The MikroTik hAP ac lite RB952Ui-5ac2nD is a compact dual-band 802.11ac router with five Gigabit ports and PoE-in support, ideal for homes and small offices.
Original price was: ₹7,999.000.₹6,499.000Current price is: ₹6,499.000.
29 in stock
29 in stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
The MikroTik hAP ac lite RB952Ui-5ac2nD is a compact dual-band wireless router and access point designed for home, small-office and basic managed networking environments. It provides simultaneous 2.4GHz and 5GHz WiFi, five Fast Ethernet ports, passive PoE-out on Ether5 and a USB Type-A port for compatible 3G/4G modems.
The hAP ac lite uses a 650MHz single-core QCA9531 processor, 64MB RAM and 16MB Flash storage. It runs MikroTik RouterOS with a Level 4 license, providing advanced routing, firewall, VLAN, VPN, bandwidth management and wireless configuration capabilities.
With an AC750-class wireless specification, the device supports up to 300Mbps on 2.4GHz and up to 433Mbps on 5GHz under the manufacturer’s specified wireless PHY rates. It is important to note that all five Ethernet interfaces are 10/100Mbps, not Gigabit Ethernet.
The MikroTik hAP ac lite provides simultaneous wireless connectivity on both 2.4GHz and 5GHz frequency bands. This allows compatible clients to use the 5GHz band while maintaining support for devices that rely on 2.4GHz WiFi.
The 2.4GHz radio supports 802.11b/g/n with two wireless chains and a maximum PHY rate of 300Mbps. The 5GHz radio supports 802.11a/n/ac with a single wireless chain and a maximum PHY rate of 433Mbps.
The combined wireless specification of the hAP ac lite is commonly described as AC750, based on its 300Mbps 2.4GHz and 433Mbps 5GHz maximum PHY rates.
These numbers represent theoretical wireless link rates rather than guaranteed Internet or application throughput. Actual performance depends on client hardware, channel conditions, interference, signal strength, protocol overhead and network configuration.
The router has five 10/100Mbps Ethernet ports. These are Fast Ethernet interfaces and should not be confused with Gigabit Ethernet.
The five Ethernet ports can be configured through RouterOS for WAN, LAN, VLAN, bridging, routing and other supported network functions. The exact port configuration can be customized according to the deployment.
Ether5 supports passive PoE-out with a maximum total output current of 500mA. This allows the hAP ac lite to power a compatible passive-PoE device through the fifth Ethernet port.
Passive PoE-out is useful in MikroTik installations where a nearby compatible device needs to receive power from the router. The connected equipment must be compatible with the specified passive PoE output.
The MikroTik hAP ac lite includes one USB Type-A port with up to 1A available USB current. The USB interface can be used with compatible 3G/4G modems, providing an additional option for Internet connectivity.
This can be useful for backup Internet connectivity or deployments where a compatible cellular modem is used as the WAN connection.
The hAP ac lite is powered by a QCA9531 single-core CPU running at 650MHz. It uses the MIPSBE architecture and includes 64MB RAM and 16MB Flash storage.
The hardware is designed for the routing, wireless and network-management capabilities supported by this product class.
The device runs MikroTik RouterOS with a Level 4 license. RouterOS gives the hAP ac lite much more configuration flexibility than a conventional basic consumer WiFi router.
Depending on the network design, administrators can configure features such as:
The hAP ac lite is designed as a compact wireless networking device for homes and small offices. Its dual-band WiFi and five Ethernet interfaces provide wired and wireless connectivity in a single device.
It can be used as a primary router, wireless access point, basic network gateway or managed MikroTik networking device depending on the configuration.
The 5GHz radio supports 802.11a/n/ac, making it a WiFi 5-compatible radio. The maximum specified 5GHz wireless data rate is 433Mbps using a single wireless chain.
The 2.4GHz radio is based on WiFi 4 / 802.11b/g/n and uses two chains with a maximum specified rate of 300Mbps.
The hAP ac lite supports two power-input methods: a DC jack and passive PoE-in. The supported DC input range is 10–28V, while passive PoE-in also supports 10–28V.
The device has a maximum power consumption of approximately 20W with attachments and approximately 8W without attachments. A 24V 1.2A power adapter is included.
The hAP ac lite uses passive cooling, so there is no internal cooling fan. This provides a simple low-noise design suitable for typical indoor installations.
The hAP ac lite has an IP20 rating and is intended for indoor use. Its compact 113 × 89 × 28mm enclosure allows it to be placed conveniently on a desk or other suitable indoor location.
It should not be treated as an outdoor-rated networking device.
MikroTik’s published testing for the RB952Ui-5ac2nD reports approximately 493Mbps aggregate throughput in its 1518-byte fast-path bridging and routing tests across the 100Mbps interfaces.
These are manufacturer benchmark measurements using Xena Networks equipment under specified test conditions. Actual performance depends on packet size, firewall rules, queues, configuration and traffic patterns.
MikroTik lists two versions of the hAP ac lite hardware: the RB952Ui-5ac2nD International version and the RB952Ui-5ac2nD-US USA version.
The International model supports wider frequency ranges subject to local regulatory restrictions, while the USA model has factory frequency restrictions. The exact legal operating frequencies, output power and DFS requirements depend on the country where the device is deployed.
| Specification | Details |
|---|---|
| Product Code | RB952Ui-5ac2nD |
| Product Name | hAP ac lite |
| Product Type | Dual-Band Wireless Router / Access Point |
| Wireless Class | AC750 |
| 2.4GHz Standard | 802.11b/g/n |
| 5GHz Standard | 802.11a/n/ac |
| 2.4GHz Maximum Rate | 300Mbps |
| 5GHz Maximum Rate | 433Mbps |
| 2.4GHz Chains | 2 |
| 5GHz Chains | 1 |
| 2.4GHz Antenna Gain | 1.5 dBi |
| 5GHz Antenna Gain | 2 dBi |
| Ethernet | 5× 10/100Mbps |
| CPU | QCA9531 |
| CPU Cores | 1 |
| CPU Frequency | 650MHz |
| RAM | 64MB |
| Storage | 16MB Flash |
| USB | 1× USB Type-A |
| PoE-In | Passive PoE |
| PoE-In Voltage | 10–28V |
| PoE-Out | Passive PoE on Ether5 |
| PoE-Out Current | 500mA maximum |
| Operating System | RouterOS |
| RouterOS License | Level 4 |
| Cooling | Passive |
| IP Rating | IP20 |
| Dimensions | 113 × 89 × 28 mm |
| Operating Temperature | -30°C to +70°C tested |
| Brand | MikroTik |
|---|---|
| Model | RB952Ui-5ac2nD |
| Product Name | hAP ac lite |
| Category | Dual-Band Wireless Router / Access Point |
| WiFi Class | AC750 |
| 2.4GHz | 802.11b/g/n, 2×2, up to 300Mbps |
| 5GHz | 802.11a/n/ac, 1×1, up to 433Mbps |
| Ethernet | 5× 10/100Mbps Fast Ethernet |
| CPU | QCA9531 single-core @ 650MHz |
| RAM | 64MB |
| Storage | 16MB Flash |
| USB | 1× USB Type-A for compatible 3G/4G modem |
| PoE-In | Passive PoE, 10–28V |
| PoE-Out | Passive PoE on Ether5, 500mA maximum |
| Operating System | RouterOS Level 4 |
| Cooling | Passive |
| Primary Applications | Home, small office, basic routing, dual-band WiFi and 3G/4G backup |
The MikroTik hAP ac lite is a compact dual-band wireless router with 2.4GHz and 5GHz WiFi, five 10/100 Ethernet ports, passive PoE-out and a USB port for compatible 3G/4G modems.
No. All five Ethernet ports on the RB952Ui-5ac2nD are 10/100Mbps Fast Ethernet. It does not have Gigabit Ethernet ports.
The maximum specified wireless PHY rate is 300Mbps on 2.4GHz and 433Mbps on 5GHz, making it an AC750-class device.
Its 5GHz radio supports 802.11ac / WiFi 5. The 2.4GHz radio uses 802.11b/g/n / WiFi 4.
The router has 5× 10/100Mbps Ethernet ports.
Yes. Ether5 supports passive PoE-out with a maximum total output current of 500mA.
Yes. It has one USB Type-A port that can be used with compatible 3G/4G modems and supported USB devices.
The device has 64MB RAM and 16MB Flash storage.
It uses a QCA9531 single-core 650MHz processor.
Yes. It runs MikroTik RouterOS with a Level 4 license.
Yes. The USB Type-A port supports compatible 3G/4G modems, allowing cellular connectivity where supported.
IPVOICE TECHNOLOGIES supplies MikroTik routers, wireless access points and networking hardware for home, SMB, enterprise and infrastructure requirements. For MikroTik hAP ac lite RB952Ui-5ac2nD requirements, contact us for current availability, pricing, GST billing and project quotations.
IPVOICE TECHNOLOGIES
1/9 First Floor, Ratan Khand, Sharda Nagar, Lucknow – 226002, Uttar Pradesh, India
Phone/WhatsApp: +91 7347735150
Email: ipvoicetechnologies@gmail.com
In stock
Out of stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account 29 in stock
Reviews
Clear filtersThere are no reviews yet.