Ubiquiti PBE-5AC-Gen2 PowerBeam 5AC – 5GHz airMAX ac Wireless Bridge
The Ubiquiti PBE-5AC-Gen2 PowerBeam 5AC Gen2 is a high-performance outdoor wireless bridge designed for 5GHz Point-to-Point (PtP) connectivity. Featuring an integrated 25 dBi directional dish antenna, airMAX ac wireless technology and a Gigabit Ethernet interface, it provides a dedicated solution for connecting buildings, remote sites and network locations without requiring a physical cable between them.
Its dish reflector design helps focus wireless signals in a specific direction, making it suitable for outdoor links where directional performance and reliable alignment are important. The PowerBeam 5AC Gen2 is designed for wireless ISPs, system integrators, enterprise networks and professional outdoor wireless installations.
Explore more Point-to-Point and Point-to-MultiPoint wireless bridges and outdoor wireless networking devices at IPVOICE TECHNOLOGIES.
25 dBi Directional Dish Antenna
The PBE-5AC-Gen2 features an integrated 25 dBi directional dish antenna designed to provide focused wireless connectivity. Its reflector helps concentrate the radio signal toward the intended remote station, supporting dedicated outdoor links when the units are correctly aligned and installed with a suitable line of sight.
The integrated antenna and radio design helps simplify deployment by avoiding a separate external antenna cable. Correct antenna alignment, mounting stability and suitable channel planning are essential for achieving reliable wireless performance.
5GHz airMAX ac Wireless Technology
Powered by Ubiquiti airMAX ac technology, the PowerBeam 5AC Gen2 is designed for dedicated outdoor wireless broadband links. It supports configurable channel widths up to 80 MHz in Point-to-Point mode and up to 40 MHz in Point-to-MultiPoint mode.
The device supports Access Point and Station configurations for compatible wireless network designs. A typical Point-to-Point installation uses two compatible wireless radios, one at each end of the link. The actual throughput and link distance depend on signal conditions, channel width, interference, line of sight, regulatory limits and the complete network configuration.
Gigabit Ethernet Connectivity
The Ubiquiti PBE-5AC-Gen2 includes one 10/100/1000 Mbps Gigabit Ethernet port for connecting the wireless bridge to a router, network switch or other Ethernet-enabled device. The Gigabit interface provides a faster wired connection compared with older Fast Ethernet outdoor CPE models.
For other Ubiquiti wireless solutions, compare the Ubiquiti LBE-5AC-Gen2 LiteBeam, which uses a 23 dBi panel-style directional antenna, or the Ubiquiti LBE-M5-23 LiteBeam M5 for older airMAX M5 deployments.
Dedicated Management Wi-Fi and airOS
The PowerBeam 5AC Gen2 includes a dedicated 2.4GHz management radio to support convenient device setup and configuration through compatible mobile management tools. It runs Ubiquiti airOS 8, providing configuration and monitoring features for professional wireless installations.
Installers can use the management interface to configure wireless settings, monitor link status and perform alignment checks during deployment. This helps simplify setup and ongoing management of outdoor wireless links.
24V Passive PoE Power
The PBE-5AC-Gen2 uses 24V passive Power over Ethernet to deliver power and network connectivity through a single Ethernet cable. The official single-unit package includes a 24V, 0.5A Gigabit PoE adapter. Maximum power consumption is specified at 8.5W.
Power compatibility note: This model uses 24V passive PoE. It must not be treated as a standard IEEE 802.3af/at PoE device. Check the voltage and passive PoE pinout before connecting it to a third-party PoE switch or power source.
Outdoor-Ready Design and Pole Mounting
The PowerBeam 5AC Gen2 is designed for outdoor installation and includes a pole-mounting kit. Its dish reflector is made from powder-coated SPCC, while the antenna feed uses outdoor UV-stabilized plastic. The mounting assembly allows installers to position and align the dish toward the remote wireless station.
The manufacturer specifies an operating temperature range of -40°C to 70°C and wind survivability up to 200 km/h under its stated test conditions. Proper pole mounting, grounding, surge protection and weather-appropriate cable installation remain important for outdoor deployments.
Applications of Ubiquiti PBE-5AC-Gen2
- Point-to-Point wireless links: Connect two buildings, offices or remote network locations using a dedicated 5GHz wireless link.
- Wireless ISP networks: Deploy as part of a compatible airMAX ac wireless broadband network.
- Business and campus connectivity: Establish outdoor network connections between separate buildings and facilities.
- Industrial networking: Extend connectivity to warehouses, factories and remote operational locations.
- Remote CCTV backhaul: Carry IP surveillance traffic between remote camera locations and a central network, subject to bandwidth planning.
- Long-range network extension: Provide wireless connectivity where installing fiber or Ethernet cabling is impractical.
For additional outdoor wireless solutions, browse the Ubiquiti networking product range and compare other wireless bridge products for your deployment requirements.
Technical Specifications – Ubiquiti PBE-5AC-Gen2
| Specification |
Details |
| Brand |
Ubiquiti |
| Model |
PBE-5AC-Gen2 |
| Product Family |
airMAX PowerBeam 5AC Gen2 |
| Product Type |
Outdoor Wireless Bridge |
| Wireless Technology |
airMAX ac |
| Frequency Band |
5 GHz |
| Worldwide Frequency Specification |
5150–5875 MHz; permitted channels depend on country regulations |
| Antenna Gain |
25 dBi |
| Maximum Output Power |
24 dBm |
| Networking Interface |
1 × 10/100/1000 Mbps Gigabit Ethernet |
| Management Radio |
2.4 GHz Wi-Fi |
| Channel Width – PtP |
10 / 20 / 30 / 40 / 50 / 60 / 80 MHz |
| Channel Width – PtMP |
10 / 20 / 30 / 40 MHz |
| Processor |
MIPS 74Kc |
| Memory |
64 MB |
| Power Method |
24V Passive PoE |
| Power Supply |
24V, 0.5A Gigabit PoE Adapter |
| Supported Voltage Range |
20–26V DC |
| Maximum Power Consumption |
8.5W |
| Dimensions |
420 × 420 × 230 mm |
| Weight |
2.22 kg |
| Reflector Material |
Powder-coated SPCC |
| Antenna Feed Material |
Outdoor UV-stabilized plastic |
| Mounting |
Pole Mounting Kit Included |
| Wind Survivability |
Up to 200 km/h |
| Operating Temperature |
-40°C to 70°C |
| Operating Humidity |
5–95% non-condensing |
| Certifications |
CE, FCC, IC |
Buy Ubiquiti PBE-5AC-Gen2 PowerBeam in India
Looking to buy the Ubiquiti PBE-5AC-Gen2 PowerBeam 5AC in India? IPVOICE TECHNOLOGIES offers networking and wireless connectivity solutions for ISPs, system integrators, IT professionals and business networks.
The PowerBeam 5AC Gen2 is suitable for compatible 5GHz airMAX ac deployments requiring a directional 25 dBi dish antenna and Gigabit Ethernet connectivity. Before purchasing, verify compatibility with your existing wireless equipment, local frequency regulations and the intended network design.
Explore our wireless bridge category to compare outdoor wireless connectivity solutions.
Official Manufacturer Resources
Neha Jain –
high performance point to pint best for long range i.e. 15km plus.