The Tenda O1 300Mbps Outdoor Wireless CPE is a 2.4GHz outdoor networking device featuring an integrated 8dBi directional antenna and an IP65-rated enclosure. Designed for wireless point-to-point (PtP) and point-to-multipoint (PtMP) applications, it supports wireless links of up to 500m+ under suitable conditions. With AP, Station and WISP modes, a 10/100Mbps Ethernet port, passive PoE and transparent bridge support, the Tenda O1 is suitable for CCTV connectivity, building-to-building links and WISP network deployments.
Original price was: ₹4,000.000.₹2,299.000Current price is: ₹2,299.000.
In stock
In stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
The Tenda O1 is a 2.4GHz outdoor wireless CPE designed for long-distance wireless connectivity, CCTV surveillance, internet distribution and professional networking applications. With wireless speeds of up to 300Mbps, an integrated 8dBi directional antenna and an IP65-rated enclosure, the Tenda O1 provides a practical solution for outdoor wireless links where installing Ethernet or fiber cabling may be difficult or expensive.
Designed for point-to-point (PtP) and point-to-multipoint (PtMP) wireless networking, the Tenda O1 300Mbps Outdoor CPE supports AP, Station and WISP operating modes. Its outdoor-ready design, passive PoE power option and wireless bridge capabilities make it suitable for CCTV networks, remote buildings, small businesses, warehouses and wireless internet service providers.
The Tenda O1 operates on the 2.4GHz frequency band and supports IEEE 802.11b/g/n wireless standards, with a maximum wireless data rate of 300Mbps. This provides connectivity for compatible networking equipment and applications such as IP surveillance, network access and data transmission.
The actual throughput depends on wireless interference, signal strength, installation conditions, distance and the capabilities of connected devices. The 300Mbps figure represents the maximum wireless link rate rather than guaranteed internet speed.
The Tenda O1 Outdoor Wireless CPE features an integrated 8dBi directional antenna designed to focus wireless coverage in a specific direction. Directional transmission can help establish a more effective wireless connection between appropriately positioned devices.
Tenda specifies a wireless transmission range of 500m+ under suitable conditions. For the best results, install the devices with a clear line of sight wherever possible and carefully align the antennas. Environmental obstacles, interference and mounting position can affect the achievable range and throughput.
The Tenda O1 features an IP65-rated enclosure designed to protect the device against dust and water jets under the conditions defined by the IP rating. This makes it suitable for outdoor installations when mounted and installed according to the manufacturer’s instructions.
The enclosure is designed for outdoor networking environments, including building exteriors, CCTV installations, farms, warehouses and other locations that require wireless connectivity beyond indoor spaces.
The Tenda O1 supports wireless networking configurations for point-to-point and point-to-multipoint applications. Two suitably configured units can be used to establish a wireless bridge between separate locations, while compatible network arrangements can support broader wireless distribution requirements.
Typical deployment scenarios include:
The Tenda O1 offers multiple operating modes to support different wireless networking requirements.
Select the appropriate mode according to the network topology and the configuration of the other wireless equipment.
The Tenda O1 supports passive Power over Ethernet (PoE), allowing power and network connectivity to be carried over a compatible Ethernet cable. This helps simplify installation when the outdoor device is mounted on a wall or pole away from a convenient power outlet.
The manufacturer specifies a 9V 0.6A passive PoE power method and a compatible DC power input. Use the supplied power adapter and PoE injector, and verify the correct voltage and pinout before connecting any alternative power equipment.
The Tenda O1 includes one 10/100Mbps Ethernet port for wired network connectivity and PoE/LAN connection. It can connect to compatible switches, routers, CCTV network equipment and other Ethernet devices according to the selected installation mode.
Although the wireless link rate is specified at up to 300Mbps, the Ethernet interface operates at a maximum nominal link rate of 100Mbps. Actual wired throughput will be lower than or equal to the interface’s practical capacity, so this limitation should be considered when planning bandwidth-intensive deployments.
The Tenda O1 supports transparent bridging and VLAN tagging for SSIDs, helping integrate suitable wireless links into existing network infrastructure. Other supported features include wireless client isolation, SSID isolation, wireless access control, adjustable transmission power and network diagnostic tools.
Remote web management and the Tenda CPE Assistant software can help administrators configure and maintain compatible deployments. Available functions depend on the installed firmware and network configuration.
| Specification | Details |
|---|---|
| Brand | Tenda |
| Model | O1 |
| Product Type | Outdoor Wireless CPE |
| Frequency Band | 2.4GHz |
| Wireless Standard | IEEE 802.11b/g/n |
| Maximum Wireless Rate | 300Mbps |
| Antenna | Integrated Directional Antenna |
| Antenna Gain | 8dBi |
| Antenna Polarization | Dual Polarization |
| Antenna Beamwidth | 60° Horizontal / 60° Vertical |
| Rated Wireless Range | 500m+ under suitable conditions |
| Ethernet Interface | 1 × 10/100Mbps Ethernet Port |
| Outdoor Protection | IP65 |
| Operating Modes | AP / Station / WISP |
| Power Supply | 9V 0.6A Passive PoE or DC |
| Power Consumption | 2.6W |
| Installation | Pole Mount / Wall Mount |
| Operating Temperature | -30°C to 55°C |
| Dimensions | 193.5 × 80 × 67.5mm |
Looking to buy the Tenda O1 300Mbps Outdoor Wireless CPE in India? IPVoice Technologies supplies networking products for businesses, system integrators, CCTV installers and wireless internet service providers.
The Tenda O1 is a suitable option for outdoor wireless links, remote surveillance connectivity and network extension projects that require a directional 2.4GHz wireless device. Before ordering, consider the 10/100Mbps Ethernet limitation, the required link distance and the availability of a clear line of sight.
Choose the Tenda O1 Outdoor CPE for a practical wireless connectivity solution for compatible outdoor networking applications.
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account In stock
Reviews
Clear filtersThere are no reviews yet.