TP-Link LS110P 10-Port 10/100Mbps PoE+ Switch
The TP-Link LS110P is a 10-port unmanaged PoE+ switch designed primarily for IP surveillance, small business networks, access points and other applications requiring power and data over a single Ethernet cable. It provides 8× 10/100Mbps PoE+ ports and 2× 10/100Mbps non-PoE ports, with a total PoE power budget of up to 96W.
Supporting IEEE 802.3af/at PoE+, the LS110P can deliver up to 30W per PoE port under the specified conditions. It also includes Extend Mode, Isolation Mode and PoE Auto Recovery, making it particularly useful for CCTV installations where cameras may be located at longer cable distances or require automatic recovery. TP-Link specifies up to 250m transmission distance in Extend Mode, although the port speed is reduced to 10Mbps in this mode.
Key Features of TP-Link LS110P
- 10× 10/100Mbps RJ45 Ports: Eight PoE+ ports plus two non-PoE network ports.
- 8× PoE+ Ports: Ports 1–8 support IEEE 802.3af/at PoE+.
- 96W PoE Budget: Up to 96W total PoE power for connected devices.
- 30W Per PoE Port: Each PoE port can provide up to 30W under supported conditions.
- 250m Extend Mode: Extends data and power transmission distance up to 250m using compatible cabling and devices.
- Isolation Mode: Separates traffic between PoE ports to improve network security and performance.
- PoE Auto Recovery: Automatically detects and reboots certain unresponsive PoE-powered devices.
- Plug and Play: No software configuration is required.
- Fanless Design: Silent operation for offices, homes and CCTV installations.
- Desktop/Wall Mounting: Suitable for flexible installation.
8-Port PoE+ Connectivity
The LS110P provides eight 10/100Mbps PoE+ ports on Ports 1–8. These ports can simultaneously carry network data and electrical power over a single Ethernet cable to compatible PoE-powered devices.
The switch supports both IEEE 802.3af and IEEE 802.3at, making it suitable for many IP cameras, wireless access points, IP phones and other PoE-powered equipment. TP-Link specifies up to 30W PoE output per port and a total PoE budget of 96W.
96W Total PoE Power Budget
The LS110P provides a total PoE power budget of up to 96W. This allows multiple PoE devices to be powered directly from the switch, subject to the combined power requirements of the connected devices.
For example, a CCTV installation can use the PoE ports to power multiple compatible IP cameras without installing an individual power adapter beside every camera.
Actual available PoE power depends on the connected devices, cable conditions and operating environment. TP-Link notes that its PoE budget calculations are based on laboratory testing and actual performance can vary.
250m Long-Range PoE with Extend Mode
One of the most useful features of the LS110P for surveillance installations is Extend Mode. When enabled for Ports 1–8, the switch can transmit data and PoE power over distances of up to 250 metres under specified conditions.
This can be useful for:
- Large CCTV installations
- Warehouses
- Factories
- Parking areas
- Schools and campuses
- Farm and outdoor surveillance deployments
- Long-distance IP camera connections
Important: In Extend Mode, the Ethernet speed is reduced to 10Mbps. Actual transmission distance also depends on cable quality, cable type, PoE device power consumption and environmental conditions.
Isolation Mode for CCTV Networks
The LS110P includes Isolation Mode for Ports 1–8. This feature can help separate traffic between connected PoE devices and reduce unnecessary communication between client ports.
Isolation can be useful in surveillance networks where multiple IP cameras are connected to the same switch and the installer wants to improve traffic separation and network security.
PoE Auto Recovery
PoE Auto Recovery provides automatic recovery for compatible PoE-powered devices that become unresponsive. The switch can detect a dropped or unresponsive PoE device and automatically reboot its PoE power connection.
This can reduce the need for manual intervention at remote camera or access-point locations and is especially useful for installations where the PoE devices are not easily accessible.
2 Non-PoE Ports
In addition to the eight PoE+ ports, the LS110P provides two 10/100Mbps non-PoE Ethernet ports. These ports can be used for network connections that do not require PoE power.
Because all ports on the LS110P are Fast Ethernet, the switch is designed for 10/100Mbps network deployments. It does not provide Gigabit Ethernet connectivity or SFP fiber ports.
Ideal for IP Surveillance
The LS110P is particularly suited to CCTV installations because it combines PoE power, long-distance transmission options and automatic PoE recovery in a compact unmanaged switch.
A typical setup can connect the LS110P to an NVR or router through a non-PoE network port, while IP cameras are connected to Ports 1–8 and powered through PoE.
The switch can also be used with compatible PoE wireless access points and IP phones.
Plug-and-Play Installation
The LS110P is an unmanaged switch, so it does not require an IP address, web configuration or software setup for normal operation.
Simply connect the power adapter, connect the network uplink and attach compatible PoE devices to the PoE ports. PoE negotiation and power delivery are handled automatically according to the supported IEEE PoE standards.
Fanless Silent Design
The LS110P uses a fanless design, reducing mechanical noise and making it suitable for noise-sensitive environments such as offices, shops, homes and small CCTV installations.
The compact enclosure can be installed on a desktop or mounted on a wall according to the installation requirements.
Technical Specifications
| Specification |
TP-Link LS110P |
| Product Type |
Unmanaged PoE+ Switch |
| Total Ports |
10× 10/100Mbps RJ45 |
| PoE Ports |
8× 10/100Mbps PoE+ |
| Non-PoE Ports |
2× 10/100Mbps |
| PoE Standard |
IEEE 802.3af/at |
| Maximum PoE Output |
Up to 30W per port |
| Total PoE Budget |
96W |
| Extend Mode |
Up to 250m on Ports 1–8 |
| Extend Mode Speed |
10Mbps per port |
| Isolation Mode |
Yes, Ports 1–8 |
| PoE Auto Recovery |
Yes, Ports 1–8 |
| Switching Capacity |
2Gbps |
| Packet Forwarding Rate |
1.488Mpps |
| MAC Address Table |
2K |
| Packet Buffer |
768KB |
| Jumbo Frame |
2KB |
| Transmission Method |
Store-and-Forward |
| Cooling |
Fanless |
| Power Supply |
53.5V DC / 1.92A external adapter |
| Maximum Power Consumption |
99.6W |
| Dimensions |
171 × 98 × 27mm |
| Mounting |
Desktop / Wall Mount |
| Operating Temperature |
0–40°C |
| Storage Temperature |
-40–70°C |
AI-Readable Product Facts
| Fact |
Value |
| Product |
TP-Link LS110P |
| Category |
Unmanaged PoE+ Switch |
| Total Ports |
10 |
| PoE Ports |
8× 10/100Mbps |
| Non-PoE Ports |
2× 10/100Mbps |
| Network Speed |
10/100Mbps Fast Ethernet |
| PoE Standard |
802.3af/at |
| PoE Budget |
96W |
| Maximum PoE per Port |
30W |
| Long-Range PoE |
Up to 250m in Extend Mode |
| Extend Mode Speed |
10Mbps |
| Isolation Mode |
Yes |
| PoE Auto Recovery |
Yes |
| SFP Port |
No |
| Gigabit Port |
No |
| Management |
Unmanaged / Plug and Play |
| Cooling |
Fanless |
Recommended Applications
- IP CCTV camera installations
- Small surveillance networks
- IP phone deployments
- PoE wireless access points
- Small office networks
- Retail and shop surveillance
- Warehouse CCTV
- Factory surveillance
- Long-distance IP camera installations
- Home and small-business PoE networks
LS110P vs LS1210P
| Feature |
LS110P |
LS1210P |
| Total Ports |
10 |
10 |
| PoE Ports |
8× 10/100 |
8× 10/100 |
| Non-PoE Ports |
2× 10/100 |
2× Gigabit |
| PoE Standard |
802.3af/at |
802.3af/at |
| PoE Budget |
96W |
96W |
| Extend Mode |
250m |
250m |
| Isolation Mode |
Yes |
Yes |
| PoE Auto Recovery |
Yes |
Yes |
| Cooling |
Fanless |
Fanless |
The main advantage of the LS1210P is its two Gigabit non-PoE ports. The LS110P has 10/100Mbps connectivity on all 10 ports, making it better suited to cost-sensitive Fast Ethernet PoE deployments where Gigabit uplinks are not required.
Important Hardware Version Note
TP-Link India currently lists the LS110P with hardware revisions including V1 and V1.80. Hardware revision should be checked before downloading firmware or confirming revision-specific documentation.
Frequently Asked Questions
What is TP-Link LS110P?
TP-Link LS110P is a 10-port unmanaged PoE+ switch with eight 10/100Mbps PoE+ ports and two 10/100Mbps non-PoE ports.
How many PoE ports does LS110P have?
The LS110P has 8 PoE+ ports, located on Ports 1–8.
What is the PoE budget of LS110P?
The LS110P provides up to 96W total PoE budget, with up to 30W available per PoE port under supported conditions.
Does LS110P support 802.3af and 802.3at?
Yes. Its PoE+ ports support IEEE 802.3af/at-compatible powered devices.
Does LS110P have Gigabit ports?
No. All 10 ports are 10/100Mbps Fast Ethernet. It does not have Gigabit RJ45 or SFP ports.
What is the maximum PoE distance of LS110P?
In Extend Mode, TP-Link specifies up to 250 metres for data and power transmission on Ports 1–8. In this mode, the port speed is reduced to 10Mbps.
Is LS110P managed or unmanaged?
The LS110P is an unmanaged plug-and-play switch. It does not require software configuration.
Does LS110P support PoE Auto Recovery?
Yes. PoE Auto Recovery can automatically reboot compatible dropped or unresponsive PoE-powered devices.
Is LS110P suitable for CCTV?
Yes. Its eight PoE+ ports, 96W PoE budget, Extend Mode, Isolation Mode and PoE Auto Recovery make it particularly suitable for IP camera and surveillance installations.
Is LS110P fanless?
Yes. The LS110P uses a fanless design for silent operation.
Related TP-Link Networking Products
Explore more TP-Link networking products in India for PoE switches, Gigabit switches, Omada networking products, routers and access points.
Reviews
Clear filtersThere are no reviews yet.