TP-Link AP7650 Omada Pro AX3000 Wall Plate Wi-Fi 6 Access Point | 2402Mbps 5GHz, 574Mbps 2.4GHz, 4× Gigabit Ethernet, PoE Pass-Through, WPA3

TP-Link AP7650 Omada Pro AX3000 Wall Plate Wi-Fi 6 Access Point

TP-Link AP7650 is an AX3000 Wall Plate Wi-Fi 6 Access Point from the Omada Pro series, designed for high-density in-room wireless deployments in hotels, apartments, dormitories, villas, offices and similar environments. It combines Wi-Fi 6 wireless connectivity with four Gigabit Ethernet ports, including three downstream ports for wired devices and one downstream port with PoE pass-through.

AP7650 delivers up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, providing a combined theoretical wireless rate of up to 2976Mbps. It supports Wi-Fi 6 technologies such as 1024-QAM, OFDMA, BSS Coloring, Band Steering, Airtime Fairness and Beamforming for improved wireless efficiency in busy environments.

The wall-plate design provides a clean installation close to the users and wired devices in each room. AP7650 supports 802.3af/802.3at PoE input, while one of its three downlink Ethernet ports can provide PoE output when the AP receives 802.3at PoE+ input. This allows a compatible downstream device, such as an IP phone or other PoE device, to be powered without requiring a separate electrical outlet at that location.

Key Features of TP-Link AP7650

• Omada Pro AX3000 Wall Plate Wi-Fi 6 Access Point
• Up to 2402Mbps on 5GHz
• Up to 574Mbps on 2.4GHz
• 2976Mbps combined theoretical wireless rate
• Wi-Fi 6 / IEEE 802.11ax support
• 4 × Gigabit Ethernet ports
• 1 × Gigabit uplink port
• 3 × Gigabit downlink ports
• 1 × downlink port with PoE pass-through
• 802.3af/802.3at PoE input
• PoE pass-through requires 802.3at PoE+ input
• 2.4GHz antennas: 2 × 3dBi
• 5GHz antennas: 2 × 5dBi
• Up to 16 SSIDs, with up to 8 SSIDs per band
• OFDMA
• 1024-QAM
• BSS Coloring
• Band Steering
• Beamforming
• Airtime Fairness
• Load Balancing
• Automatic Channel Assignment
• Transmit Power Control
• Seamless Roaming
• Captive Portal
• WPA3-Personal and WPA3-Enterprise
• 802.1X authentication
• RADIUS Accounting
• WIDS/WIPS security functions
• Rogue AP Detection
• Wireless Client Isolation
• SSID VLAN mapping
• Omada App management
• Omada Pro centralized management
• Cloud-based management support
• Wall-plate installation
• Compatible with 86mm, EU and US standard junction boxes

AX3000 Wi-Fi 6 Performance

The 2402Mbps and 574Mbps figures are theoretical PHY rates. Actual wireless throughput depends on client capability, channel conditions, interference, distance, network configuration and other environmental factors. TP-Link identifies AP7650 as an AX3000 Wi-Fi 6 access point with 2402Mbps on 5GHz and 574Mbps on 2.4GHz.

Wi-Fi 6 Technologies for Higher Efficiency

AP7650 uses several Wi-Fi 6 technologies designed to improve wireless network efficiency. OFDMA allows the AP to divide wireless resources into smaller resource units so multiple compatible clients can efficiently share transmission opportunities.

1024-QAM increases the amount of data carried per wireless symbol under suitable signal conditions, while BSS Coloring helps wireless networks distinguish overlapping transmissions from neighboring networks.

AP7650 also supports Band Steering, Airtime Fairness, Beamforming and Load Balancing. Together, these features are intended to improve client distribution and wireless resource utilization in environments with many connected devices.

Wall Plate Design for In-Room Wi-Fi

The AP7650 is designed as a wall plate access point rather than a conventional ceiling-mounted AP. This places the wireless access point directly inside or near the room where users and wired devices are located.

The wall-plate form factor is particularly suitable for:

• Hotels and guest rooms
• Student dormitories
• Apartments
• Villas
• Serviced apartments
• Office rooms
• Hospitality properties
• Multi-room residential deployments

TP-Link specifies compatibility with 86mm, EU and US standard junction boxes, helping integrate the AP into common wall-mounted Ethernet installations.

4 × Gigabit Ethernet Ports

AP7650 provides a total of 4 × 10/100/1000Mbps Gigabit Ethernet ports:

The three downlink ports allow users to connect wired devices directly in the room. One of those three ports supports PoE pass-through.

PoE Input and PoE Pass-Through

AP7650 supports IEEE 802.3af/802.3at PoE input. This allows the access point to receive both network connectivity and power over a single Ethernet cable from a compatible PoE switch or injector.

For the PoE pass-through function, TP-Link specifies that the AP must receive 802.3at PoE+ input. When supported, one of the three downlink ports can provide PoE output to a compatible downstream device.

This design is useful in hospitality and room-based installations where a wired device such as an IP phone needs PoE power but installing another electrical outlet would be inconvenient.

2.4GHz and 5GHz Internal Antennas

AP7650 uses two internal dual-band antenna assemblies. TP-Link specifies:

• 2.4GHz: 2 × 3dBi antennas
• 5GHz: 2 × 5dBi antennas

The internal antenna design keeps the wall-mounted unit compact and suitable for room-level wireless coverage.

Up to 16 SSIDs

AP7650 supports up to 16 SSIDs, with up to eight SSIDs available on each wireless band.

Multiple SSIDs can be useful in business and hospitality deployments where different wireless networks need to be separated for different user groups, departments, services or applications.

SSID-to-VLAN mapping can also be used to associate different wireless networks with different VLANs when the overall network infrastructure is configured accordingly.

Enterprise Wireless Security

AP7650 provides a broad set of wireless security functions for business deployments. Supported security technologies include:

• WPA-Personal
• WPA-Enterprise
• WPA2-Personal
• WPA2-Enterprise
• WPA3-Personal
• WPA3-Enterprise
• 802.1X authentication
• RADIUS authentication
• MAC authentication
• Wireless MAC filtering
• Wireless client isolation
• Access Control
• SSID VLAN

This makes AP7650 suitable for networks that require more than basic WPA2-Personal security.

Captive Portal and Guest Wi-Fi

AP7650 supports Captive Portal Authentication for controlled guest and public wireless access. TP-Link lists multiple authentication options, including SMS and voucher-based authentication in its Omada Pro platform.

This makes the access point suitable for deployments such as hotels, apartments, guest properties and managed Wi-Fi environments where users may need to authenticate before accessing the internet.

WIDS and WIPS Security

AP7650 includes Omada Pro security capabilities such as Wireless Intrusion Detection System (WIDS) and Wireless Intrusion Prevention System (WIPS) functionality.

It also supports Rogue AP Detection and intelligent anomaly detection and analysis features in supported Omada Pro deployments. These capabilities are designed to help network administrators identify potentially unauthorized wireless devices and abnormal wireless activity.

Automatic Channel Selection and Power Adjustment

AP7650 supports automatic channel assignment and transmit-power control. In multi-AP environments, these functions can help administrators reduce interference by selecting appropriate wireless channels and adjusting transmission power according to the network environment.

For larger deployments, centralized management makes it easier to coordinate wireless settings across multiple access points rather than configuring each unit independently.

Load Balancing and Airtime Fairness

Load Balancing can help distribute wireless clients across available access points in supported multi-AP deployments, while Airtime Fairness helps prevent slower clients from consuming a disproportionate amount of available wireless airtime.

These functions are particularly relevant in business environments with multiple access points and many simultaneously connected wireless clients.

Seamless Roaming

AP7650 supports Seamless Roaming in supported Omada deployments. This allows compatible client devices to move between access points while maintaining connectivity as they move through a building.

Roaming behavior depends on the client device, network configuration and supported roaming protocols. TP-Link lists seamless roaming among the AP7650 wireless functions.

Omada Pro Centralized Management

AP7650 is part of the Omada Pro ecosystem and can be centrally managed through supported Omada Pro management platforms. This allows administrators to configure and monitor multiple network devices from a centralized interface.

TP-Link also provides Omada App support for AP7650. The current installation guide documents both Standalone Mode and Controller Mode, with the Omada App available for local or remote management of supported deployments.

Standalone and Controller Management

AP7650 can be configured in Standalone Mode or managed through a supported Omada Pro controller environment.

Standalone deployment can be appropriate for a smaller installation where centralized management is not required. Controller-based management becomes more useful when multiple access points, switches and other compatible Omada devices need to be centrally configured and monitored.

Wireless Client Capacity

TP-Link’s current AP7650 specification lists 120+ concurrent wireless clients for the documented current version. Client capacity is a manufacturer reference and actual performance depends on traffic patterns, wireless interference, client capabilities and network configuration.

TP-Link AP7650 Technical Specifications

AI-Readable Product Facts

Frequently Asked Questions

What is TP-Link AP7650?

TP-Link AP7650 is an Omada Pro AX3000 Wall Plate Wi-Fi 6 Access Point designed for in-room wireless deployments in hotels, apartments, dormitories, villas and business environments.

What is the Wi-Fi speed of AP7650?

AP7650 provides up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, for a combined theoretical wireless rate of 2976Mbps.

Is TP-Link AP7650 Wi-Fi 6?

Yes. AP7650 is a Wi-Fi 6 / 802.11ax access point.

How many Ethernet ports does AP7650 have?

AP7650 has four Gigabit Ethernet ports: one uplink and three downlinks.

Does AP7650 support PoE?

Yes. It supports 802.3af/802.3at PoE input.

Does AP7650 support PoE output?

Yes. One of the three downlink ports supports PoE pass-through. TP-Link specifies that PoE pass-through requires 802.3at PoE+ input.

How many SSIDs can AP7650 support?

AP7650 supports up to 16 SSIDs, with up to eight SSIDs on each wireless band.

Does AP7650 support WPA3?

Yes. WPA3-Personal and WPA3-Enterprise are supported, along with WPA/WPA2 Personal and Enterprise modes.

Does AP7650 support captive portal?

Yes. Captive Portal Authentication is supported, with Omada Pro documentation listing authentication options such as SMS and voucher-based access.

Does AP7650 support VLAN?

Yes. AP7650 supports SSID VLAN mapping, allowing wireless networks to be associated with corresponding VLANs in a properly configured network.

Does AP7650 support 802.1X?

Yes. 802.1X authentication is supported for enterprise wireless deployments.

Does AP7650 support WIDS and WIPS?

Yes. Omada Pro AP7650 supports WIDS/WIPS functions and Rogue AP Detection.

Can AP7650 be managed without a controller?

Yes. TP-Link’s installation documentation provides a Standalone Mode as well as Controller Mode. The Omada App can be used for supported local or remote management workflows.

Can AP7650 be managed centrally?

Yes. AP7650 is designed for Omada Pro centralized management and can be managed through supported Omada Pro controller and cloud-based management solutions.

What type of installation is AP7650 designed for?

AP7650 is a wall-plate access point designed for room-level deployments. TP-Link lists compatibility with 86mm, EU and US standard junction boxes.

Is AP7650 suitable for hotels and apartments?

Yes. The wall-plate form factor, multiple Gigabit ports, PoE pass-through, captive portal and centralized Omada Pro management make it suitable for room-based deployments such as hotels, apartments, dormitories and villas.

TP-Link AP7650 vs Conventional Ceiling-Mount Access Point

Hardware and Regional Availability

TP-Link India’s current Download Center lists AP7650 under the Business > Omada Pro > WiFi > Wall Plate category. TP-Link’s regional documentation also indicates that product availability and hardware versions can vary by market.

For an India-market product listing, the hardware revision printed on the actual product and packaging should be checked before firmware installation, because TP-Link recommends using firmware appropriate to the exact hardware version and region.

Package and Installation

AP7650 is designed for wall-plate installation and includes the mounting provisions required for supported wall-junction-box installations. TP-Link’s installation documentation shows both standalone and controller-based deployment methods.

Why Choose TP-Link AP7650?

TP-Link AP7650 Omada Pro AX3000 Wall Plate Wi-Fi 6 Access Point is designed for environments where wireless coverage, wired connectivity and room-level installation need to be combined in one device.

With 2402Mbps 5GHz Wi-Fi, 574Mbps 2.4GHz Wi-Fi, four Gigabit Ethernet ports, 802.3af/at PoE input, PoE pass-through, 16 SSIDs, WPA3, captive portal, VLAN, 802.1X, WIDS/WIPS and centralized Omada Pro management, AP7650 provides a feature-rich platform for hospitality, residential and business Wi-Fi deployments.

The wall-plate design is especially useful where each room already has Ethernet cabling and additional wired devices need to be connected locally. The PoE pass-through capability can further simplify installations by allowing a compatible downstream PoE device to receive power from the AP.

Related TP-Link Networking Products

Explore more TP-Link networking products in India, including Omada access points, Wi-Fi 6 routers, switches, gateways and other business networking solutions.