Ubiquiti U6-Enterprise WiFi 6E Access Point with 2.5GbE uplink delivers tri-band wireless speeds up to 10.2 Gbps with 4×4 MIMO for enterprise-grade deployments.
Original price was: ₹49,999.000.₹38,999.000Current price is: ₹38,999.000.
9 in stock
9 in stock
To pick up today
Free
Our courier will deliver to the specified address
2-5 Days
Free
Fast Air Cargo delivery
DTDC Air courier will deliver to the specified address
1-2 Days
Starting From INR 240 Only
The Ubiquiti U6-Enterprise is a high-performance WiFi 6E UniFi Access Point designed for businesses, enterprise offices, educational institutions, hotels, healthcare facilities, retail environments, and other deployments that require fast, reliable, and scalable wireless connectivity.
Built around the WiFi 6E standard, the U6-Enterprise adds the 6 GHz wireless band alongside the traditional 2.4 GHz and 5 GHz bands. This provides additional spectrum for compatible WiFi 6E clients and can help reduce congestion in environments where many wireless devices are operating simultaneously.
The access point features a 2.5 GbE RJ45 uplink, 10 spatial streams, 4×4 MIMO on both 5 GHz and 6 GHz, and 2×2 MIMO on 2.4 GHz. Ubiquiti specifies a maximum aggregate data rate of up to 10.2 Gbps across the three radios and a coverage area of approximately 140 m² (1,500 ft²) under its stated specifications. It is also rated for 600+ clients.
For organizations building a professional UniFi wireless network, the U6-Enterprise provides a strong combination of high-speed wireless performance, modern WiFi security, multi-band connectivity, centralized management, and 2.5GbE wired backhaul.
The U6-Enterprise is a tri-band WiFi 6E access point from Ubiquiti’s UniFi ecosystem.
Unlike conventional dual-band WiFi access points that operate on 2.4 GHz and 5 GHz, WiFi 6E introduces the 6 GHz band. This additional spectrum provides more wireless channels for compatible devices and can be particularly useful in high-density environments.
The access point supports:
The 2.4 GHz radio uses 2×2 MIMO, while both the 5 GHz and 6 GHz radios use 4×4 MIMO. This gives the device a total of 10 spatial streams.
The U6-Enterprise also uses a 2.5 GbE Ethernet uplink, allowing the wired network connection to better match the high wireless capacity of the access point.
WiFi 6E extends the capabilities of WiFi 6 by introducing the 6 GHz spectrum.
For compatible client devices, the 6 GHz band can provide additional spectrum with less legacy-device congestion compared with traditional 2.4 GHz and 5 GHz networks.
This can be useful in environments such as:
The benefits of 6 GHz depend on client compatibility, regulatory availability, channel configuration, building conditions, and the local wireless environment.
Therefore, the U6-Enterprise should be selected as part of an overall WiFi design rather than simply based on the presence of the 6 GHz band.
The U6-Enterprise operates three wireless radios:
The 2.4 GHz radio uses 2×2 MIMO and supports a maximum stated data rate of 573.5 Mbps.
This band is useful for devices that prioritize range and compatibility, including many IoT devices and older wireless clients.
The 5 GHz radio uses 4×4 MIMO and supports a maximum stated data rate of 4.8 Gbps using 160 MHz channel bandwidth.
5 GHz remains an important band for high-performance WiFi clients and devices that do not support 6 GHz.
The 6 GHz radio also uses 4×4 MIMO and provides a maximum stated data rate of 4.8 Gbps using 160 MHz channel bandwidth.
The additional spectrum available through 6 GHz makes this radio particularly useful for compatible WiFi 6E clients in dense wireless environments.
Ubiquiti lists a combined maximum radio data rate of up to 10.2 Gbps across the three bands. Actual client throughput will vary depending on client capability, channel width, signal strength, interference, network infrastructure, and other environmental factors.
A high-performance wireless access point needs a suitable wired connection.
The U6-Enterprise includes a 2.5 GbE RJ45 Ethernet interface, providing a faster wired uplink than conventional Gigabit Ethernet.
This is especially important when multiple users are connected to the access point simultaneously.
Using a 2.5GbE PoE switch can help prevent a traditional 1GbE uplink from becoming a bottleneck in deployments where wireless traffic is high.
A recommended architecture can look like:
Internet / Gateway → 2.5GbE PoE Switch → U6-Enterprise → WiFi Clients
For larger installations, multiple access points can be connected to managed PoE switches and centrally configured through the UniFi ecosystem.
The U6-Enterprise uses PoE+ for power.
Ubiquiti specifies a maximum power consumption of approximately 22W. An appropriate PoE+ switch or compatible power solution should therefore be used for installation.
Using PoE provides a cleaner installation because the access point can receive both power and network connectivity through the same Ethernet cable.
This makes it suitable for ceiling and wall installations where running a separate electrical power connection may be inconvenient.
Wireless performance depends on more than the advertised WiFi generation.
The U6-Enterprise features:
This results in 10 spatial streams across the three radios.
4×4 MIMO on the 5 GHz and 6 GHz radios provides additional spatial-stream capacity for compatible clients and contributes to the access point’s high overall wireless performance.
However, the actual number of spatial streams used during a connection depends on the client device. A smartphone with a 2×2 radio, for example, cannot use all four spatial streams available from the access point.
The U6-Enterprise is particularly well suited to locations where many wireless clients need simultaneous connectivity.
Examples include:
Employees may connect laptops, smartphones, tablets, VoIP devices, and other wireless equipment throughout the day.
Meetings can create temporary high-density wireless usage with many smartphones and laptops connecting simultaneously.
Classrooms and lecture halls can have large numbers of students and staff using wireless devices at the same time.
Guest rooms, lobbies, conference areas, and restaurants can require reliable wireless connectivity for many users.
Shared office environments can have a constantly changing client population with high bandwidth requirements.
Modern retail locations may use wireless POS terminals, employee devices, inventory systems, guest WiFi, and IoT equipment.
In all these environments, access point placement and RF planning remain important. A high-performance AP does not eliminate the need for proper wireless design.
The U6-Enterprise is part of the Ubiquiti UniFi ecosystem, which provides centralized management for compatible UniFi networking equipment.
Depending on the deployment, administrators can manage wireless networks, SSIDs, client devices, VLANs, security settings, firmware, access points, and other network components through the UniFi Network platform.
This makes the product particularly attractive to organizations that want to manage multiple access points from a single interface.
For example, a company with ten offices can deploy multiple UniFi access points and manage them through a centralized UniFi environment rather than configuring every AP independently.
When multiple access points are deployed, centralized management becomes increasingly important.
UniFi allows administrators to maintain consistent wireless settings across the network.
This can include:
A properly configured multi-AP environment can provide a much more consistent user experience than independently configured access points.
The U6-Enterprise supports wireless features designed to improve roaming and radio management.
Ubiquiti lists support for:
These features can help create a more efficient wireless environment when properly configured.
Fast roaming can be especially useful in offices, hotels, campuses, warehouses, and other environments where users move between access point coverage areas.
The access point supports UniFi guest networking features, including captive portal functionality.
Organizations can create a dedicated guest SSID and isolate guest users from internal resources.
Captive portal functionality can be useful for:
UniFi supports features such as customizable landing pages, voucher authentication, password authentication, payment-based authentication, and external portal support depending on the deployment configuration.
The U6-Enterprise supports VLAN functionality through 802.1Q.
This makes it possible to map different SSIDs to different network segments.
For example:
| SSID | VLAN | Purpose |
|---|---|---|
| Office-WiFi | 10 | Employees |
| Guest-WiFi | 20 | Visitors |
| IoT-WiFi | 30 | Smart Devices |
| Management | 40 | Network Management |
This approach allows network administrators to separate traffic logically and apply different policies to different user groups.
The gateway and managed switch should also be configured appropriately for VLAN tagging and routing.
The U6-Enterprise supports modern wireless security options including WPA-PSK and WPA-Enterprise, with support for WPA, WPA2, and WPA3 security protocols.
For business networks, WPA-Enterprise can be useful when centralized authentication is required.
Organizations can choose the appropriate security architecture according to their user environment and IT policies.
Security configuration should be designed alongside VLAN segmentation, firewall policies, guest isolation, and authentication requirements.
One of the biggest reasons to select the U6-Enterprise over a conventional WiFi 6 access point is its 6 GHz capability.
The 6 GHz radio is designed for compatible WiFi 6E clients.
This can provide access to additional spectrum and help reduce congestion in suitable environments.
However, not every laptop, smartphone, tablet, or IoT device supports WiFi 6E.
For this reason, businesses should evaluate their client fleet before choosing a 6 GHz-focused deployment.
The U6-Enterprise continues to support 2.4 GHz and 5 GHz, allowing older and non-6E clients to remain connected.
The access point supports channel bandwidths up to 160 MHz on compatible WiFi 6/6E configurations.
Wider channels can provide higher peak wireless data rates, but actual performance depends on spectrum availability and interference.
In congested RF environments, narrower channel widths may sometimes provide a more reliable experience than simply selecting the widest possible channel.
Professional WiFi deployments should therefore balance performance, channel availability, client density, and interference.
Ubiquiti lists an approximate coverage area of 140 m² (1,500 ft²) and a maximum client count of 600+ for the U6-Enterprise.
These figures should be treated as manufacturer specifications rather than guaranteed real-world performance.
Actual WiFi coverage can vary considerably based on:
For larger buildings, multiple APs may be required to provide consistent coverage and capacity.
The U6-Enterprise is designed for wall or ceiling installation and includes a mounting system.
Its dimensions are approximately 220 mm in diameter and 48 mm in height, while the device weighs approximately 960 g without the mount.
Ceiling mounting is generally preferred for many office deployments because it can provide more even wireless coverage, but the ideal location depends on the building layout.
The Ubiquiti U6-Enterprise can be used in a variety of professional environments.
Provide high-performance wireless connectivity for employees, guests, conference rooms, and business applications.
Deploy multiple access points with centralized UniFi management across different floors or buildings.
Provide WiFi for guests, staff, meeting areas, and common spaces.
Support large numbers of students and staff using laptops, tablets, and smartphones.
Connect POS systems, staff devices, inventory equipment, and guest WiFi.
Provide wireless connectivity for handheld terminals, scanners, laptops, and operational devices.
Support wireless access for authorized users and devices where appropriate network planning and security policies are implemented.
The U6-Enterprise works best when considered as part of a complete UniFi network rather than as an isolated wireless device.
A typical deployment may include:
UniFi Cloud Gateway
Provides routing, firewall, VPN, and network management.
UniFi PoE Switch
Provides wired connectivity and PoE power to access points.
U6-Enterprise
Provides high-performance WiFi 6E connectivity.
Additional UniFi Access Points
Extend wireless coverage and capacity throughout the building.
If you are comparing different models before purchasing, you can explore the complete Ubiquiti UniFi Access Points collection at IPVoice Technologies to choose an AP based on coverage, WiFi generation, client density, mounting requirements, and network speed.
| Specification | Details |
|---|---|
| Brand | Ubiquiti |
| Product Family | UniFi |
| Model | U6-Enterprise |
| Product Type | WiFi 6E Access Point |
| Wireless Standard | WiFi 6E |
| Wireless Bands | 2.4 GHz / 5 GHz / 6 GHz |
| Spatial Streams | 10 |
| 2.4 GHz MIMO | 2×2 |
| 5 GHz MIMO | 4×4 |
| 6 GHz MIMO | 4×4 |
| 2.4 GHz Max Data Rate | 573.5 Mbps |
| 5 GHz Max Data Rate | 4.8 Gbps |
| 6 GHz Max Data Rate | 4.8 Gbps |
| Aggregate Radio Data Rate | Up to 10.2 Gbps |
| Uplink | 1 × 2.5 GbE RJ45 |
| Power Method | PoE+ |
| Maximum Power Consumption | 22W |
| Coverage Area | Approx. 140 m² / 1,500 ft² |
| Maximum Client Count | 600+ |
| Channel Width | Up to 160 MHz |
| Wireless Security | WPA-PSK, WPA-Enterprise, WPA/WPA2/WPA3 |
| VLAN | 802.1Q |
| Wireless Mesh | Supported |
| Fast Roaming | 802.11r |
| BSS Transition | 802.11v |
| Radio Resource Management | 802.11k |
| Management | Ethernet / Bluetooth |
| Mounting | Wall / Ceiling |
| Dimensions | Ø220 × 48 mm |
| Weight | 960 g without mount |
| Operating Temperature | -30°C to 60°C |
| Operating Humidity | 5–95% non-condensing |
| Certifications | CE, FCC, IC |
Specifications are based on Ubiquiti’s current technical documentation. Actual wireless performance depends on client hardware, channel conditions, regulatory environment, network design, and installation.
The U6-Enterprise is a good fit for organizations that need modern WiFi 6E connectivity and have compatible client devices.
It is particularly suitable for:
For smaller deployments with limited users, a lower-cost UniFi access point may provide better value. The U6-Enterprise makes more sense when 6 GHz capability, 2.5GbE uplink, higher wireless capacity, and enterprise-oriented features justify the investment.
For best performance, the access point should be connected to a suitable 2.5GbE PoE+ switch where possible.
The switch should support the required PoE standard and provide adequate power budget for the number of access points being deployed.
Before installation, consider:
For large deployments, a professional wireless survey can help determine the number and placement of access points.
The most important difference is the addition of the 6 GHz band.
A conventional WiFi 6 access point generally operates on 2.4 GHz and 5 GHz.
The U6-Enterprise adds 6 GHz while retaining both existing bands.
This makes it a strong option for organizations that are gradually moving toward WiFi 6E-compatible laptops, smartphones, tablets, and other devices.
The 2.5GbE uplink is another major advantage because it provides a faster wired connection than standard Gigabit Ethernet.
The U6-Enterprise combines modern wireless technology with the centralized management capabilities of the UniFi ecosystem.
Its strongest advantages include:
WiFi 6E: Access to 6 GHz spectrum for compatible clients.
2.5GbE uplink: Faster wired connectivity for high-throughput deployments.
10 spatial streams: High radio capacity across the three wireless bands.
4×4 MIMO: High-performance 5 GHz and 6 GHz radios.
PoE+: Simple power and data delivery over Ethernet.
UniFi management: Centralized configuration and monitoring.
Enterprise features: VLANs, guest isolation, roaming, RRM, captive portal, and modern wireless security.
The U6-Enterprise is a tri-band WiFi 6E UniFi Access Point designed for professional and high-density wireless networks. It supports 2.4 GHz, 5 GHz, and 6 GHz bands and includes a 2.5GbE uplink.
Yes. The U6-Enterprise supports WiFi 6E and operates across 2.4 GHz, 5 GHz, and 6 GHz wireless bands.
Ubiquiti specifies up to 573.5 Mbps on 2.4 GHz and up to 4.8 Gbps each on the 5 GHz and 6 GHz radios, resulting in a stated aggregate radio data rate of up to 10.2 Gbps. Actual client speeds vary according to device capability and network conditions.
Yes. The access point has one 2.5GbE RJ45 Ethernet interface, which is used for network connectivity and PoE power.
The U6-Enterprise uses PoE+ for power. Ubiquiti specifies maximum power consumption of approximately 22W.
Ubiquiti lists a maximum client count of 600+. Actual recommended client density depends on application type, traffic requirements, RF conditions, and deployment design.
Ubiquiti specifies approximately 140 m² (1,500 ft²) coverage. Actual coverage can vary significantly depending on walls, building materials, AP placement, interference, client devices, and required signal quality.
Yes. The product supports WPA-PSK and WPA-Enterprise security options, including WPA, WPA2, and WPA3.
Yes. The U6-Enterprise is part of the UniFi ecosystem and is managed through the UniFi Network platform. This allows administrators to configure and monitor compatible wireless networks centrally.
Yes. Its WiFi 6E capability, 2.5GbE uplink, 10 spatial streams, PoE+ operation, centralized UniFi management, VLAN support, roaming features, and high client capacity make it suitable for many professional and business WiFi deployments.
The Ubiquiti U6-Enterprise is a high-performance UniFi access point designed for organizations that need more than basic dual-band wireless connectivity.
Its combination of WiFi 6E, 6 GHz support, 4×4 MIMO on 5 GHz and 6 GHz, 2.5GbE uplink, PoE+ power, 10 spatial streams, centralized UniFi management, and enterprise wireless features makes it a strong choice for modern business networks.
The access point is particularly valuable for organizations that already have, or are planning to deploy, WiFi 6E-compatible client devices and want to build a scalable UniFi wireless infrastructure.
For a complete deployment, the access point should be paired with an appropriately sized PoE+ switch, suitable gateway, structured cabling, and properly planned wireless coverage.
If you are comparing different UniFi models, explore the complete Ubiquiti UniFi Access Points collection at IPVoice Technologies to select the right access point according to coverage, client density, wireless generation, uplink speed, and deployment requirements.
Brand: Ubiquiti
Model: U6-Enterprise
Series: UniFi
Product Type: WiFi 6E Access Point
Uplink: 2.5GbE
Power: PoE+
Wireless: 2.4 GHz + 5 GHz + 6 GHz
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account 9 in stock
Nigam Bohra –
Best tri-band Access Point