CP PLUS 8 Port PoE Switch CP-DNW-HPU8G2-96-V3 | 96W Budget | 2 Gigabit Uplink | PoE Watchdog | VLAN Mode | 2 Year Warranty

Reliable Power Distribution for Modern Surveillance

The CP PLUS 8 Port PoE Switch CP-DNW-HPU8G2-96-V3 is a specialized networking solution designed for high-demand security environments. It provides eight 10/100 Mbps ports that deliver both data and power through a single Ethernet cable. This design eliminates the need for extra electrical wiring near your IP cameras or wireless access points. Senior engineers value this switch for its simplicity and the steady power it maintains across all connected nodes. Each PoE port can output up to 30W, adhering to the IEEE 802.3at and 802.3af standards. This high output ensures that even PTZ cameras or infrared-heavy devices receive enough juice to operate during peak night hours. With a total power budget of 96W, you can populate multiple ports without worrying about power drops or system instability.

Intelligent PoE Watchdog Technology

One of the standout features of this CP PLUS 8 Port PoE Switch is the built-in PoE Watchdog function. This system acts as a silent guardian by constantly monitoring the status of connected cameras. If a camera stops responding or hangs due to a software glitch, the switch automatically detects the failure. It then power-cycles the specific port to reboot the device without any manual intervention. This automation reduces downtime and saves on-site maintenance costs. It is especially useful for cameras installed in hard-to-reach locations like high ceilings or outdoor poles.

High-Speed Gigabit Uplink Connectivity

While the downstream ports handle camera traffic at 10/100 Mbps, the two Gigabit uplink ports provide a high-speed highway to your core network. These 1000 Mbps ports prevent bottlenecks when multiple high-definition video streams move toward the NVR or server. Using separate uplink ports keeps your camera traffic isolated from the rest of your local network. This architecture ensures that your recording stays fluid and jitter-free even during heavy network usage. It also allows for daisy-chaining multiple switches without sacrificing bandwidth for the main controller.

Advanced Network Security and Efficiency

In a busy network, broadcast storms can often disrupt camera performance. The CP PLUS 8 Port PoE Switch includes a dedicated VLAN mode to combat this exact problem. When you toggle the VLAN switch, the PoE ports are isolated from one another while still communicating with the uplink ports. This isolation prevents a single faulty camera from flooding the entire network with unnecessary traffic. It also adds a layer of security by preventing unauthorized access between different devices on the same switch. System integrators prefer this mode for multi-tenant buildings or mixed-use office spaces.

Professional-Grade Hardware Design

The physical build of the CP-DNW-HPU8G2-96-V3 is geared toward longevity in professional racks or cabinets. It features a sturdy metal casing that helps dissipate heat naturally without the need for loud internal fans. This silent operation makes it a great choice for small office environments where noise is a concern. The switch also includes 4KV lightning protection to shield your expensive hardware from sudden electrical surges. This protection is a critical requirement for outdoor camera installations where lightning strikes are a real risk. When you source your gear from an authorized CP PLUS dealer in India, you are guaranteed a product that meets these exact technical benchmarks.

Simplified Installation and Management

Installing the CP PLUS 8 Port PoE Switch is straightforward thanks to its plug-and-play architecture. There is no complex software to configure or IP addresses to assign for the switch itself. It supports Auto-MDI/MDIX, meaning you don’t need special crossover cables to connect it to other networking devices. The front-panel LEDs provide instant visual feedback on power usage and link status for every port. This allows technicians to troubleshoot connectivity issues at a glance without using a laptop. The switch also supports store-and-forward switching, which checks data packets for errors before sending them to their destination.

Technical Specifications Breakdown

• Total Ports: 8 x 10/100 Mbps PoE ports and 2 x 10/100/1000 Mbps Uplink ports
• PoE Standard: IEEE 802.3af/at compliant
• Max Power Budget: 96 Watts total
• Max Port Power: 30 Watts per individual port
• Switching Capacity: Up to 5.6 Gbps backplane bandwidth
• Transmission Distance: Supports up to 250 meters in extend mode
• Lightning Protection: 4KV surge protection for all ports
• Warranty: 2-year manufacturer warranty for peace of mind

Choosing the Right Switch for Your Project

Selecting the right CP PLUS 8 Port PoE Switch can make the difference between a grainy video feed and a crisp, reliable security system. This model hits the sweet spot for small to medium-sized projects that require more than basic connectivity. It is common to see this switch used in retail stores, residential complexes, and bank branches. Its ability to handle high-definition 4K streams via the gigabit uplinks makes it future-proof for upcoming camera upgrades. The 2-year warranty ensures that your investment is protected against manufacturing defects. By focusing on stability and ease of use, CP PLUS has created a tool that solves the everyday problems of a network engineer. Whether you are expanding an existing setup or building a new one, this switch provides the necessary infrastructure. Its compact footprint allows for flexible mounting in wall boxes or standard network racks. Reliability is not just a feature here; it is the foundation of the hardware’s engineering. Invest in a switch that understands the unique demands of 24/7 video surveillance. The CP-DNW-HPU8G2-96-V3 delivers the power and the speed required for modern IP-based security.