Ubiquiti PoE Injector POE-24-12W

Reliable 24V Power with Ubiquiti PoE Injector POE-24-12W

The Ubiquiti PoE Injector POE-24-12W is a compact and reliable Power over Ethernet injector designed to power compatible Ubiquiti devices such as airMAX, UniFi, and other 24V passive PoE equipment. Engineered for stability and simplicity, the Ubiquiti PoE Injector POE-24-12W delivers 24V DC at 0.5A, with a maximum power output of 12 watts — ideal for low-power wireless devices and CPE units.

Whether you’re setting up an outdoor access point or powering a remote radio, this injector ensures safe and consistent voltage delivery across Ethernet cabling, reducing the need for extra power outlets and simplifying your network installation.

Key Features of Ubiquiti PoE Injector POE-24-12W

• 24V DC passive PoE output at 0.5A (12W)
• Compatible with Ubiquiti airMAX, UniFi, and 24V passive PoE devices
• 2 x 10/100/1000 Mbps Ethernet ports (Data In and PoE Out)
• Compact wall-plug design with IEC power input
• Integrated surge protection and clamping
• High power efficiency and low ripple voltage
• Ideal for powering access points, CPE radios, and bridges
• Operating temperature: 0°C to 40°C

Efficient Power Delivery

The Ubiquiti PoE Injector POE-24-12W provides reliable and regulated 24V DC output via Ethernet cable, making it ideal for single-device installations. It supports Gigabit speeds, ensuring no bottleneck in network performance while delivering power at the same time.

The unit operates silently and efficiently, consuming minimal power and generating low heat. Its built-in protection circuits help prevent electrical surges and damage to connected devices.

Simplified Network Setup

With its compact wall-mount design, the Ubiquiti PoE Injector POE-24-12W can be plugged directly into a standard AC socket and connected between your switch/router and the powered device. No configuration is needed — just plug and play.

It helps reduce cable clutter by removing the need for separate power lines to devices like outdoor CPEs or access points, especially in locations where direct power access is unavailable.

Compatible Devices

• airMAX Nanostation and NanoBeam series
• UniFi UAP-AC-Lite and UAP-AC-LR (24V versions)
• LiteBeam and PowerBeam devices
• Other Ubiquiti 24V passive PoE-enabled equipment

Built-In Protection

The Ubiquiti PoE Injector POE-24-12W is equipped with surge protection and clamping diodes to safeguard your networking devices against electrostatic discharge (ESD) and voltage spikes. This makes it suitable for both indoor and protected outdoor environments.

It also includes overload, overvoltage, and short-circuit protection, ensuring reliable long-term operation for your critical networking gear.

Installation and Usage

• Plug the injector into a power outlet using the included AC power cord
• Connect your router or switch to the Data In Ethernet port
• Connect your PoE device to the PoE Out port using standard Cat5e/Cat6 cable
• The device powers on and provides both data and 24V power to the remote unit

Conclusion

The Ubiquiti PoE Injector POE-24-12W is a dependable and efficient solution for powering 24V passive PoE devices. Its compact form, built-in surge protection, and plug-and-play simplicity make it perfect for small-scale deployments, remote wireless setups, and quick installations. Whether you’re extending your wireless network or powering a remote CPE, this injector gets the job done with confidence and reliability.