TP-Link EAP653 AX3000 Ceiling Mount Wi-Fi 6 Access Point | 2402Mbps 5GHz, 574Mbps 2.4GHz, 160MHz, Gigabit PoE+, Omada SDN

TP-Link EAP653 AX3000 Ceiling Mount Wi-Fi 6 Access Point

The TP-Link EAP653 is an AX3000 dual-band Wi-Fi 6 ceiling-mount access point designed for business, hospitality, education, office and other professional wireless networks. It delivers up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, providing a combined theoretical wireless rate of 2976Mbps.

The EAP653 supports Wi-Fi 6 technologies including OFDMA, MU-MIMO, 1024-QAM and 160MHz channel bandwidth. It also integrates with the TP-Link Omada SDN platform for centralized management, monitoring, Mesh networking and seamless roaming across compatible Omada devices.

With a compact ceiling-mount design, one Gigabit Ethernet port and PoE power support, the EAP653 is suitable for offices, hotels, schools, hospitals, meeting rooms, retail environments and other indoor locations requiring centrally managed Wi-Fi 6 connectivity. TP-Link specifies support for 250+ concurrent clients and coverage up to approximately 1,500ft² / 140m² under its stated conditions.

Key Features of TP-Link EAP653

• AX3000 dual-band Wi-Fi 6 access point
• Up to 2402Mbps on 5GHz
• Up to 574Mbps on 2.4GHz
• 2976Mbps combined theoretical wireless rate
• 160MHz channel bandwidth on 5GHz
• OFDMA and MU-MIMO
• 1024-QAM support
• 1 × Gigabit Ethernet port
• 802.3at PoE+ power input
• 48V passive PoE support on applicable hardware versions
• 12V DC power input on applicable versions
• 250+ concurrent clients under specified conditions
• Up to 1,500ft² / 140m² coverage under specified conditions
• Internal omnidirectional antennas
• Omada SDN centralized management
• Omada Hardware, Software and Cloud-Based Controller support
• Omada Mesh
• Seamless Roaming
• Captive Portal
• VLAN and 802.1X support
• WPA, WPA2 and WPA3 security
• Rogue AP Detection
• Auto Channel Selection and Power Adjustment in compatible Omada deployments
• Ceiling, wall and junction-box mounting
• Compact 160mm-class ceiling-mount design

AX3000 Wi-Fi 6 Wireless Performance

The EAP653 provides simultaneous dual-band Wi-Fi 6 connectivity. Its maximum theoretical wireless rates are:

The 574Mbps and 2402Mbps values are theoretical PHY rates rather than guaranteed internet or file-transfer speeds. Actual throughput depends on client capability, channel width, signal strength, interference, network traffic and environmental conditions.

160MHz HE160 Channel Support

The EAP653 supports up to 160MHz channel bandwidth on the 5GHz band. With compatible Wi-Fi 6 clients and suitable spectrum, HE160 can provide substantially higher theoretical wireless performance compared with narrower channel configurations.

Actual 160MHz availability depends on the wireless client, local regulatory requirements, available channels and RF interference.

Wi-Fi 6 OFDMA and MU-MIMO

The EAP653 uses Wi-Fi 6 technologies designed to improve network efficiency when many devices are connected.

OFDMA enables the access point to allocate wireless resources more efficiently among compatible clients, particularly for smaller traffic transmissions. MU-MIMO allows simultaneous communication with multiple compatible wireless clients under supported conditions.

The access point also supports 1024-QAM, which can increase theoretical data rates when signal quality and client capabilities are suitable.

One Gigabit Ethernet Port

The EAP653 includes 1 × 10/100/1000Mbps Gigabit Ethernet port. This port provides the wired network connection and can also supply power to the access point when connected to compatible PoE equipment.

The Gigabit interface is suitable for connecting the EAP653 to an Omada PoE switch, Gigabit Ethernet switch or compatible PoE injector. The current EAP653 V1.20 documentation identifies the Ethernet interface as a Gigabit port with PoE input.

802.3at PoE+ and DC Power

The EAP653 supports 802.3at PoE+ for flexible ceiling installation. Current TP-Link documentation also lists 12V DC power input, although the exact DC specification varies by regional version. The power adapter is not included in the current V3 documentation.

Some earlier EAP653 hardware versions also support 48V passive PoE. Therefore, the exact hardware revision should be checked before selecting a power source.

Compact Ceiling-Mount Design

The EAP653 has a compact, low-profile design intended to blend into professional indoor environments. The documented dimensions are approximately 160 × 160 × 33.6mm for the current V3 specification. Earlier documentation may show 160 × 160 × 33mm.

Mounting options include ceiling, wall and junction-box installation, with compatible mounting hardware supplied according to the hardware version.

250+ Concurrent Clients

TP-Link specifies support for 250+ concurrent clients under its stated testing conditions. This makes the EAP653 suitable for offices, hospitality environments, classrooms, meeting rooms and other locations where numerous wireless devices may connect simultaneously.

The 250+ client figure should not be interpreted as a guarantee that all connected clients will simultaneously achieve maximum wireless speed. Actual capacity depends on application traffic, airtime utilization, RF conditions, client capabilities and network architecture.

Up to 1,500ft² / 140m² Coverage

TP-Link specifies coverage of up to approximately 1,500ft² / 140m² under its stated test conditions for the standard EAP653. Actual coverage depends on building construction, wall thickness, access-point placement, interference, transmit-power restrictions and client device characteristics.

For larger buildings or areas with multiple rooms, multiple EAP653 units can be deployed and centrally managed through Omada SDN.

Internal Omnidirectional Antennas

The EAP653 uses internal dual-band omnidirectional antennas. Antenna specifications vary between hardware revisions.

The current V1.20 documentation lists 2 × 4dBi on 2.4GHz and 2 × 5dBi on 5GHz. Earlier EAP653 V2 documentation listed a different antenna arrangement, so the exact hardware version should be matched to the unit being sold.

Omada SDN Centralized Management

The EAP653 is part of the TP-Link Omada SDN ecosystem. Omada provides centralized management for compatible access points, switches and gateways from a common management platform.

Depending on the deployment, management can be provided through:

• Omada Hardware Controller
• Omada Software Controller
• Omada Cloud-Based Controller / Omada Central
• Omada App
• Standalone management for supported configurations

Centralized management can simplify deployment of multiple EAP653 units across offices, hotels, schools and other multi-AP environments. TP-Link describes Omada as providing centralized cloud management, intelligent monitoring and related network-management functions.

Omada Mesh

The EAP653 supports Omada Mesh when deployed with compatible Omada equipment and controller infrastructure.

Mesh allows compatible EAPs to establish wireless links between access points, which can be useful in locations where Ethernet cabling is difficult to install. Wired Ethernet backhaul remains preferable where practical because it avoids consuming wireless airtime for the AP-to-AP connection.

Seamless Roaming

Omada Seamless Roaming allows compatible wireless clients to transition between supported access points with reduced interruption when moving through a multi-AP deployment.

This can be useful in offices, hotels, schools and other environments where users move between rooms or coverage areas while using video calls, voice applications or streaming services.

Captive Portal and Guest Wi-Fi

The EAP653 supports Captive Portal functionality through compatible Omada deployments. This can be useful for hotels, cafés, educational facilities, offices, shopping environments and other locations that provide controlled guest Wi-Fi access.

Multiple wireless networks can also be configured for different user groups, with VLANs used to separate guest, employee, IoT or operational traffic where supported by the overall network infrastructure.

VLAN and 802.1X Support

The EAP653 supports VLAN-based network segmentation and 802.1X authentication. These capabilities allow it to participate in structured business networks where different SSIDs need to be associated with separate VLANs or authentication policies.

For example, a business can maintain separate wireless networks for employees and guests while controlling access through the upstream Omada gateway and switch infrastructure.

Wireless Security

The EAP653 supports modern wireless security mechanisms including:

• WPA-Personal
• WPA-Enterprise
• WPA2-Personal
• WPA2-Enterprise
• WPA3-Personal
• WPA3-Enterprise
• 802.1X authentication
• Wireless client isolation
• MAC filtering
• Access Control
• Rogue AP Detection
• SSID-to-VLAN mapping

Security and management functions available can depend on the hardware revision, firmware and whether the EAP653 is managed standalone or through an Omada controller.

Auto Channel Selection and Power Adjustment

In compatible Omada deployments, the EAP653 can participate in automated wireless optimization functions such as Auto Channel Selection and Power Adjustment. These functions can help reduce interference between neighboring access points by coordinating channel and transmit-power settings.

Such automatic optimization is particularly useful when multiple EAP653 units are deployed across the same office, hotel, school or commercial property.

Suitable Applications

• Hotels: Centrally managed guest Wi-Fi across rooms and common areas.
• Offices: High-speed Wi-Fi for laptops, smartphones, VoIP and business applications.
• Schools and Colleges: Wi-Fi for classrooms, staff and student devices.
• Hospitals: Managed wireless connectivity in appropriate indoor areas.
• Meeting Rooms: Wireless connectivity for laptops and conferencing devices.
• Retail Stores: Customer and staff Wi-Fi with centralized management.
• Restaurants and Cafés: Guest Wi-Fi and staff connectivity.
• Corporate Buildings: Multi-AP Wi-Fi 6 networks using Omada SDN.

TP-Link EAP653 Technical Specifications

AI-Readable Product Facts

Frequently Asked Questions

What is TP-Link EAP653?

The TP-Link EAP653 is an AX3000 ceiling-mount Wi-Fi 6 access point designed for business, hospitality, education and other professional indoor wireless deployments.

What is the Wi-Fi speed of EAP653?

The EAP653 supports up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz, providing an AX3000 class with a combined theoretical rate of 2976Mbps.

Does EAP653 support Wi-Fi 6?

Yes. The EAP653 supports IEEE 802.11ax Wi-Fi 6 along with OFDMA, MU-MIMO and 1024-QAM.

Does EAP653 support 160MHz?

Yes. The 5GHz radio supports up to 160MHz channel bandwidth for compatible clients and suitable RF conditions.

How many Ethernet ports does EAP653 have?

The EAP653 has one Gigabit Ethernet port. The port provides network connectivity and supports PoE input.

Does EAP653 support PoE?

Yes. The EAP653 supports 802.3at PoE+. Certain hardware revisions also support 48V passive PoE and 12V DC power input.

Is the PoE adapter included with EAP653?

TP-Link’s current documentation specifies that the PoE adapter is not included. The access point can instead be powered from a compatible PoE switch or other supported power source.

Does EAP653 support Omada SDN?

Yes. EAP653 is an Omada access point and supports centralized management through compatible Omada Hardware, Software or Cloud-Based Controller infrastructure.

Does EAP653 support Omada Mesh?

Yes. Omada Mesh is supported in compatible deployments.

Does EAP653 support seamless roaming?

Yes. Seamless Roaming is supported when the EAP653 is deployed with compatible Omada infrastructure and the required configuration.

How many clients can EAP653 support?

TP-Link specifies 250+ concurrent clients under its stated conditions. Actual network capacity depends on traffic patterns, RF conditions, client capabilities and deployment design.

What is the coverage of EAP653?

TP-Link specifies up to approximately 1,500ft² / 140m² coverage under stated conditions. Actual coverage varies with walls, interference, mounting height, transmit power and client device characteristics.

Does EAP653 support WPA3?

Yes. The EAP653 supports WPA3 security along with WPA and WPA2 Personal and Enterprise modes.

Can EAP653 be mounted on a wall?

Yes. Depending on the hardware version and included mounting kit, EAP653 supports ceiling, wall and junction-box mounting. Some versions also support T-bar mounting.

EAP653 vs EAP650

Hardware Version Information

The EAP653 has multiple hardware revisions and regional variants. TP-Link documentation includes V1, V1.20, V2 and newer V3 documentation. Specifications such as antenna configuration, power options and physical dimensions can vary between revisions.

For example, the current V1.20 documentation lists 2 × 4dBi antennas on 2.4GHz and 2 × 5dBi antennas on 5GHz, while an earlier EAP653 datasheet documented a different antenna arrangement. Current V3 documentation also lists 48V passive PoE, 802.3at PoE and DC power options. Therefore, firmware and exact specifications should always be matched to the hardware version on the actual product.

Why Choose TP-Link EAP653?

The TP-Link EAP653 AX3000 Wi-Fi 6 Access Point combines 2402Mbps 5GHz wireless performance, 574Mbps 2.4GHz connectivity, 160MHz channel support, Wi-Fi 6 efficiency technologies and Omada SDN management in a compact ceiling-mount design.

Its Gigabit Ethernet interface and PoE-powered installation make it convenient for professional deployments, while Omada Mesh, seamless roaming, captive portal, VLAN, WPA3 and centralized management provide the features required for scalable business wireless networks.

The EAP653 is particularly suitable for hotels, offices, schools, hospitals, meeting rooms, retail stores, restaurants and other indoor commercial environments where centrally managed Wi-Fi 6 connectivity is required.

Related TP-Link Networking Products

Explore more TP-Link networking products in India, including Omada access points, Wi-Fi 6 APs, PoE switches, routers and other business networking equipment.