 4

The SXT SA5 ac runs MikroTik RouterOS and comes with a Level 4 license. RouterOS allows the wireless unit to be configured for different network architectures instead of operating only as a basic fixed-function access point.

Depending on the deployment, RouterOS can provide functions such as:

• Wireless access point configuration
• Wireless client mode
• Bridge configuration
• Routing
• Firewall
• NAT
• DHCP
• VLAN configuration
• Traffic management
• Bandwidth control
• Wireless security
• NV2 TDMA wireless networking

Support for MikroTik NV2 and Nstreme

The SXT ac platform supports MikroTik wireless technologies including NV2 TDMA and legacy Nstreme functionality. It also supports 802.11a/n modes in addition to 802.11ac, providing compatibility options for different MikroTik wireless deployments.

For a MikroTik-based WISP or point-to-multipoint network, NV2 can be used where the network design calls for MikroTik’s proprietary TDMA-based wireless protocol.

Outdoor Wireless Design

The SXT SA5 ac is designed for outdoor deployment with an IP54-rated enclosure. MikroTik specifies a tested ambient temperature range of approximately -40°C to +70°C on its current product specification.

The unit is supplied with mounting accessories intended for pole installation. Correct alignment, mounting stability, grounding and suitable Ethernet/PoE installation practices are important for outdoor wireless deployments.

Dual-Chain 5GHz Radio

The SXT SA5 ac uses a dual-chain 5GHz wireless radio based on the QCA9892 chipset. The two-chain design supports 802.11ac MIMO operation and contributes to the specified wireless PHY rate of up to 867 Mbps.

Wireless performance depends on both ends of the link. A high PHY rate does not guarantee the same application-level throughput because protocol overhead, interference, retransmissions and network configuration affect actual data transfer.

Compact Outdoor Hardware

The SXT SA5 ac uses a compact integrated antenna and radio enclosure designed for pole mounting. The SXT ac family documentation specifies a compact form factor of approximately 140 × 140 × 56 mm for the platform.

The integrated antenna eliminates the need for a separate external sector antenna in standard deployments, simplifying installation and reducing the number of external components.

SXT SA5 ac for WISP Networks

For wireless Internet service providers, the MikroTik SXT SA5 ac can be used as a sector access point serving compatible 5GHz CPE devices. Its 90° beamwidth can be useful when designing coverage sectors around a tower, pole or elevated mounting point.

A WISP deployment may use multiple sector APs to create wider 360° coverage, with each sector assigned an appropriate channel and configured according to local spectrum regulations. Sector planning should account for co-channel interference, adjacent-channel interference, client density and available spectrum.

SXT SA5 ac for Point-to-Multipoint Networks

Unlike narrow-beam point-to-point radios, the SXT SA5 ac is designed around a wider sector radiation pattern. This allows one access point to communicate with multiple remote CPEs distributed across the sector.

The actual number of usable clients depends on the required bandwidth per subscriber, airtime utilization, signal quality, interference and wireless protocol configuration. The device’s maximum PHY rate should not be interpreted as a guaranteed aggregate Internet bandwidth.

Key Features of MikroTik SXT SA5 ac

• 5GHz outdoor wireless sector access point
• WiFi 5 / 802.11a/n/ac
• Dual-chain 2×2 wireless
• Up to 867 Mbps wireless PHY data rate
• Integrated 14 dBi 5GHz antenna
• Approximately 90° sector beamwidth
• 1 × Gigabit Ethernet port
• 802.3af/at PoE input
• QCA9557 720 MHz CPU
• 128MB RAM
• 128MB NAND storage
• RouterOS Level 4
• Outdoor IP54 enclosure
• NV2 and Nstreme support
• USB Type-A port
• Suitable for PtMP, AP and CPE applications

AI-Readable Product Facts

Frequently Asked Questions

What is MikroTik SXT SA5 ac?

MikroTik SXT SA5 ac is a 5GHz outdoor sector access point with a built-in 14 dBi antenna and approximately 90° beamwidth. It supports 802.11a/n/ac and is designed for outdoor wireless and point-to-multipoint deployments.

What is the model number of MikroTik SXT SA5 ac?

The product code is RBSXTG-5HPacD-SA. MikroTik’s current product documentation identifies the international model using this product code.

What frequency does SXT SA5 ac use?

The SXT SA5 ac is a 5GHz wireless device supporting 802.11a/n/ac. The exact usable frequency range depends on the product version and local regulatory requirements.

What is the antenna gain of SXT SA5 ac?

The integrated 5GHz sector antenna has a specified gain of 14 dBi.

What is the beamwidth of MikroTik SXT SA5 ac?

The SA version uses a wide approximately 90° sector beam, making it suitable for point-to-multipoint coverage.

Is MikroTik SXT SA5 ac WiFi 6?

No. SXT SA5 ac is a WiFi 5 / 802.11ac wireless device.

What is the maximum wireless speed of SXT SA5 ac?

MikroTik specifies a maximum 5GHz wireless data rate of up to 867 Mbps. Actual throughput depends on wireless conditions and network configuration.

Does SXT SA5 ac have Gigabit Ethernet?

Yes. It has one 10/100/1000 Mbps Gigabit Ethernet port.

Can SXT SA5 ac be used for point-to-multipoint?

Yes. Its wide 90° sector antenna makes it suitable for point-to-multipoint wireless network designs where multiple compatible CPE devices connect to a central sector AP.

Does SXT SA5 ac support PoE?

Yes. The device supports 802.3af/at PoE input, and the standard package includes a Gigabit PoE injector and power adapter.

What RouterOS license comes with SXT SA5 ac?

The SXT SA5 ac comes with a RouterOS Level 4 license.

Is SXT SA5 ac suitable for WISP deployment?

It can be used as a sector AP in WISP and outdoor wireless networks, particularly where 5GHz point-to-multipoint coverage is required. Network capacity depends on subscriber count, airtime utilization, spectrum availability, signal quality and configuration.

Explore More MikroTik Networking Products

Explore our complete MikroTik Networking Products in India collection for routers, wireless devices, access points and other MikroTik networking hardware.

For additional MikroTik routing products, visit our MikroTik Router category. You can also explore the broader MikroTik RouterBOARD range.

For other MikroTik wireless and network infrastructure products, explore our Wireless Network Devices category.

For current pricing, bulk requirements, GST billing or WISP/networking projects, request a quotation from IPVOICE TECHNOLOGIES.

Frequency and Outdoor Installation Information

The usable 5GHz frequency range can vary according to the product version and country-specific regulations. MikroTik’s documentation states that users are responsible for complying with local frequency, transmit-power, cabling and DFS requirements.

Because the SXT SA5 ac is an outdoor wireless device, professional installation should consider mounting stability, antenna orientation, lightning protection, grounding, Ethernet cabling and the local regulatory environment.

Buy MikroTik SXT SA5 ac RBSXTG-5HPacD-SA from IPVOICE TECHNOLOGIES for 5GHz outdoor sector AP, point-to-multipoint, WISP, CPE and wireless distribution applications. Contact us for current pricing, GST billing, bulk orders and project quotations.