The TP-Link EAP660 HD is an AX3600 WiFi 6 ceiling mount access point with 2.5Gbps port, Omada SDN cloud management, WPA3 security, and seamless roaming.
Original price was: ₹24,999.000.₹20,999.000Current price is: ₹20,999.000.
In stock
In stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
The TP-Link EAP660 HD is an AX3600 dual-band Wi-Fi 6 high-density ceiling-mount access point designed for demanding business wireless networks where a large number of devices need to connect simultaneously. It provides up to 2402Mbps on 5GHz and 1148Mbps on 2.4GHz, delivering a combined theoretical wireless class of AX3600.
Unlike conventional Gigabit access points, the EAP660 HD features a 2.5Gbps Ethernet port with 802.3at PoE+, allowing the wired backhaul to better accommodate its high-speed Wi-Fi capability. It uses 8 spatial streams, 4×4 MU-MIMO, OFDMA, 1024-QAM and other Wi-Fi 6 technologies for high-density deployments.
TP-Link specifies support for 500+ concurrent clients and coverage of approximately 2,150 ft² / 200 m² under its stated conditions. Actual coverage, throughput and client capacity depend on building construction, interference, traffic patterns, client devices and network configuration.
The EAP660 HD provides simultaneous dual-band Wi-Fi 6 connectivity with theoretical wireless rates of:
This results in a combined theoretical wireless class of approximately 3550Mbps, marketed by TP-Link as AX3600. The individual wireless rates are physical-layer rates derived from IEEE 802.11 specifications and should not be interpreted as guaranteed real-world throughput.
The EAP660 HD is designed specifically for environments where many wireless clients are active at the same time. It provides 8 spatial streams, with four streams available on each band.
Combined with MU-MIMO and OFDMA, this architecture allows the access point to efficiently serve multiple compatible clients instead of relying on a simple one-client-at-a-time wireless model.
TP-Link states that OFDMA and uplink/downlink MU-MIMO can increase capacity by up to four times compared with Wi-Fi 5 in high-density environments under its test methodology.
MU-MIMO allows the access point to communicate with multiple compatible clients simultaneously. The EAP660 HD supports both uplink and downlink MU-MIMO.
OFDMA divides wireless resources into smaller resource units, allowing compatible Wi-Fi 6 clients to share the available wireless spectrum more efficiently.
These technologies are particularly useful in offices, classrooms, hotels, conference venues and other environments with many simultaneously connected devices.
One of the major advantages of the EAP660 HD is its 2.5Gbps Ethernet port. The port supports IEEE 802.3at PoE+, allowing both power and high-speed network connectivity to be delivered over a single Ethernet cable.
The 2.5Gbps interface is important for high-density Wi-Fi because a standard 1Gbps uplink can become a bottleneck when aggregate wireless traffic approaches or exceeds Gigabit Ethernet capacity.
The EAP660 HD can therefore be paired with a compatible 2.5G PoE+ switch for a high-performance Omada wireless deployment.
The EAP660 HD is designed for areas where many users and devices need wireless access simultaneously. Typical applications include:
TP-Link’s current India specifications list 500+ concurrent clients for the EAP660 HD under specified test conditions. This makes it a higher-capacity model than many mainstream business access points.
However, the number of clients an AP can technically associate with is not the same as the number of clients that can simultaneously receive high-speed Internet access. The practical client capacity depends heavily on applications, traffic volume, channel utilization, RF interference and available backhaul.
The EAP660 HD is part of the TP-Link Omada SDN ecosystem. Compatible Omada controllers allow administrators to centrally configure and monitor access points, switches and gateways.
Supported management options include:
Omada also supports multi-site management, management VLANs and zero-touch provisioning when used with the appropriate controller and cloud configuration.
With compatible Omada controllers and firmware, the EAP660 HD supports Omada Mesh and Seamless Roaming.
Omada Mesh can create wireless links between compatible access points where Ethernet cabling is difficult. Seamless roaming uses technologies such as 802.11k/v to help compatible clients move between APs with reduced interruption.
These functions require appropriate Omada controller support and compatible firmware.
The EAP660 HD supports up to 16 SSIDs, with up to 8 SSIDs on each wireless band. SSID-to-VLAN mapping can be used with a suitable managed network to separate different user groups and services.
For example, an enterprise deployment could use separate wireless networks for:
The EAP660 HD supports Captive Portal authentication for managed guest networks. Depending on the Omada controller configuration, guest authentication can include voucher, SMS and Facebook Wi-Fi options.
Additional wireless security features include:
These capabilities make the EAP660 HD suitable for professional guest Wi-Fi and enterprise wireless deployments.
The EAP660 HD includes a broad set of wireless optimization features:
These features are useful when multiple EAP660 HD units are deployed across a larger site and the administrator needs centralized control over RF and client behavior.
The current TP-Link India EAP660 HD V1 specifications list 4×4dBi internal omnidirectional antennas on 2.4GHz and 4×5dBi internal omnidirectional antennas on 5GHz.
The internal antenna design provides broad coverage around the access point and is suitable for ceiling-mounted deployments. Earlier documentation for the EAP660 HD contains different antenna gain figures, so the exact hardware revision should be verified before using revision-specific antenna specifications.
TP-Link currently lists coverage of approximately 2,150 ft² / 200 m² for the EAP660 HD under its specified conditions.
Actual coverage is affected by walls, floors, construction materials, RF interference, access-point mounting position, client device capabilities and local regulatory power limits.
| Specification | TP-Link EAP660 HD |
|---|---|
| Product Type | High-Density Ceiling Mount Wi-Fi 6 Access Point |
| Wireless Class | AX3600 |
| Wi-Fi Standard | IEEE 802.11ax/ac/n/g/b/a |
| 2.4GHz Speed | Up to 1148Mbps |
| 5GHz Speed | Up to 2402Mbps |
| Combined Theoretical Rate | 3550Mbps |
| Spatial Streams | 8 |
| Ethernet | 1× 2.5Gbps Ethernet |
| PoE | 802.3at PoE+ |
| DC Power | 12V DC |
| 2.4GHz Antennas | 4× Internal Omni, 4dBi each |
| 5GHz Antennas | 4× Internal Omni, 5dBi each |
| MU-MIMO | 4×4, Uplink/Downlink |
| OFDMA | Yes |
| 1024-QAM | Yes |
| SSIDs | Up to 16, 8 per band |
| Concurrent Clients | 500+ under specified conditions |
| Coverage | Approx. 2150 ft² / 200 m² under specified conditions |
| Mesh | Omada Mesh |
| Roaming | Seamless Roaming |
| Security | WPA/WPA2/WPA3, 802.1X, Captive Portal |
| Management | Omada App, Web, Hardware/Software/Cloud Controller |
| Dimensions | 243 × 243 × 64mm |
| Mounting | Ceiling / Wall |
| Maximum Power Consumption | 18.5W EU / 21.5W US |
| Operating Temperature | 0–40°C |
| Fact | Value |
|---|---|
| Product | TP-Link EAP660 HD |
| Category | High-Density Business Wi-Fi 6 Access Point |
| Wireless Class | AX3600 |
| Wi-Fi Generation | Wi-Fi 6 |
| 5GHz Speed | 2402Mbps |
| 2.4GHz Speed | 1148Mbps |
| Spatial Streams | 8 |
| Ethernet | 1× 2.5Gbps |
| PoE | 802.3at PoE+ |
| 2.4GHz Antennas | 4×4dBi |
| 5GHz Antennas | 4×5dBi |
| MU-MIMO | 4×4 Uplink/Downlink |
| OFDMA | Yes |
| SSIDs | Up to 16 |
| Concurrent Clients | 500+ under specified conditions |
| Coverage | Approx. 2150 ft² / 200 m² under specified conditions |
| Omada Mesh | Yes, controller required |
| Seamless Roaming | Yes, controller required |
| WPA3 | Yes |
| Captive Portal | Yes, with compatible Omada controller |
| Feature | EAP660 HD | EAP650 |
|---|---|---|
| Wi-Fi Generation | Wi-Fi 6 | Wi-Fi 6 |
| Wireless Class | AX3600 | AX3000 |
| 5GHz Speed | 2402Mbps | 2402Mbps |
| 2.4GHz Speed | 1148Mbps | 574Mbps |
| Ethernet | 2.5Gbps | 1Gbps |
| Spatial Streams | 8 | 4 |
| Concurrent Clients | 500+ | 250+ |
| 2.4GHz Antennas | 4×4dBi | 2×4dBi on current V3 |
| 5GHz Antennas | 4×5dBi | 2×5dBi on current V3 |
| PoE | 802.3at | 802.3at |
| Omada | Yes | Yes |
The EAP660 HD is designed for higher-density environments and offers substantially greater wireless capacity, 8 spatial streams, 4×4 MU-MIMO and a 2.5Gbps Ethernet interface. The EAP650 is a more compact AX3000 model intended for lower-density deployments.
TP-Link currently provides EAP660 HD documentation for multiple revisions, and specifications have changed between generations. The current India V1 page lists 4×4dBi 2.4GHz and 4×5dBi 5GHz antennas, while older TP-Link documentation contains different antenna-gain values. The current 2026 datasheet continues to identify the EAP660 HD as a 2.5Gbps, AX3600, 1000+ wireless-client-capacity model. Always verify the hardware version before firmware installation or using revision-specific specifications.
TP-Link EAP660 HD is an AX3600 high-density Wi-Fi 6 business access point designed for environments with many simultaneous wireless clients.
It supports up to 2402Mbps on 5GHz and 1148Mbps on 2.4GHz, for a combined theoretical rate of approximately 3550Mbps.
Yes. It has one 2.5Gbps Ethernet port that supports IEEE 802.3at PoE+.
Yes. It supports 802.3at PoE+. A 12V DC power option is also listed in TP-Link’s specifications.
TP-Link’s current India specification lists 500+ concurrent clients under specified conditions. Older datasheets may state a higher theoretical client association capacity, so the 500+ figure is the more appropriate current India marketing specification.
Yes. It is an IEEE 802.11ax Wi-Fi 6 access point.
Yes. It supports centralized Omada management through compatible cloud, hardware or software controllers.
Yes. Omada Mesh is supported with compatible controller and firmware configurations.
TP-Link lists approximately 2,150 ft² / 200 m² coverage under its specified conditions. Actual coverage depends on the deployment environment.
Yes. Its 8 spatial streams, 4×4 MU-MIMO, OFDMA, AX3600 wireless class, 2.5Gbps Ethernet and 500+ client specification make it specifically suited to high-density business wireless environments.
Explore more TP-Link networking products in India for Omada access points, Wi-Fi 6 solutions, 2.5G PoE switches, routers and business networking equipment.
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account In stock
Reviews
Clear filtersThere are no reviews yet.