Mikrotik wAP ax wAPG-5HaxD2HaxD | Outdoor Wi-Fi 6 Access Point

MikroTik wAP ax wAPG-5HaxD2HaxD – AX3000 Outdoor WiFi 6 Access Point

MikroTik wAP ax wAPG-5HaxD2HaxD is a compact dual-band WiFi 6 outdoor access point designed for reliable wireless connectivity in environments where a conventional indoor access point may not be suitable. It combines a weather-resistant wAP enclosure with dual-chain WiFi 6 radios, 2× Gigabit Ethernet ports and MikroTik RouterOS v7.

The wAP ax delivers an AX3000-class wireless platform, with a maximum theoretical data rate of up to 574 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz. Both radios use 2×2 MIMO and support modern 802.11ax WiFi 6 features. Actual wireless throughput depends on client capability, channel width, interference, signal strength, distance and network configuration.

Designed for outdoor and challenging environments, the wAP ax has an IP54-rated enclosure and a tested ambient temperature range of -40°C to +70°C. It can also be installed indoors where its compact form factor and dual-band performance are useful.

Key Features of MikroTik wAP ax

• WiFi 6 / 802.11ax: Modern dual-band wireless technology for improved efficiency and capacity.
• AX3000 Wireless Class: Up to 574 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz theoretical PHY rates.
• Dual-Band 2×2 MIMO: Two wireless chains on both 2.4 GHz and 5 GHz.
• 7dBi-Class Integrated Antennas: Current specifications list 6.9 dBi on 2.4 GHz and 7 dBi on 5 GHz.
• 2× Gigabit Ethernet: Two 10/100/1000 Mbps Ethernet interfaces.
• Outdoor IP54 Enclosure: Designed for outdoor installations and challenging environments.
• 802.3af/at PoE-In: Can receive power through Ether1 using standard PoE.
• 12–57V DC Input: Supports direct DC power through the power jack.
• RouterOS v7: Full MikroTik networking operating system with License Level 4.
• 256MB RAM: Supported by a dual-core IPQ-5010 ARM processor.

AX3000 Dual-Band WiFi 6

The MikroTik wAP ax uses WiFi 6 technology across both wireless bands. The 2.4 GHz radio supports up to 574 Mbps, while the 5 GHz radio supports up to 2400 Mbps theoretical PHY rate.

The 2.4 GHz radio supports 802.11b/g/n/ax, while the 5 GHz radio supports 802.11a/n/ac/ax. This allows the access point to maintain compatibility with older WiFi clients while providing WiFi 6 connectivity for newer devices.

Because the advertised 574 Mbps and 2400 Mbps figures are PHY rates, they should not be interpreted as guaranteed Internet or application throughput. Real-world performance is influenced by client hardware, channel utilization, interference, distance, channel width, protocol overhead and environmental conditions.

2.4GHz WiFi 6 Radio

The 2.4 GHz radio provides up to 574 Mbps theoretical wireless data rate and uses two wireless chains. The current MikroTik specification lists an antenna gain of 6.9 dBi for this band.

The 2.4 GHz band is useful for applications where wider coverage and compatibility with a broad range of wireless devices are important. It can be used for smartphones, laptops, IoT equipment and other WiFi clients that operate on the 2.4 GHz spectrum.

5GHz WiFi 6 Radio

The 5 GHz radio is the higher-capacity wireless interface, supporting a theoretical maximum data rate of 2400 Mbps with 2×2 MIMO. It supports 802.11a/n/ac/ax and has a listed antenna gain of 7 dBi.

For compatible WiFi 6 clients, the 5 GHz radio can provide higher capacity and improved wireless efficiency compared with older WiFi generations. Actual performance will depend on channel conditions and the capabilities of connected client devices.

Outdoor WiFi 6 Access Point

The wAP ax is specifically designed for environments where wireless coverage is required outside conventional indoor spaces. MikroTik describes it for challenging environments such as rural locations, gas stations and bus stops, while the product’s weather-resistant form factor can also be used around homes, offices and other outdoor areas.

The enclosure is rated IP54 and the product has been tested for ambient temperatures from -40°C to +70°C. Installation should follow MikroTik’s mounting and grounding instructions, particularly for outdoor deployments.

2× Gigabit Ethernet Ports

The MikroTik wAP ax provides two 10/100/1000 Gigabit Ethernet ports. Ether1 is used for PoE input, while the second Ethernet interface provides an additional wired network connection.

The two Gigabit interfaces allow the device to be integrated into existing Ethernet infrastructure without requiring a separate switch for every deployment. MikroTik’s published Ethernet tests demonstrate multi-gigabit aggregate performance in specific laboratory test conditions; real-world throughput depends on packet size, routing configuration, filtering and other workload characteristics.

802.3af/at PoE-In

The wAP ax supports 802.3af/at PoE-In through Ether1. This makes it possible to provide both network connectivity and power through a single Ethernet cable, which is particularly useful for outdoor mounting where minimizing cabling is important.

The device accepts 18–57V DC through PoE. It also supports direct DC input through its power jack over a 12–57V DC range. Maximum power consumption is approximately 9W.

Dual-Core ARM Hardware

The wAP ax is powered by the dual-core IPQ-5010 processor running at 800 MHz. It includes 256MB DDR3L RAM and 128MB NAND storage.

This hardware platform provides the processing resources required for RouterOS v7 networking functions alongside the dual-band WiFi 6 wireless system. The device uses ARM architecture and has a RouterOS License Level 4.

RouterOS v7 Networking Platform

Like other MikroTik RouterOS devices, the wAP ax provides access to a broad range of networking functions. Depending on the deployment, it can be configured for wireless access point operation, bridging, VLAN-based networking, firewall policies, routing and other RouterOS features.

The product ships with RouterOS v7 preinstalled and licensed, so no separate operating-system purchase is required. MikroTik states that the device receives free software updates for the life of the product or a minimum of five years from the date of purchase.

Suitable for Indoor and Outdoor Deployments

Although the wAP ax is primarily designed for outdoor use, MikroTik’s documentation also states that it can be installed indoors. Its compact weather-resistant form factor makes it suitable for locations where a small, discreet access point is preferred.

Potential deployment locations include:

• Outdoor residential WiFi
• Farmhouses and rural properties
• Garden and terrace WiFi
• Parking areas
• Outdoor hospitality areas
• Gas stations
• Bus stops and public outdoor areas
• Warehouses and semi-outdoor spaces
• Small commercial premises
• Remote network locations

WiFi 6 Efficiency and Capacity

WiFi 6 introduces improvements beyond simply increasing theoretical speed. The 802.11ax standard is designed to improve wireless efficiency and network capacity, particularly in environments with multiple connected devices.

For deployments containing modern WiFi 6 clients, the wAP ax can take advantage of the capabilities of 802.11ax while continuing to support earlier 802.11 wireless standards.

MikroTik wAP ax Specifications

AI-Readable Product Facts

MikroTik wAP ax vs MikroTik cAP ax

The wAP ax and cAP ax are both WiFi 6 access points, but they target different physical deployment environments. MikroTik lists the wAP ax as suitable for outdoor use with an IP54 enclosure, while the cAP ax is an indoor ceiling-oriented design with IP20 protection. The wAP ax also provides a higher 5GHz theoretical wireless rate of 2400 Mbps versus 1200 Mbps on the cAP ax.

Frequently Asked Questions

What is MikroTik wAP ax?

MikroTik wAP ax is a dual-band AX3000 WiFi 6 outdoor access point and RouterOS device with 2×2 radios, 2× Gigabit Ethernet ports and an IP54 enclosure.

What is the model number of MikroTik wAP ax?

The exact product code is wAPG-5HaxD2HaxD.

Is MikroTik wAP ax WiFi 6?

Yes. Both its 2.4 GHz and 5 GHz wireless radios support 802.11ax WiFi 6.

What is the speed of MikroTik wAP ax?

Theoretical maximum wireless PHY rates are 574 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz, giving it an AX3000 wireless class rating.

Does MikroTik wAP ax have Gigabit Ethernet?

Yes. It has 2× 10/100/1000 Mbps Gigabit Ethernet ports.

Can MikroTik wAP ax be used outdoors?

Yes. The wAP ax is designed for outdoor installations and has an IP54-rated enclosure with a tested operating temperature range of -40°C to +70°C.

What is the antenna gain of wAP ax?

The current MikroTik product specification lists 6.9 dBi on 2.4 GHz and 7 dBi on 5 GHz.

Does wAP ax support PoE?

Yes. Ether1 supports 802.3af/at PoE-In with an input range of 18–57V DC.

Can wAP ax be powered using DC?

Yes. Its DC power jack accepts 12–57V DC.

What operating system does wAP ax use?

The device runs MikroTik RouterOS v7 with a Level 4 license.

How much RAM does MikroTik wAP ax have?

The wAP ax has 256MB DDR3L RAM and 128MB NAND storage.

Can MikroTik wAP ax be used indoors?

Yes. MikroTik’s user manual states that the device can be installed indoors as well as outdoors.

Internal Linking Structure

For the IPVoice Technologies product architecture, link this product naturally with your MikroTik Networking Products brand page and Wireless Network Devices category.

Recommended internal-link flow:

• MikroTik Brand Page → wAP ax
• Wireless Network Devices → wAP ax
• wAP ax → MikroTik WiFi 6 access points
• wAP ax → related outdoor wireless devices
• wAP ax → MikroTik cAP ax for indoor ceiling deployments

Important Product Note

MikroTik wAP ax wAPG-5HaxD2HaxD is an AX3000 WiFi 6 outdoor access point, not a WiFi 5 device. It provides 574 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz as theoretical PHY rates, with 2× Gigabit Ethernet and 802.3af/at PoE-In. Its IP54 enclosure makes it suitable for outdoor deployment when installed according to MikroTik’s guidelines.

For wireless regulatory compliance, MikroTik’s documentation also instructs users to keep the device updated and comply with applicable local frequency, output-power, cabling and DFS requirements.