MikroTik Metal 52 ac RBMetalG-52SHPacn Outdoor AP | 2.4/5GHz, 802.11ac, Gigabit Ethernet

MikroTik Metal 52 ac RBMetalG-52SHPacn Outdoor Wireless AP

MikroTik Metal 52 ac RBMetalG-52SHPacn is a rugged outdoor wireless networking device designed for 2.4GHz and 5GHz wireless applications. It supports 802.11a/n/ac on 5GHz and 802.11b/g/n on 2.4GHz, with the wireless band selected through software rather than operating both bands simultaneously.

The MikroTik Metal 52 ac combines a high-power wireless radio, Gigabit Ethernet, a rugged metal outdoor enclosure and an N-male antenna connector. It is supplied with a dual-band omni-directional antenna rated at 6 dBi on 2.4GHz and 8 dBi on 5GHz, allowing the device to be used directly out of the box or with a compatible external antenna.

Exact Product Identification

The exact manufacturer product code is RBMetalG-52SHPacn, while the commercial product name is MikroTik Metal 52 ac.

MikroTik’s official Declaration of Conformity identifies the marketing name as Metal 52 ac and the model as RBMetalG-52SHPacn.

Software-Selectable 2.4GHz or 5GHz Wireless

One of the defining characteristics of the MikroTik Metal 52 ac is its selectable wireless band. The device can operate on either 2.4GHz or 5GHz depending on the configured wireless mode and deployment requirements.

• 2.4GHz: 802.11b/g/n
• 5GHz: 802.11a/n/ac
• Wireless chains: 1
• Maximum specified wireless data rate: 433 Mbps
• Channel width: up to 80MHz on supported 5GHz 802.11ac operation

The maximum wireless data-rate specification is not the same as guaranteed application throughput. Actual performance depends on channel width, client capability, interference, signal level, regulatory restrictions, antenna characteristics and network configuration.

802.11ac High-Speed Wireless

The Metal 52 ac RBMetalG-52SHPacn adds 802.11ac support to the rugged MikroTik Metal platform. On compatible 5GHz networks, it supports wider channels of up to 80MHz.

The device also maintains compatibility with legacy wireless standards, allowing it to operate with 802.11a/n/ac clients on 5GHz and 802.11b/g/n clients on 2.4GHz.

High-Power Outdoor Wireless Design

The Metal 52 ac is built around a rugged metal enclosure intended for outdoor wireless deployments. MikroTik specifies an IP55 rating and a tested ambient temperature range of -40°C to +70°C.

The metal enclosure is designed for outdoor networking applications such as wireless backbone links, CPE deployments and outdoor access points where a compact weather-resistant wireless platform is required.

Built-In N-Male Antenna Connector

The MikroTik Metal 52 ac uses an N-male antenna connector, allowing it to connect directly to compatible external antennas.

The supplied dual-band omni-directional antenna provides:

• 6 dBi gain at 2.4GHz
• 8 dBi gain at 5GHz

This gives the Metal 52 ac flexibility for both general outdoor coverage and specialized antenna-based wireless links. The supplied antenna can be used for a ready-to-deploy configuration, while a compatible external antenna can be selected for a specific coverage or link design.

1× Gigabit Ethernet Port

The RBMetalG-52SHPacn includes 1× 10/100/1000 Gigabit Ethernet port. The Gigabit interface provides the wired network connection and helps avoid the 100Mbps Ethernet limitation found on older Metal wireless models.

The Ethernet port supports MDI-X auto-detection and is also used for passive PoE power input.

Passive PoE-In

The MikroTik Metal 52 ac is powered through passive PoE. The manufacturer specifies a PoE input voltage range of 10–30V.

The package includes a Gigabit PoE injector and a 24V 0.8A power adapter, allowing the device to be deployed without purchasing a separate basic power-and-PoE setup.

The maximum specified power consumption is approximately 11W.

RouterOS-Based Outdoor Wireless Platform

The Metal 52 ac runs MikroTik RouterOS and includes a Level 4 RouterOS license. This provides access to MikroTik’s networking platform for wireless configuration, routing, bridging, firewalling, VLANs and other supported networking functions.

The device comes with the operating system preinstalled and licensed. MikroTik states that software updates are provided free for the life of the product or for a minimum of five years from the purchase date.

Outdoor AP, Backbone and CPE

The flexible wireless architecture allows the MikroTik Metal 52 ac RBMetalG-52SHPacn to be used in several deployment roles.

• Outdoor wireless access point
• Wireless backbone
• Customer premises equipment (CPE)
• Point-to-point wireless links
• Outdoor network extension
• Remote-site connectivity
• Rural wireless networking
• ISP/WISP wireless infrastructure
• Building-to-building connectivity
• Directional antenna-based wireless installations

MikroTik officially describes the Metal 52 ac as a software-selectable AP/Backbone/CPE platform.

Compact Rugged Metal Enclosure

The device measures approximately 215 × 60 × 38 mm. Its metal enclosure provides a compact form factor for outdoor mounting while accommodating the wireless radio, Ethernet interface and N-type antenna connection.

The passive cooling design eliminates the need for a cooling fan, helping keep the device mechanically simple for outdoor deployment.

Hardware Platform

The MikroTik Metal 52 ac uses a QCA9556 single-core CPU operating at a nominal frequency of 720MHz. It includes 64MB RAM and 16MB Flash storage.

The hardware uses the MIPSBE architecture and runs RouterOS with a Level 4 license.

Wireless Transmit Power

The Metal 52 ac is designed as a high-output wireless device. MikroTik publishes transmit power figures for different wireless modulation rates.

For example, the manufacturer’s specifications list up to 31 dBm transmit power at selected lower data rates on both 2.4GHz and 5GHz. Actual permitted transmit power is subject to country-specific regulatory limits, channel selection, antenna gain and the applicable wireless rules.

Ethernet Performance

MikroTik publishes Ethernet benchmark results for the RBMetalG-52SHPacn. In the manufacturer’s 1518-byte fast-path test, the device achieved approximately 986 Mbps bridging throughput and approximately 986 Mbps routing throughput.

These are controlled manufacturer test results using Xena Networks equipment and RFC2544 methodology. Actual performance can vary depending on packet size, firewall rules, queues, wireless load and other configuration factors.

Monitoring Features

The Metal 52 ac includes hardware monitoring functions that can help with device management and troubleshooting.

• PCB temperature monitoring
• Voltage monitoring
• Built-in beeper

These features are useful when deploying the device in outdoor or remote network environments where monitoring hardware conditions can assist with maintenance.

Metal 52 ac vs Dual-Band Simultaneous APs

It is important to understand that MikroTik Metal 52 ac is not a simultaneous dual-band access point. Although it supports both 2.4GHz and 5GHz, the wireless interface is software-selectable between the bands.

This makes the device more appropriate for installations where the required wireless band is selected according to the deployment rather than environments that require simultaneous 2.4GHz and 5GHz client access from the same radio.

Key Features of MikroTik Metal 52 ac

• 2.4GHz / 5GHz software-selectable wireless
• 802.11a/n/ac on 5GHz
• 802.11b/g/n on 2.4GHz
• Up to 433 Mbps specified wireless data rate
• 1× Gigabit Ethernet
• N-male antenna connector
• 6 dBi 2.4GHz omni antenna included
• 8 dBi 5GHz omni antenna included
• Passive PoE-in
• 10–30V PoE input
• QCA9556 720MHz CPU
• 64MB RAM
• 16MB Flash
• RouterOS Level 4
• IP55 outdoor enclosure
• Passive cooling
• -40°C to +70°C tested ambient temperature

AI-Readable Product Facts

Frequently Asked Questions

What is the exact model number of MikroTik Metal 52 ac?

The exact manufacturer product code is RBMetalG-52SHPacn.

Is MikroTik Metal 52 ac dual-band?

Yes, it supports both 2.4GHz and 5GHz, but the wireless band is software-selectable rather than simultaneous dual-band operation.

Is MikroTik Metal 52 ac WiFi 6?

No. The Metal 52 ac is a WiFi 5 / 802.11ac generation device on 5GHz. It also supports 802.11b/g/n on 2.4GHz.

What is the maximum wireless speed of Metal 52 ac?

The manufacturer specifies a maximum wireless data rate of 433 Mbps. Actual throughput depends on wireless conditions and configuration.

Does MikroTik Metal 52 ac have a Gigabit Ethernet port?

Yes. It includes 1× 10/100/1000 Gigabit Ethernet port.

What antenna comes with MikroTik Metal 52 ac?

The package includes a dual-band omni-directional antenna rated at 6 dBi for 2.4GHz and 8 dBi for 5GHz.

Can I use an external antenna with Metal 52 ac?

Yes. The device has an N-male antenna connector, allowing connection to a compatible external antenna.

Does MikroTik Metal 52 ac support PoE?

Yes. It uses passive PoE-in with a specified input voltage range of 10–30V.

Is MikroTik Metal 52 ac suitable for outdoor use?

Yes. It has an IP55-rated outdoor enclosure and a tested ambient operating temperature range of -40°C to +70°C.

Can Metal 52 ac be used as a CPE?

Yes. MikroTik specifies the Metal 52 ac for AP, backbone and CPE applications.

What operating system does MikroTik Metal 52 ac use?

It runs RouterOS and includes a Level 4 RouterOS license.

Does Metal 52 ac support 80MHz channels?

Yes. On supported 5GHz 802.11ac configurations, the device supports channel widths up to 80MHz.

Related MikroTik Products & Categories

Explore more MikroTik Networking Products in India for routers, outdoor wireless systems, CPEs and networking hardware.

For outdoor wireless equipment, browse Wireless Network Devices.

You can also explore the MikroTik RouterBOARD range for additional RouterOS-based networking platforms.

For other MikroTik routing products, visit the MikroTik Router category.

For project requirements, bulk orders and current pricing, use the Get a Quote page.

Product Identification

For quotations, purchase orders, inventory and technical documentation, use the exact product code MikroTik RBMetalG-52SHPacn. The commercial product name is MikroTik Metal 52 ac. It is a rugged outdoor 2.4GHz/5GHz software-selectable 802.11ac wireless platform with Gigabit Ethernet, an N-male antenna connector and included dual-band omni antenna.