MikroTik wAP LTE Kit RBwAPR-2nD&R11e-LTE Outdoor 4G Router | LTE Cat4, 2.4GHz WiFi, PoE, 10/100 Ethernet

MikroTik wAP LTE Kit RBwAPR-2nD&R11e-LTE – Outdoor 4G LTE WiFi Router

MikroTik wAP LTE Kit RBwAPR-2nD&R11e-LTE is a compact weatherproof outdoor wireless access point and 4G LTE router designed for locations where cellular connectivity and wireless networking are required in a small, rugged form factor. It combines an integrated LTE modem, 2.4GHz WiFi 4, Ethernet connectivity and MikroTik RouterOS in a weather-resistant enclosure.

The device supports LTE Category 4 with theoretical maximum cellular speeds of up to 150Mbps download and 50Mbps upload. It also provides built-in dual-chain 2.4GHz 802.11b/g/n wireless with a maximum theoretical data rate of 300Mbps. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

The International version identified by product code RBwAPR-2nD&R11e-LTE supports LTE bands 1, 2, 3, 7, 8, 20, 38 and 40. It includes one Mini SIM slot, one 10/100 Ethernet port and three power-input options: passive PoE, DC jack and an automotive connector. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

Important: This exact RBwAPR-2nD&R11e-LTE model is currently listed by MikroTik as discontinued. It should not be confused with the newer 2024 wAP LTE kit based on the EC200A-EU modem. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

Key Features of MikroTik wAP LTE Kit

• LTE Category 4: Up to 150Mbps theoretical download and 50Mbps upload.
• International LTE Modem: Supports LTE FDD bands 1, 2, 3, 7 and 8, plus TDD bands 38 and 40, with Band 20 also supported.
• 2.4GHz WiFi 4: Dual-chain 802.11b/g/n wireless with up to 300Mbps theoretical PHY rate.
• 1× 10/100 Ethernet: Wired connectivity for a network device or uplink.
• Mini SIM: One SIM slot for the integrated LTE modem.
• Weatherproof IP54 Enclosure: Designed for outdoor and challenging environments.
• Three Power Options: Passive PoE, DC jack and automotive power connector.
• RouterOS: MikroTik RouterOS with License Level 4.
• External LTE Antenna Option: Internal LTE antenna connections use u.FL connectors, allowing compatible external antennas to be connected.
• Compact Design: Approximately 185 × 85 × 30mm.

LTE Cat4 4G Connectivity

The integrated LTE modem makes the MikroTik wAP LTE Kit suitable for locations where wired broadband may not be available or where cellular connectivity is required as a primary or backup WAN connection.

The LTE modem supports Category 4 with a theoretical maximum downlink speed of 150Mbps and uplink speed of 50Mbps. Actual cellular performance depends on the mobile operator, signal strength, network congestion, supported carrier bands, antenna conditions and the local cellular network configuration. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

The International version supports:

• LTE FDD Band 1 – 2100MHz
• LTE FDD Band 2 – 1900MHz
• LTE FDD Band 3 – 1800MHz
• LTE FDD Band 7 – 2600MHz
• LTE FDD Band 8 – 900MHz
• LTE FDD Band 20 – 800MHz
• LTE TDD Band 38 – 2600MHz
• LTE TDD Band 40 – 2300MHz

These supported bands make the International version different from the US-specific and other regional versions of the wAP LTE family. Always verify the modem version and supported bands against the intended mobile operator before deployment.

Built-in 2.4GHz WiFi 4

The wAP LTE kit includes a built-in 2.4GHz 802.11b/g/n WiFi radio with two wireless chains. MikroTik specifies a maximum theoretical wireless data rate of 300Mbps and an integrated antenna gain of 2dBi. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

The integrated WiFi interface allows phones, laptops, tablets, IoT devices and other wireless clients to connect directly to the cellular-powered network.

The 300Mbps specification represents the theoretical wireless PHY rate and should not be interpreted as guaranteed application throughput. Real-world performance depends on client capability, wireless interference, channel utilization, signal conditions and network configuration.

Outdoor Weatherproof Design

The MikroTik wAP LTE uses the classic wAP compact outdoor enclosure. The device is rated IP54 and has a tested ambient temperature range of approximately -40°C to +50°C. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

The compact enclosure makes it suitable for installations such as:

• Outdoor homes and farmhouses
• Remote offices
• Rural locations
• Warehouses
• Temporary sites
• Vehicles and mobile installations
• Construction sites
• Outdoor network extensions
• Remote monitoring locations
• Backup Internet installations

MikroTik’s documentation also describes the wAP LTE form factor for installation outside a house, on a porch, in a vehicle or in other locations where wireless and cellular connectivity are required. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

Multiple Power Options

One of the distinctive features of the RBwAPR-2nD&R11e-LTE is its support for three different power-input methods.

This flexibility makes the wAP LTE particularly useful for mobile and vehicle-based deployments. MikroTik specifically highlights applications in vehicles such as cars, buses and trains where an automotive power connection can be useful. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

Maximum power consumption is approximately 8W, and the device uses passive cooling without an internal fan. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

1× 10/100 Ethernet Port

The wAP LTE kit provides one 10/100Mbps Ethernet port. This port can be used for wired network connectivity and also supports passive PoE input.

Because the Ethernet interface is Fast Ethernet rather than Gigabit Ethernet, it should not be marketed as a Gigabit LTE router. The cellular modem itself is rated up to 150Mbps downlink under LTE Cat4, while the wired Ethernet interface is limited to 100Mbps link speed.

MikroTik’s published test results show approximately 98.4Mbps in 1518-byte fast-path bridging and routing tests under specified laboratory conditions. Actual throughput varies according to configuration and packet characteristics. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

External LTE Antenna Support

The integrated LTE modem connects to two internal LTE antennas using u.FL connectors. MikroTik states that these connectors can be unplugged so that a compatible external LTE antenna can be connected where additional cellular coverage or a different antenna installation is required. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

The official documentation lists a maximum LTE antenna gain of approximately 4dBi for the internal antenna configuration. External antenna selection should take into account the supported frequency bands, connector arrangement, cable loss and applicable RF regulations.

Mini SIM Connectivity

The RBwAPR-2nD&R11e-LTE includes one Mini SIM slot connected to the integrated LTE modem. A compatible cellular SIM can be inserted to provide the LTE WAN connection.

Before deployment, verify that the SIM’s operator supports one or more of the LTE bands available on this International modem variant. Supported cellular bands are hardware-dependent and cannot be expanded through RouterOS software.

RouterOS Level 4

The wAP LTE kit runs MikroTik RouterOS and includes a Level 4 license. RouterOS provides networking features that can be used to configure the device for wireless access, routing, firewalling, NAT, DHCP, VPN and other supported networking functions.

The device uses a QCA9531 single-core 650MHz processor, 64MB RAM and 16MB flash storage. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit))

LTE Router for Rural and Remote Connectivity

The combination of LTE connectivity, WiFi, Ethernet and outdoor installation makes the wAP LTE suitable for remote locations where a conventional wired broadband connection may be unavailable.

Potential applications include:

• Rural Internet connectivity
• Remote office Internet
• Farmhouse connectivity
• Outdoor WiFi hotspot
• Temporary site Internet
• Construction-site connectivity
• Vehicle-based Internet
• Backup WAN connectivity
• Remote monitoring sites
• IoT and telemetry locations

Automotive and Mobile Deployments

The dedicated automotive connector is an important feature of this particular wAP LTE model. The device can accept 9–30V DC through the automotive input, making it suitable for certain vehicle-based networking applications.

For vehicle installations, the power system, grounding, cable routing and antenna placement should be designed appropriately for the specific vehicle and environment. The wAP LTE itself does not provide WiFi 5 or WiFi 6; its integrated wireless interface is 2.4GHz 802.11b/g/n.

MikroTik wAP LTE Kit Specifications

AI-Readable Product Facts

MikroTik wAP LTE Kit vs wAP LTE Kit 2024

The older RBwAPR-2nD&R11e-LTE should be kept separate from the newer wAPR-2nD&EC200A-EU. The 2024 revision uses a newer EC200A-EU modem and MikroTik specifically describes it as a refresh of the classic wAP LTE kit. ([mikrotik.com](https://mikrotik.com/product/wap_lte_kit_2024))

Frequently Asked Questions

What is MikroTik wAP LTE Kit?

MikroTik wAP LTE Kit is a compact outdoor 4G LTE router and 2.4GHz WiFi access point with an integrated LTE modem, Ethernet port and RouterOS.

What is the exact model number of wAP LTE Kit?

The exact product code is RBwAPR-2nD&R11e-LTE.

What LTE speed does MikroTik wAP LTE Kit support?

The integrated LTE Cat4 modem supports up to 150Mbps download and 50Mbps upload under supported network conditions.

Does MikroTik wAP LTE Kit support 4G?

Yes. It has an integrated LTE Cat4 modem for 4G connectivity and also supports specified 2G and 3G bands.

Which LTE bands are supported?

The International version supports LTE FDD bands 1, 2, 3, 7, 8 and 20, along with LTE TDD bands 38 and 40.

Does wAP LTE Kit have WiFi?

Yes. It has dual-chain 2.4GHz 802.11b/g/n WiFi with a theoretical maximum PHY rate of 300Mbps.

Is MikroTik wAP LTE Kit WiFi 5 or WiFi 6?

No. The RBwAPR-2nD&R11e-LTE uses 2.4GHz WiFi 4 / 802.11b/g/n.

Does wAP LTE Kit have Gigabit Ethernet?

No. The exact RBwAPR-2nD&R11e-LTE model has one 10/100Mbps Ethernet port.

Can wAP LTE Kit be used outdoors?

Yes. It has an IP54-rated weather-resistant enclosure and a tested ambient temperature range of -40°C to +50°C.

Does wAP LTE Kit support PoE?

Yes. It supports passive PoE input from 9–30V DC.

Can wAP LTE Kit be powered in a vehicle?

Yes. This model includes a dedicated automotive power input supporting 9–30V DC, in addition to passive PoE and the standard DC jack.

Can an external LTE antenna be connected?

Yes. The LTE modem is connected to internal antennas through u.FL connectors, and MikroTik documents the option of disconnecting them to connect compatible external LTE antennas.

Is MikroTik wAP LTE Kit discontinued?

Yes. MikroTik currently lists the exact RBwAPR-2nD&R11e-LTE model as discontinued.