MikroTik CSS610-8G-2S+IN is a compact Layer 2 switch with 8 Gigabit ports and 2 10G SFP+ ports, ideal for quiet, high-performance office and SOHO networking.
Original price was: ₹19,999.000.₹12,999.000Current price is: ₹12,999.000.
In stock
In stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
MikroTik CSS610-8G-2S+IN is a compact Cloud Smart Switch designed for Gigabit Ethernet networks that require high-speed 10G fiber uplinks. It provides 8 × 10/100/1000 Gigabit Ethernet ports and 2 × 10G SFP+ ports in a compact indoor chassis.
The switch runs SwOS Lite, MikroTik’s lightweight operating system designed specifically for CSS610 series switches. It provides web-based management with features including VLAN configuration, port isolation, link aggregation, traffic limiting, ACLs, port mirroring, RSTP and IGMP snooping.
The MikroTik CSS610-8G-2S+IN provides eight individual Gigabit Ethernet ports supporting 10/100/1000 Mbps connectivity.
These ports can connect computers, servers, IP phones, access points, printers, CCTV equipment, NAS devices and other Ethernet-based network equipment.
| Ethernet Feature | Specification |
|---|---|
| Gigabit Ethernet Ports | 8 × 10/100/1000 Mbps |
| Port Type | RJ45 |
| Auto MDI/X | Yes |
| Maximum Ethernet Speed | 1Gbps per port |
The eight Gigabit ports provide the access-side connectivity, while the two SFP+ ports can be used for higher-speed uplinks.
A major advantage of the CSS610-8G-2S+IN is its two 10G SFP+ ports. These interfaces can be used for fiber or compatible direct-attach/copper SFP+ connectivity.
This allows the switch to connect to a 10G aggregation switch, router, server, storage system or another high-speed network device.
For a small office or network cabinet, the combination of eight Gigabit access ports and two 10G uplinks provides a practical way to connect local devices while maintaining higher-capacity backbone connectivity.
MikroTik specifies approximately 28 Gbps non-blocking throughput for the CSS610-8G-2S+IN.
The switch also provides approximately 56 Gbps switching capacity and 41.7 Mpps forwarding rate according to MikroTik’s published product specifications.
| Performance Metric | Specification |
|---|---|
| Non-Blocking Throughput | 28 Gbps |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| MAC Address Table | Up to 16K entries |
The MikroTik CSS610-8G-2S+IN uses SwOS Lite. It is specifically designed for administration of CSS610 series switches.
Configuration is performed through a web browser, making the switch relatively straightforward to manage without the full routing complexity of RouterOS.
Important: CSS610 series switches support SwOS Lite only. RouterOS is not supported on the CSS610-8G-2S+IN.
The CSS610 supports IEEE 802.1Q VLAN functionality through SwOS Lite. VLANs can be used to logically separate network traffic between different departments, users, CCTV systems, IP phones, guest networks and management infrastructure.
The CSS610 series supports up to 250 VLAN entries as limited by SwOS Lite.
The switch supports 802.3ad LACP as well as static link aggregation groups.
SwOS Lite supports up to 16 link aggregation groups, with up to eight member ports per group according to MikroTik’s current CSS610 series documentation.
Link aggregation can be useful when connecting compatible network equipment that requires increased aggregate bandwidth or link redundancy.
The CSS610 provides several Layer 2 management and security functions, including port isolation, port locking, broadcast storm control and ACL functionality.
The current SwOS Lite documentation lists up to 32 ACL rules, with classification based on port and L2/L3/L4 protocol header fields.
The switch supports Rapid Spanning Tree Protocol (RSTP). RSTP can help prevent Layer 2 network loops in appropriately designed redundant Ethernet topologies.
This is useful in managed networks where multiple switches or redundant connections are deployed.
The MikroTik CSS610 supports IGMP snooping and unknown multicast filtering.
These features can help manage multicast traffic in networks where IPTV, video distribution or other multicast applications are deployed.
For compatible network applications, the CSS610 series supports jumbo frames up to approximately 10218 bytes.
Jumbo frame configuration should be consistent across the relevant devices and network path for reliable operation.
The CSS610-8G-2S+IN can be powered using passive PoE through its first Ethernet port.
MikroTik specifies a passive PoE input range of 12–57V DC. The device also includes a dedicated DC power jack supporting the same 12–57V DC range.
Important: this is PoE-in only. The CSS610-8G-2S+IN does not provide PoE-out to connected Ethernet devices.
| Power Feature | Specification |
|---|---|
| PoE Input | Passive PoE |
| PoE-In Voltage | 12–57V DC |
| PoE-In Port | Ether1 |
| DC Jack | 12–57V DC |
| PoE-Out | No |
The CSS610-8G-2S+IN is designed as a low-power compact switch. MikroTik specifies approximately 5W maximum power consumption without attachments and up to 11W maximum consumption with attachments.
This makes the switch suitable for small network cabinets, office installations and deployments where power efficiency and compact hardware are important.
The CSS610-8G-2S+IN measures approximately 200 × 167 × 46 mm.
Rack ears are included, allowing the switch to be installed in a suitable rackmount environment. It can also be deployed on a desktop or shelf where appropriate. MikroTik specifies the device for indoor installation.
The CSS610-8G-2S+IN is intended for indoor use. The official documentation specifies an IP20 enclosure and an operating temperature range of approximately 0°C to +60°C in the current quick guide.
The switch should be installed in a dry and ventilated location away from water, excessive humidity and unsuitable heat sources.
The combination of eight Gigabit Ethernet ports and two 10G SFP+ uplinks makes the MikroTik CSS610 suitable for small and medium network deployments.
For example, computers, printers, access points and IP phones can use the eight Gigabit ports, while the SFP+ interfaces can connect the switch to a higher-speed core or aggregation switch.
The CSS610 can be used as a Gigabit aggregation switch in IP surveillance networks where cameras receive power from separate PoE switches or injectors.
Because the CSS610-8G-2S+IN has no PoE-out, it should not be positioned as a PoE CCTV switch. A separate PoE source is required for cameras that need Ethernet power.
The two 10G SFP+ ports can provide high-speed uplinks to compatible servers, NAS systems, storage equipment or upstream switches.
This makes the CSS610 useful in environments where most endpoints require Gigabit connectivity but one or two high-speed links are needed for backbone or storage traffic.
Both switches belong to MikroTik’s Cloud Smart Switch family, but their port density and operating system architecture differ.
| Feature | CSS610-8G-2S+IN | CSS326-24G-2S+RM |
|---|---|---|
| Gigabit Ports | 8 | 24 |
| 10G SFP+ Ports | 2 | 2 |
| Operating System | SwOS Lite | SwOS |
| PoE-In | Passive 12–57V | Passive 11–30V |
| Primary Design | Compact 8-Port Switch | 24-Port Rackmount Switch |
The CSS610 is therefore better positioned around compact 8-port Gigabit deployments with 10G uplinks, while the CSS326 provides substantially more Gigabit access ports in a 1U rackmount format.
| Specification | Details |
|---|---|
| Product Name | MikroTik CSS610-8G-2S+IN |
| Product Type | Cloud Smart Switch |
| Gigabit Ethernet Ports | 8 × 10/100/1000 Mbps |
| 10G Uplink Ports | 2 × SFP+ |
| Switch Chip | Marvell 88E6193X |
| Operating System | SwOS Lite |
| RouterOS | Not supported |
| Non-Blocking Throughput | 28 Gbps |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| MAC Table | Up to 16K entries |
| VLAN | IEEE 802.1Q |
| PoE-In | Passive PoE |
| PoE-In Voltage | 12–57V DC |
| DC Input | 12–57V DC |
| Maximum Power Consumption | 11W |
| Dimensions | 200 × 167 × 46 mm |
| Operating Temperature | 0°C to +60°C |
| IP Rating | IP20 |
| Installation | Indoor / Desktop / Rackmount |
| Attribute | Fact |
|---|---|
| Product | MikroTik CSS610-8G-2S+IN |
| Category | Cloud Smart Managed Switch |
| RJ45 Ports | 8 × Gigabit Ethernet |
| Uplink Ports | 2 × 10G SFP+ |
| Switch Chip | Marvell 88E6193X |
| Operating System | SwOS Lite |
| RouterOS | Not supported |
| Non-Blocking Throughput | 28 Gbps |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| PoE-In | Passive PoE on Ether1 |
| PoE-In Voltage | 12–57V DC |
| PoE-Out | No |
| Maximum Power | 11W |
| Primary Applications | SMB, Office LAN, 10G Uplink, Server/NAS, CCTV Aggregation |
MikroTik CSS610-8G-2S+IN is a compact managed Cloud Smart Switch with 8 Gigabit Ethernet ports and 2 10G SFP+ ports.
It has 8 × 10/100/1000 Gigabit Ethernet ports.
It has 2 × SFP+ ports designed for 10G connectivity.
No. The CSS610 series supports SwOS Lite only. RouterOS is not supported on the CSS610-8G-2S+IN.
SwOS Lite is MikroTik’s lightweight switch operating system designed specifically for CSS610 series switches. It provides browser-based Layer 2 switch management.
Yes. It supports IEEE 802.1Q VLAN functionality, with up to 250 VLAN entries according to the SwOS Lite documentation.
Yes. It has two dedicated SFP+ ports for 10G connectivity.
It supports passive PoE-in through Ether1. It does not provide PoE-out.
The specified passive PoE input range is 12–57V DC.
MikroTik specifies 56 Gbps switching capacity, 28 Gbps non-blocking throughput and 41.7 Mpps forwarding rate.
Yes. The two SFP+ interfaces can be used for compatible 10G fiber, DAC or other supported SFP+ connectivity.
Yes, as a network switch or CCTV aggregation switch when cameras receive power from a separate PoE source. The CSS610-8G-2S+IN itself does not provide PoE-out.
Yes. Rack ears are included and the switch can be installed in a suitable rackmount environment. It can also be used on a desktop.
MikroTik specifies up to 5W without attachments and up to 11W maximum with attachments.
IPVOICE TECHNOLOGIES supplies MikroTik switches, routers, SFP/SFP+ modules and networking products for business, enterprise, ISP, CCTV and infrastructure deployments.
The MikroTik CSS610-8G-2S+IN can be supplied with applicable GST billing, project quotations and nationwide delivery support.
For pricing, stock availability or bulk/project requirements, visit the Get a Quote page.
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account In stock
Reviews
Clear filtersThere are no reviews yet.