MikroTik NetMetal 5 RB922UAGS-5HPacD-NM 5GHz Outdoor PTP & PTMP | 867Mbps, SFP, Mini PCIe & Dual RP-SMA

MikroTik NetMetal 5 5GHz Outdoor Wireless Access Point

MikroTik NetMetal 5 is a rugged outdoor 5GHz wireless networking device designed for access point, wireless backbone and CPE applications. Its exact manufacturer product code is RB922UAGS-5HPacD-NM. The device uses dual-chain 802.11a/n/ac wireless technology and supports a maximum 5GHz wireless data rate of up to 867 Mbps.

NetMetal 5 combines a high-power 5GHz radio with a rugged metal enclosure, Gigabit Ethernet, SFP connectivity, external antenna connectors and expansion capability through a Mini PCI-e slot. It is suitable for outdoor wireless infrastructure, point-to-point links, point-to-multipoint deployments, WISP networks, wireless backhaul and specialized outdoor networking projects.

Key Features of MikroTik NetMetal 5

• Exact model: RB922UAGS-5HPacD-NM
• 5GHz dual-chain 802.11a/n/ac wireless
• Wi-Fi 5 / 802.11ac generation
• Maximum wireless data rate up to 867 Mbps
• 2× RP-SMA female connectors for external antennas
• 1× 10/100/1000 Gigabit Ethernet
• 1× SFP cage
• 1× Mini PCI-e slot
• 1× Mini SIM slot for compatible 3G/4G modem applications
• 1× USB Type-A port
• QCA9557 single-core 720MHz CPU
• 128MB RAM
• 128MB NAND storage
• RouterOS Level 4 license
• Passive PoE-in
• Passive cooling
• IP54-rated metal enclosure
• Tested operating temperature from -40°C to +70°C

Dual-Chain 5GHz 802.11ac Wireless

The MikroTik NetMetal 5 uses a dual-chain 5GHz radio based on the QCA9882 chipset. It supports 802.11a/n/ac wireless standards and provides a maximum theoretical wireless data rate of 867 Mbps.

The dual-chain architecture supports 2×2 wireless operation when paired with a suitable compatible antenna. Actual throughput depends on channel width, modulation, signal strength, interference, antenna characteristics, distance, regulatory limits and the configuration of the connected devices.

External Antenna Support

Unlike an outdoor access point with a fixed integrated antenna, NetMetal 5 provides two RP-SMA female connectors for external antennas. This allows network designers to select an antenna according to the intended wireless application.

The device can therefore be integrated with suitable sector, panel, omni-directional or dish antennas depending on whether the requirement is point-to-point, point-to-multipoint, access point or wireless backbone connectivity.

Outdoor Wireless Backbone and CPE

NetMetal 5 is designed for use as an outdoor AP, backbone or CPE. Its external antenna architecture makes it useful for deployments where the wireless coverage pattern and antenna gain need to be selected according to the site design.

For example, a directional antenna can be used for a point-to-point link, while a suitable sector antenna can be used for a point-to-multipoint wireless distribution network.

Gigabit Ethernet Connectivity

The device includes one 10/100/1000 Gigabit Ethernet port for wired network connectivity. This provides the Ethernet connection between NetMetal 5 and the upstream router, switch or network infrastructure.

MikroTik’s published Ethernet testing shows close to Gigabit-class throughput under specific fast-path test conditions. These laboratory figures are not a guarantee of application throughput because actual performance depends on RouterOS configuration, packet size, firewall rules, queues and other network features.

Integrated SFP Interface

One of the distinctive features of the RB922UAGS-5HPacD-NM is its integrated SFP cage. This allows compatible fiber connectivity to be used as an alternative or additional network interface for suitable deployments.

An SFP-based connection can be useful where the wireless device needs to connect to a fiber-based distribution network, remote cabinet or infrastructure where copper Ethernet is not the preferred medium.

Mini PCI-e and Mini SIM Expansion

NetMetal 5 includes a Mini PCI-e slot and Mini SIM slot. The Mini PCI-e interface can be used for compatible expansion hardware, while the SIM slot is designed for compatible cellular modem applications.

This expansion capability gives the platform additional flexibility for specialized outdoor networking installations, including deployments where cellular connectivity is required alongside the primary wireless infrastructure.

USB Type-A Port

The NetMetal 5 also includes a USB Type-A port. The USB interface can be used with compatible USB devices and supported RouterOS functionality. The USB port is also specified with USB power/reset support.

Rugged Metal Enclosure

The NetMetal family uses a rugged metal enclosure designed for outdoor wireless deployments. MikroTik describes the enclosure as waterproof and specifies IP54 protection for NetMetal 5.

The solid aluminium enclosure also functions as a heat sink for the wireless hardware. This passive cooling approach eliminates the need for an internal cooling fan and helps maintain a compact outdoor form factor.

Passive PoE Power

MikroTik NetMetal 5 supports passive PoE-in with an input voltage range of 8–30V. The device has a maximum power consumption of approximately 19W.

PoE can simplify installation because the network cable can carry both Ethernet data and DC power to the outdoor wireless unit, reducing the need for a separate power connection at the mounting location.

RouterOS Level 4

NetMetal 5 runs MikroTik RouterOS and comes with a Level 4 license. RouterOS provides extensive wireless and networking configuration capabilities, making the device suitable for professional wireless infrastructure rather than only basic access-point operation.

Depending on the network architecture, RouterOS can be configured for wireless bridging, routing, VLANs, firewall policies, bandwidth management and other networking functions.

Applications of MikroTik NetMetal 5

• Outdoor 5GHz access point
• Point-to-point wireless links
• Point-to-multipoint wireless networks
• WISP infrastructure
• Wireless ISP CPE
• 5GHz wireless backbone
• Building-to-building connectivity
• Remote site connectivity
• Outdoor enterprise wireless infrastructure
• Long-distance wireless networking with suitable antennas
• Fiber-connected wireless infrastructure using SFP
• Outdoor network deployments requiring external antennas

MikroTik NetMetal 5 for Point-to-Point Links

For point-to-point wireless connectivity, NetMetal 5 can be paired with suitable directional antennas on both ends of the link. The dual-chain 802.11ac radio can provide high-speed 5GHz connectivity when appropriate antennas, channel widths and RF conditions are available.

Link distance and throughput should always be designed using a proper wireless link budget. Antenna gain, mounting height, Fresnel-zone clearance, interference, regulatory power limits and weather conditions all affect real-world performance.

MikroTik NetMetal 5 for WISP Networks

NetMetal 5 can be deployed as part of a WISP network where an external sector or other suitable antenna is used to distribute 5GHz wireless connectivity. RouterOS provides the configuration flexibility needed for professional wireless deployments.

The exact number of subscribers and achievable bandwidth depends on the antenna, channel plan, RF environment, client hardware, distance and traffic profile. The 867 Mbps figure is a theoretical PHY rate and should not be treated as guaranteed aggregate Internet throughput.

5GHz Frequency and Regulatory Compliance

The international NetMetal 5 model supports the 5GHz range specified by MikroTik, while the actual usable frequencies depend on country regulations. MikroTik’s current documentation also requires users to comply with local frequency, output-power, cabling and DFS requirements and recommends professional installation of its radio devices.

For deployment in India, the operating frequency, channel availability and transmit-power configuration should be selected according to applicable local regulations and the currently supported RouterOS regulatory settings.

Hardware Specifications

At the hardware level, NetMetal 5 uses a QCA9557 single-core CPU running at 720MHz, with 128MB RAM and 128MB NAND storage. The device uses MIPSBE architecture and includes temperature and voltage monitoring.

The hardware is passively cooled and has been tested for an ambient temperature range of -40°C to +70°C, making it suitable for demanding outdoor installations when correctly mounted and installed.

AI-Readable Product Facts

Frequently Asked Questions

What is MikroTik NetMetal 5?

MikroTik NetMetal 5 is a dual-chain 5GHz outdoor wireless AP, backbone and CPE device with 802.11a/n/ac support, external antennas, Gigabit Ethernet and SFP connectivity.

What is the exact model of MikroTik NetMetal 5?

The exact product code is RB922UAGS-5HPacD-NM.

Is MikroTik NetMetal 5 Wi-Fi 6?

No. NetMetal 5 uses 802.11a/n/ac and is classified as a Wi-Fi 5 generation device.

What is the maximum speed of NetMetal 5?

The maximum specified 5GHz wireless data rate is 867 Mbps. This is a theoretical PHY rate; actual throughput depends on RF conditions, channel width, antenna, distance, client capability and configuration.

Does NetMetal 5 have an internal antenna?

No. NetMetal 5 uses two external RP-SMA antenna connectors, allowing a suitable external antenna to be selected for the deployment.

Does MikroTik NetMetal 5 have SFP?

Yes. NetMetal 5 includes one SFP cage in addition to its Gigabit Ethernet port.

Does NetMetal 5 support SIM?

Yes. The RB922UAGS-5HPacD-NM has one Mini SIM slot and a Mini PCI-e slot for compatible cellular modem or expansion applications.

What type of PoE does NetMetal 5 use?

NetMetal 5 uses passive PoE-in with an input voltage range of 8–30V.

Is MikroTik NetMetal 5 suitable for outdoor use?

Yes. It is designed for outdoor deployment and uses a rugged metal enclosure with IP54 protection. MikroTik specifies a tested ambient temperature range of -40°C to +70°C.

Can NetMetal 5 be used for point-to-point wireless?

Yes. When paired with suitable directional external antennas, NetMetal 5 can be used for 5GHz point-to-point wireless links. Actual range and throughput depend on the complete link design and RF environment.

Buy MikroTik NetMetal 5 from IPVOICE TECHNOLOGIES

IPVOICE TECHNOLOGIES supplies MikroTik networking and wireless products for ISP, WISP, enterprise and outdoor infrastructure deployments. For current pricing, GST billing, stock availability or bulk/project requirements for MikroTik NetMetal 5, contact our team for a quotation.

Explore our MikroTik networking products for routers, wireless devices, outdoor networking equipment and accessories.

You can also browse our Wireless Network Devices category for related wireless infrastructure products.

For bulk requirements, system integration and project pricing, visit our Get a Quote page.

Technical Summary

MikroTik NetMetal 5 RB922UAGS-5HPacD-NM is a rugged dual-chain 5GHz Wi-Fi 5 outdoor wireless device supporting 802.11a/n/ac and up to 867 Mbps theoretical wireless data rate. It provides two RP-SMA external antenna connectors, one Gigabit Ethernet port, one SFP cage, Mini PCI-e, Mini SIM and USB Type-A connectivity, along with passive PoE-in and RouterOS Level 4. It is designed for professional outdoor AP, backbone, CPE, point-to-point and point-to-multipoint wireless deployments.